Date: Thu, 30 Dec 1999 15:56:44 +0100 (CET) From: Luigi Rizzo <luigi@info.iet.unipi.it> To: Peter Wemm <peter@netplex.com.au> Cc: Bill Swingle <unfurl@dub.net>, multimedia@FreeBSD.ORG, hackers@FreeBSD.ORG, cg@FreeBSD.ORG Subject: Re: soundcards needed to further newpcm development Message-ID: <199912301456.PAA00478@info.iet.unipi.it> In-Reply-To: <19991230145018.757B21CA0@overcee.netplex.com.au> from Peter Wemm at "Dec 30, 1999 10:50:18 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> Luigi Rizzo wrote: > > I have a YMF719E card (that's on the chip itself) that works on a week-old > -current (on an Alpha no less): by "works" i mean work in full duplex. Most reports i got for the '719 is that audio capture seems not to work. I seem to remember the problem is in the mixer -- i.e. you get data out of the codec, but there is no signal. Go figure where the '719 has the mute bits and mixer input select... Does your card really _works_ as above ? cheers luigi > pcm0: <Yamaha SA2> at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 0,1 on isa0 > pcm0: interrupting at ISA irq 5 > joy0: <Generic PnP Joystick> at port 0x201 on isa0 > unknown0: <OPL3-SAX Sound Board> at port 0x100-0x107 on isa0 > unknown1: <Generic ESDI/IDE/ATA controller> at port 0x1e8-0x1ef,0x3ee irq 11 on isa0 > > > I have another machine (toshiba tecra 8000 laptop) with a yamaha-something > in it (this is a PNPBIOS detected device): > > pcm0: <Yamaha OPL-SAx> at port 0x220-0x233,0x530-0x537,0x388-0x38f,0x330-0x333,0x538-0x539 irq 5 drq 1,0 on isa0 > > I seem to recall it too was a YHM0021 pnp id, but I don't know exactly what it > is. > > YMH0021: adding io range 0x220-0x233, size=0x14, align=0x1 > YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1 > YMH0021: adding io range 0x388-0x38f, size=0x8, align=0x1 > YMH0021: adding io range 0x330-0x333, size=0x4, align=0x1 > YMH0021: adding io range 0x538-0x539, size=0x2, align=0x1 > YMH0021: adding irq mask 0x20 > YMH0021: adding dma mask 0x2 > YMH0021: adding dma mask 0x1 > YMH0021: start dependant > pnpbios: handle 21 device ID YMH0021 (2100a865) > > It's not a pnp device like the one on the card in the Alpha system. It's > statically configured by the bios setup. > > Cheers, > -Peter > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-hackers" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199912301456.PAA00478>