Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 10 Sep 2003 14:00:45 +0200
From:      des@des.no (Dag-Erling =?iso-8859-1?q?Sm=F8rgrav?=)
To:        Nate Lawson <nate@root.org>
Cc:        current@freebsd.org
Subject:   Re: ACPI problems on MSI K7D
Message-ID:  <xzpbrts26qa.fsf@dwp.des.no>
In-Reply-To: <20030909100311.T89599@root.org> (Nate Lawson's message of "Tue, 9 Sep 2003 10:08:28 -0700 (PDT)")
References:  <20030906141328.Q78854@root.org> <xzpptia9l12.fsf@dwp.des.no> <20030909100311.T89599@root.org>

next in thread | previous in thread | raw e-mail | index | archive | help
--=-=-=
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

Nate Lawson <nate@root.org> writes:
> Obviously, the pci_open(2) is bogus.  If no one else addresses this, I
> will try to get to it soon.  For now, try changing the panic to a return 0
> and see how it affects system operation.

It boots, but does not find any PCI devices.  See attached log.  (note
that the log shows only one cpu due to a transient bios problem)

DES
--=20
Dag-Erling Sm=F8rgrav - des@des.no


--=-=-=
Content-Disposition: attachment; filename=log.txt

Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 640kB/523200kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.1
(des@meali.registrar.no, Mon Sep  1 18:48:59 CEST 2003)
Loading /boot/defaults/loader.conf 
/boot/kernel/kernel text=0x1eaadc data=0x22608+0x44e34 syms=[0x4+0x2cfa0+0x4+0x372f6]
/boot/kernel/snd_ich.ko text=0x31e4 data=0x284 syms=[0x4+0x960+0x4+0x964]
loading required module 'snd_pcm'
/boot/kernel/snd_pcm.ko text=0x1412c data=0x24d8+0x1124 syms=[0x4+0x2a20+0x4+0x2e0d]
/boot/kernel/usb.ko text=0x1fad0 data=0xc4c+0x168 syms=[0x4+0x2c70+0x4+0x33ce]
/boot/kernel/ums.ko text=0x22e0 data=0x168+0x4 syms=[0x4+0x5f0+0x4+0x52f]

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 8 seconds... 

Type '?' for a list of commands, 'help' for more detailed help.
OK boot -vs
/boot/kernel/acpi.ko text=0x3a9fc data=0x170c+0xec0 syms=[0x4+0x5bf0+0x4+0x7a42]
SMAP type=01 base=0000000000000000 len=00000000000a0000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff3000 len=000000000000d000
SMAP type=04 base=000000001fff0000 len=0000000000003000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #9: Mon Sep  1 19:06:40 CEST 2003
    des@meali.registrar.no:/usr/src/sys/i386/compile/meali
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0454000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc04541d8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0454284.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc0454330.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc04543d8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0454480.
Calibrating clock(s) ... i8254 clock: 1193227 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1800077059 Hz
CPU: AMD Athlon(tm) MP 2200+ (1800.08-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000047e000 - 0x000000001f6c9fff, 522502144 bytes (127564 pages)
avail memory = 516710400 (492 MB)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 1 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00040010, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00fac90
bios32: Entry = 0xfb100 (c00fb100)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb130
pnpbios: Found PnP BIOS data at 0xc00fbb30
pnpbios: Entry = f0000:bb60  Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
SMP: CPU0 bsp_apic_configure():
     lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMD2P  AWRDACPI> on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming model.
acpi0: sleep button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._CRS] (Node 0xc4008ec0), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._CRS] (Node 0xc4008ec0), AE_NOT_EXIST
can't fetch resources for \_SB_.PCI0.LNKA - AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._CRS] (Node 0xc4008dc0), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._CRS] (Node 0xc4008dc0), AE_NOT_EXIST
can't fetch resources for \_SB_.PCI0.LNKB - AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._CRS] (Node 0xc4008cc0), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._CRS] (Node 0xc4008cc0), AE_NOT_EXIST
can't fetch resources for \_SB_.PCI0.LNKC - AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._CRS] (Node 0xc4008bc0), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._CRS] (Node 0xc4008bc0), AE_NOT_EXIST
can't fetch resources for \_SB_.PCI0.LNKD - AE_NOT_EXIST
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lp0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
psm0: unable to allocate IRQ
unknown: not probed (disabled)
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKA._STA] (Node 0xc4008f20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKB._STA] (Node 0xc4008e20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKC._STA] (Node 0xc4008d20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80ff003c
pci_open(2):	mode 2 enable port (0x0cf8) is 0xff
    ACPI-0438: *** Error: Handler for [PCI_Config] returned AE_NOT_EXIST
    ACPI-1287: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
    ACPI-0175: *** Error: Method execution failed [\_SB_.PCI0.LNKD._STA] (Node 0xc4008c20), AE_NOT_EXIST
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
SMP: enabled INTs: 1, 3, 4, 6, 7, 9, apic_imen: 0xfffffd25
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Timecounter "TSC" frequency 1800077059 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
Mounting root from ufs:/dev/ad0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6

Manual root filesystem specification:
  <fstype>:<device>  Mount <device> using filesystem <fstype>
                       eg. ufs:da0s1a
  ?                  List valid disk boot devices
  <empty line>       Abort manual input

mountroot> 
panic: Root mount failed, startup aborted.
cpuid = 0; lapic.id = 00000000
Debugger("panic")
Stopped at      Debugger+0x4e:  xchgl   %ebx,in_Debugger.0
db> call cpu_reset

--=-=-=--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?xzpbrts26qa.fsf>