Date: Wed, 14 Feb 2007 10:28:30 GMT From: "Anton A. Vesnin"<freeman@bsd-admin.org> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/109161: synaptic touchpad doesn't works Message-ID: <200702141028.l1EASUh5084533@www.freebsd.org> Resent-Message-ID: <200702141030.l1EAU4o3010829@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 109161
>Category: kern
>Synopsis: synaptic touchpad doesn't works
>Confidential: no
>Severity: non-critical
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Feb 14 10:30:03 GMT 2007
>Closed-Date:
>Last-Modified:
>Originator: Anton A. Vesnin
>Release: 6.2
>Organization:
>Environment:
FreeBSD daemon 6.2-STABLE FreeBSD 6.2-STABLE #1: Tue Jan 16 03:36:28 MSK 2007 root@daemon:/usr/obj/usr/src/sys/DELL_D820_OPT i386
>Description:
Synaptic tochpad doesn't works on my new laptop (dell latitude D820), I set
hw.psm.synaptics_support=1 in my /boot/loader.conf as writen in psm(4), but nothing was changed. Here is verbose dmesg, may be it will help:
========================
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #1: Tue Jan 16 03:36:28 MSK 2007
root@daemon:/usr/obj/usr/src/sys/DELL_D820_OPT
Preloaded elf kernel "/boot/kernel/kernel" at 0xc1110000.
Preloaded elf module "/boot/kernel/geom_eli.ko" at 0xc11101c4.
Preloaded elf module "/boot/kernel/crypto.ko" at 0xc1110274.
Preloaded elf module "/boot/kernel/zlib.ko" at 0xc1110320.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc11103cc.
Preloaded elf module "/boot/kernel/pf.ko" at 0xc1110478.
Preloaded elf module "/boot/kernel/if_bge.ko" at 0xc1110520.
Preloaded elf module "/boot/kernel/sound.ko" at 0xc11105cc.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc1110678.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc1110724.
Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc11107d0.
Preloaded elf module "/boot/kernel/pccard.ko" at 0xc111087c.
Preloaded elf module "/boot/kernel/cbb.ko" at 0xc1110928.
Preloaded elf module "/boot/kernel/exca.ko" at 0xc11109d0.
Preloaded elf module "/boot/kernel/wlan_acl.ko" at 0xc1110a7c.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc1110b2c.
Preloaded elf module "/boot/kernel/wlan_tkip.ko" at 0xc1110bd8.
Preloaded elf module "/boot/kernel/wlan_wep.ko" at 0xc1110c88.
Preloaded elf module "/boot/modules/fuse.ko" at 0xc1110d38.
Preloaded elf module "/boot/kernel/ng_ubt.ko" at 0xc1110de4.
Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc1110e90.
Preloaded elf module "/boot/kernel/snd_hda.ko" at 0xc1110f40.
Preloaded elf module "/boot/kernel/if_ndis.ko" at 0xc1110fec.
Preloaded elf module "/boot/kernel/ndis.ko" at 0xc1111098.
Preloaded elf module "/boot/modules/bcmwl5_sys.ko" at 0xc1111144.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc11111f4.
Table 'FACP' at 0x3fe92800
Table 'APIC' at 0x3fe93000
MADT: Found table at 0x3fe93000
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
INTR: Adding local APIC 0 as a target
ACPI APIC Table: <DELL M07 >
Calibrating clock(s) ... i8254 clock: 1193202 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1997340732 Hz
CPU: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz (1997.34-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20100000<NX,LM>
AMD Features2=0x1<LAHF>
Cores per package: 2
real memory = 1072238592 (1022 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001428000 - 0x000000003ec4efff, 1031958528 bytes (251943 pages)
avail memory = 1031651328 (983 MB)
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
bios32: Found BIOS32 Service Directory header at 0xc00ffa00
bios32: Entry = 0xffa10 (c00ffa10) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xadb6
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
wlan: <802.11 MAC ACL support>
wlan: mac acl policy registered
crypto: <crypto core>
feeder_register: snd_unit=0 snd_maxautovchans=4 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
acpi0: <DELL M07 > on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000054
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: wakeup code va 0xd927e000 pa 0x9d000
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 9 10 11
Validation 0 9 N 0 9 10 11
After Disable 0 255 N 0 9 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 5 7
Validation 0 255 N 0 5 7
After Disable 0 255 N 0 5 7
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 9 10 11
Validation 0 255 N 0 9 10 11
After Disable 0 255 N 0 9 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 5 7 9 10 11
Validation 0 11 N 0 5 7 9 10 11
After Disable 0 255 N 0 5 7 9 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 14 15
After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x27a0, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27a1, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x27d8, revid=0x01
bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base dfffc000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 21
found-> vendor=0x8086, dev=0x27d0, revid=0x01
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x27d2, revid=0x01
bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x27d4, revid=0x01
bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=c, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x27d6, revid=0x01
bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=d, irq=255
powerspec 2 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x8086, dev=0x27c8, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type 4, range 32, base 0000bf80, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x27c9, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 0000bf60, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 21
found-> vendor=0x8086, dev=0x27ca, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
map[20]: type 4, range 32, base 0000bf40, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 22
found-> vendor=0x8086, dev=0x27cb, revid=0x01
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type 4, range 32, base 0000bf20, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x27cc, revid=0x01
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base ffa80000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 20
found-> vendor=0x8086, dev=0x2448, revid=0xe1
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b9, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27c4, revid=0x01
bus=0, slot=31, func=2
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000bfa0, size 4, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27da, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0101, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=3
map[20]: type 4, range 32, base 000010c0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xdd000000-0xdfefffff
pcib1: prefetched decode 0xc0000000-0xcfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x01d7, revid=0xa1
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base dd000000, size 24, enabled
pcib1: requested memory range 0xdd000000-0xddffffff: good
map[14]: type 3, range 64, base c0000000, size 28, enabled
pcib1: requested memory range 0xc0000000-0xcfffffff: good
map[1c]: type 1, range 64, base de000000, size 24, enabled
pcib1: requested memory range 0xde000000-0xdeffffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
nvidia0: <GeForce Go 7300> mem 0xdd000000-0xddffffff,0xc0000000-0xcfffffff,0xde000000-0xdeffffff irq 16 at device 0.0 on pci1
nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xdd000000
nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xc0000000
nvidia0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xde000000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
nvidia0: [GIANT-LOCKED]
pcm0: <Intel 82801G High Definition Audio Controller> mem 0xdfffc000-0xdfffffff irq 21 at device 27.0 on pci0
pcm0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xdfffc000
ioapic0: routing intpin 21 (PCI IRQ 21) to vector 50
pcm0: [MPSAFE]
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib2: secondary bus 11
pcib2: subordinate bus 11
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci11: <ACPI PCI bus> on pcib2
pci11: physical bus=11
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pcib3: secondary bus 12
pcib3: subordinate bus 12
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xdcf00000-0xdcffffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci12: <ACPI PCI bus> on pcib3
pci12: physical bus=12
found-> vendor=0x14e4, dev=0x4311, revid=0x01
bus=12, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message
map[10]: type 1, range 32, base dcffc000, size 14, enabled
pcib3: requested memory range 0xdcffc000-0xdcffffff: good
pcib3: matched entry for 12.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
ndis0: <Dell Wireless 1390 WLAN Mini-PCI Card> mem 0xdcffc000-0xdcffffff irq 17 at device 0.0 on pci12
ndis0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xdcffc000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51
ndis0: [MPSAFE]
ndis0: NDIS API version: 5.1
ndis0: bpf attached
ndis0: Ethernet address: 00:16:cf:60:70:05
ndis0: bpf attached
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pcib4: secondary bus 9
pcib4: subordinate bus 9
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xdce00000-0xdcefffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci9: <ACPI PCI bus> on pcib4
pci9: physical bus=9
found-> vendor=0x14e4, dev=0x1600, revid=0x02
bus=9, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base dcef0000, size 16, enabled
pcib4: requested memory range 0xdcef0000-0xdcefffff: good
pcib4: matched entry for 9.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 18
bge0: <Broadcom BCM5752 A2, ASIC rev. 0x6002> mem 0xdcef0000-0xdcefffff irq 18 at device 0.0 on pci9
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xdcef0000
bge0: firmware handshake timed out
miibus0: <MII bus> on bge0
brgphy0: <BCM5752 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:15:c5:b7:22:de
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
bge0: [MPSAFE]
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pcib5: secondary bus 13
pcib5: subordinate bus 14
pcib5: I/O decode 0xe000-0xefff
pcib5: memory decode 0xdcc00000-0xdcdfffff
pcib5: prefetched decode 0xd0000000-0xd01fffff
pci13: <ACPI PCI bus> on pcib5
pci13: physical bus=13
uhci0: <UHCI (generic) USB controller> port 0xbf80-0xbf9f irq 20 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
uhci0: [MPSAFE]
uhci0: LegSup = 0x0000
usb0: <UHCI (generic) USB controller> on uhci0
uhci1: <UHCI (generic) USB controller> port 0xbf60-0xbf7f irq 21 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf60
uhci1: [MPSAFE]
uhci1: LegSup = 0x0000
usb1: <UHCI (generic) USB controller> on uhci1
uhci2: <UHCI (generic) USB controller> port 0xbf40-0xbf5f irq 22 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 54
uhci2: [MPSAFE]
uhci2: LegSup = 0x0000
usb2: <UHCI (generic) USB controller> on uhci2
uhci3: <UHCI (generic) USB controller> port 0xbf20-0xbf3f irq 23 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55
uhci3: [MPSAFE]
uhci3: LegSup = 0x0000
usb3: <UHCI (generic) USB controller> on uhci3
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xffa80000-0xffa803ff irq 20 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xffa80000
ehci0: [MPSAFE]
usb4: EHCI version 1.0
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: secondary bus 3
pcib6: subordinate bus 4
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xdcb00000-0xdcbfffff
pcib6: prefetched decode 0xfff00000-0xfffff
pcib6: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib6
pci3: physical bus=3
found-> vendor=0x1217, dev=0x7135, revid=0x21
bus=3, slot=1, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
found-> vendor=0x1217, dev=0x00f7, revid=0x02
bus=3, slot=1, func=4
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base dcbff000, size 12, enabled
pcib6: requested memory range 0xdcbff000-0xdcbfffff: good
map[14]: type 1, range 32, base dcbfe800, size 11, enabled
pcib6: requested memory range 0xdcbfe800-0xdcbfefff: good
pcib6: matched entry for 3.1.INTA
pcib6: slot 1 INTA hardwired to IRQ 19
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
pcib6: cbb0 requested memory range 0xdcb00000-0xdcbfffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xdcb00000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib6: matched entry for 3.1.INTA
pcib6: slot 1 INTA hardwired to IRQ 19
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 56
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x71351217 0x04100007 0x06070021 0x00824000
0x10: 0xdcb00000 0x020000a0 0x20040403 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x04400113
0x40: 0x01cc1028 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x00052403 0x00000000 0x00000000 0x00000000
0xa0: 0xfe020001 0x00c04000 0x00000015 0x0000000a
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x09004000 0x808203ea 0x00000000 0x00400008
0xe0: 0x00820000 0x000b101b 0x83000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci3: <serial bus, FireWire> at device 1.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7M SATA300 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf irq 17 at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 57
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 58
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 60
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
npx0: INT 16 interface
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
fuse4bsd: version 0.3.0, FUSE ABI 7.5
procfs registered
lapic: Divisor 2, Frequency 83222106 hz
Timecounter "TSC" frequency 1997340732 Hz quality -100
Timecounters tick every 2.500 msec
crypto: assign driver 0, flags 6
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
usb0: USB revision 1.0
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
battery0: battery initialization start
battery1: battery initialization start
battery0: battery initialization done, tried 1 times
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 127
uhub0: 2 ports with 2 removable, self powered
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 127
uhub1: 2 ports with 2 removable, self powered
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 127
uhub2: 2 ports with 2 removable, self powered
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 127
uhub3: 2 ports with 2 removable, self powered
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 127
uhub4: 8 ports with 8 removable, self powered
uhub5: Dell product 0xa005, class 9/0, rev 2.00/50.18, addr 126
uhub5: 4 ports with 1 removable, self powered
usbd_fill_iface_data: invalid wMaxPacketSize, addr=125!
usbd_fill_iface_data: invalid wMaxPacketSize, addr=125!
ubt0: <Dell product 0x8103, class 224/1, rev 2.00/24.22, addr 125>
Linux ELF exec handler installed
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
atapicam: atapicam0 already exists; skipping it
ad0: 114473MB <WDC WD1200BEVS-75LAT0 02.06M02> at ata0-master SATA150
ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: <SONY DVD+/-RW DW-Q58A/UDS2> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: HDA_DEBUG: HDA Config: on=0x00000000 off=0x00000000
pcm0: HDA_DEBUG: Starting CORB Engine...
pcm0: HDA_DEBUG: Starting RIRB Engine...
pcm0: HDA_DEBUG: Enabling controller interrupt...
pcm0: HDA_DEBUG: Scanning HDA codecs...
pcm0: HDA_DEBUG: Probing codec: 0
pcm0: HDA_DEBUG: startnode=1 endnode=2
pcm0: HDA_DEBUG: Found AFG nid=1 [startnode=1 endnode=2]
pcm0: HDA_DEBUG: Parsing AFG nid=1 cad=0
pcm0: Vendor: 0x00008384
pcm0: Device: 0x00007690
pcm0: Revision: 0x00000022
pcm0: Stepping: 0x00000001
pcm0: PCI Subvendor: 0x01cc1028
pcm0: Nodes: start=2 endnode=21 total=19
pcm0: HDA_DEBUG: Parsing Ctls...
pcm0: HDA_DEBUG: Parsing vendor patch...
pcm0: HDA_DEBUG: Building AFG tree...
pcm0: HDA_DEBUG: HWiP: HDA Widget Parser - Revision 1
pcm0: HDA_DEBUG: HWiP: Found 2 DAC path using HDA_PARSE_MIXER strategy.
pcm0: HDA_DEBUG: AFG commit...
pcm0: HDA_DEBUG: Ctls commit...
pcm0: [ 2] Ctl nid=11 Bind to NONE
pcm0: [ 4] Ctl nid=17 DISABLED
pcm0: HDA_DEBUG: PCMDIR_PLAY setup...
pcm0: HDA_DEBUG: PCMDIR_REC setup...
pcm0: HDA_DEBUG: OSS mixer initialization...
pcm0: HDA_DEBUG: Pin sense: nid=13 res=0x7fffffff
pcm0: HDA_DEBUG: Enabling headphone/speaker audio routing switching:
pcm0: HDA_DEBUG: index=4 nid=13 pci_subvendor=0x01cc1028 codec=0x83847690
pcm0: HDA_DEBUG: Forcing Soft PCM volume
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "rec":
pcm0: Soft PCM mixer ENABLED
pcm0: HDA_DEBUG: Registering PCM channels...
pcm0: sndbuf_setmap 3e6e5000, 4000; 0xe594a000 -> 3e6e5000
pcm0: sndbuf_setmap 3e6de000, 4000; 0xe594e000 -> 3e6de000
pcm0: <HDA Codec: Sigmatel STAC9220>
pcm0: <HDA Codec ID: 0x83847690>
pcm0: <HDA Driver Revision: 20061210_0037>
pcm0:
pcm0: HDA config/quirks: softpcmvol forcestereo vref
pcm0:
pcm0: +-------------------+
pcm0: | DUMPING HDA NODES |
pcm0: +-------------------+
pcm0:
pcm0: Default Parameter
pcm0: -----------------
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: IN amp: 0x00000000
pcm0: OUT amp: 0x80051f1f
pcm0:
pcm0: nid: 2 [ANALOG]
pcm0: name: audio output
pcm0: widget_cap: 0x000d0401
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: connections: 0
pcm0:
pcm0: nid: 3 [ANALOG]
pcm0: name: audio input
pcm0: widget_cap: 0x001d0541
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000800
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 4 [DIGITAL] [DISABLED]
pcm0: name: audio input
pcm0: widget_cap: 0x00140311
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000005
pcm0: Format: AC3 PCM
pcm0: PCM cap: 0x000e0160
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 96
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=8 [pin: other (none)] [DISABLED]
pcm0:
pcm0: nid: 5 [DIGITAL] [DISABLED]
pcm0: name: audio output
pcm0: widget_cap: 0x00040211
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Stream cap: 0x00000005
pcm0: Format: AC3 PCM
pcm0: PCM cap: 0x000e01e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96
pcm0: connections: 0
pcm0:
pcm0: nid: 6 [DIGITAL] [DISABLED]
pcm0: name: vendor widget
pcm0: widget_cap: 0x00f30201
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: connections: 0
pcm0:
pcm0: nid: 7 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x00300901
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000041
pcm0: connections: 3
pcm0: |
pcm0: + <- nid=2 [audio output] (selected)
pcm0: |
pcm0: + <- nid=8 [pin: other (none)] [DISABLED]
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 8 [DIGITAL] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00430681
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00010024
pcm0: IN EAPD : UNSOL
pcm0: Pin config: 0x40f000f0
pcm0: Pin control: 0x00000020 IN
pcm0: EAPD: 0x00000002
pcm0: connections: 0
pcm0:
pcm0: nid: 9 [DIGITAL] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00400301
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000010
pcm0: OUT
pcm0: Pin config: 0x40f000f1
pcm0: Pin control: 0x00000040 OUT
pcm0: connections: 2
pcm0: |
pcm0: + <- nid=5 [audio output] [DISABLED]
pcm0: |
pcm0: + <- nid=10 [audio selector]
pcm0:
pcm0: nid: 10 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x0030090d
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000841
pcm0: Output amp: 0x80050f00
pcm0: mute=1 step=15 size=5 offset=0
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=12 [audio selector]
pcm0:
pcm0: nid: 11 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x00300105
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Output amp: 0x80051f1f
pcm0: mute=1 step=31 size=5 offset=31
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=7 [audio selector]
pcm0:
pcm0: nid: 12 [ANALOG]
pcm0: name: audio selector
pcm0: widget_cap: 0x0030010d
pcm0: Parse flags: 0x00000006
pcm0: Ctl flags: 0x00000041
pcm0: Output amp: 0x00270400
pcm0: mute=0 step=4 size=39 offset=0
pcm0: connections: 5
pcm0: |
pcm0: + <- nid=16 [pin: line in (jack)] (selected)
pcm0: |
pcm0: + <- nid=15 [pin: Mic in (fixed)]
pcm0: |
pcm0: + <- nid=14 [pin: speaker (fixed)]
pcm0: |
pcm0: + <- nid=13 [pin: headphones out (jack)]
pcm0: |
pcm0: + <- nid=18 [pin: other (none)] [DISABLED]
pcm0:
pcm0: nid: 13 [ANALOG]
pcm0: name: pin: headphones out (jack)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x0000003f
pcm0: ISC TRQD HP OUT IN : UNSOL
pcm0: Pin config: 0x0321101f
pcm0: Pin control: 0x00000080 HP
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 14 [ANALOG]
pcm0: name: pin: speaker (fixed)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000001
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x0000003f
pcm0: ISC TRQD HP OUT IN : UNSOL
pcm0: Pin config: 0x90170310
pcm0: Pin control: 0x00000040 OUT
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 15 [ANALOG]
pcm0: name: pin: Mic in (fixed)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000037
pcm0: ISC TRQD OUT IN : UNSOL
pcm0: Pin config: 0x90a70320
pcm0: Pin control: 0x00000020 IN
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 16 [ANALOG]
pcm0: name: pin: line in (jack)
pcm0: widget_cap: 0x00400181
pcm0: Parse flags: 0x00000002
pcm0: Ctl flags: 0x00000041
pcm0: Pin cap: 0x00001737
pcm0: ISC TRQD OUT IN VREF[ 50 80 GROUND HIZ ] : UNSOL
pcm0: Pin config: 0x0381102e
pcm0: Pin control: 0x00000024 IN
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=11 [audio selector]
pcm0:
pcm0: nid: 17 [ANALOG] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00400104
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000010
pcm0: OUT
pcm0: Pin config: 0x40f000f2
pcm0: Pin control: 0x00000040 OUT
pcm0: Output amp: 0x80051f1f
pcm0: mute=1 step=31 size=5 offset=31
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=19 [audio mixer]
pcm0:
pcm0: nid: 18 [ANALOG] [DISABLED]
pcm0: name: pin: other (none)
pcm0: widget_cap: 0x00400001
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: Pin cap: 0x00000020
pcm0: IN
pcm0: Pin config: 0x40f000f3
pcm0: Pin control: 0x00000020 IN
pcm0: connections: 0
pcm0:
pcm0: nid: 19 [ANALOG]
pcm0: name: audio mixer
pcm0: widget_cap: 0x00200100
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000000
pcm0: connections: 1
pcm0: |
pcm0: + <- nid=7 [audio selector]
pcm0:
pcm0: nid: 20 [ANALOG]
pcm0: name: beep widget
pcm0: widget_cap: 0x0070000c
pcm0: Parse flags: 0x00000000
pcm0: Ctl flags: 0x00000021
pcm0: Output amp: 0x80170303
pcm0: mute=1 step=3 size=23 offset=3
pcm0: connections: 0
pcm0:
pcm0: +------------------------+
pcm0: | DUMPING HDA AMPLIFIERS |
pcm0: +------------------------+
pcm0:
pcm0: 1: nid=10 dir=0x1 index=0 ossmask=0x00000800 ossdev=0
pcm0: 2: nid=11 dir=0x1 index=0 ossmask=0x00000001 ossdev=0
pcm0: 3: nid=12 dir=0x1 index=0 ossmask=0x00000040 ossdev=6
pcm0: 4: nid=17 dir=0x1 index=0 ossmask=0x00000000 ossdev=0 [DISABLED]
pcm0: 5: nid=20 dir=0x1 index=0 ossmask=0x00000020 ossdev=5
pcm0:
pcm0: +-----------------------------------+
pcm0: | DUMPING HDA AUDIO/VOLUME CONTROLS |
pcm0: +-----------------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- nid: 11 index: 0 mute: 1 step: 31 size: 5 off: 31 dir=0x1 ossmask=0x00000001
pcm0:
pcm0: Line-in Volume (OSS: line)
pcm0: |
pcm0: +- nid: 12 index: 0 mute: 0 step: 4 size: 39 off: 0 dir=0x1 ossmask=0x00000040
pcm0:
pcm0: Recording Level (OSS: rec)
pcm0: |
pcm0: +- nid: 10 index: 0 mute: 1 step: 15 size: 5 off: 0 dir=0x1 ossmask=0x00000800
pcm0:
pcm0: Speaker/Beep (OSS: speaker)
pcm0: |
pcm0: +- nid: 20 index: 0 mute: 1 step: 3 size: 23 off: 3 dir=0x1 ossmask=0x00000020
pcm0:
pcm0: Playback path:
pcm0:
pcm0: nid=13 [pin: headphones out (jack)]
pcm0: ^
pcm0: |
pcm0: +-----<------+
pcm0: ^
pcm0: |
pcm0: nid=11 [audio selector]
pcm0: ^
pcm0: |
pcm0: nid=7 [audio selector]
pcm0: ^
pcm0: |
pcm0: nid=2 [audio output]
pcm0:
pcm0: nid=14 [pin: speaker (fixed)]
pcm0: ^
pcm0: |
pcm0: +-----<------+
pcm0: ^
pcm0: |
pcm0: nid=11 [audio selector]
pcm0: ^
pcm0: |
pcm0: nid=7 [audio selector]
pcm0: ^
pcm0: |
pcm0: nid=2 [audio output]
pcm0:
pcm0: Recording sources:
pcm0:
pcm0: nid=12 [audio selector]
pcm0: |
pcm0: + <- nid=16 [pin: line in (jack)] [recsrc: vol, line]
pcm0: |
pcm0: + <- nid=15 [pin: Mic in (fixed)]
pcm0: |
pcm0: + <- nid=14 [pin: speaker (fixed)]
pcm0: |
pcm0: + <- nid=13 [pin: headphones out (jack)]
pcm0:
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: PCM Playback: 1
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: DAC: 2
pcm0:
pcm0: PCM Record: 1
pcm0: Stream cap: 0x00000001
pcm0: Format: PCM
pcm0: PCM cap: 0x000e07e0
pcm0: PCM size: 16 20 24
pcm0: PCM rate: 44 48 88 96 176 192
pcm0: ADC: 3
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 1
ioapic0: Assigning PCI IRQ 17 to local APIC 0
ioapic0: Assigning PCI IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 21 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
ioapic0: Assigning PCI IRQ 23 to local APIC 0
(probe0:ata1:0:0:0): error 22
(probe0:ata1:0:0:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <SONY DVD+-RW DW-Q58A UDS2> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD+-RW DW-Q58A UDS2> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
GEOM: new disk cd0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
uhub6: vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 126
uhub6: 3 ports with 2 removable, bus powered
ugen0: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 125>
=======================
Thanks for helping.
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200702141028.l1EASUh5084533>