Date: Wed, 20 Dec 2006 04:44:49 GMT From: kozo<kakehi@kme.co.jp> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/106960: 6.2 can't find SATA secondary drive, but 6.1 can find. Message-ID: <200612200444.kBK4ineI098633@www.freebsd.org> Resent-Message-ID: <200612200450.kBK4oCnm051829@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 106960
>Category: misc
>Synopsis: 6.2 can't find SATA secondary drive, but 6.1 can find.
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Dec 20 04:50:11 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator: kozo
>Release: 6.2-PRERELEASE
>Organization:
KUME DENKI CO.LTD.
>Environment:
FreeBSD pp.kme.co.jp 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #3: Tue Dec 19 19:52:39 JST 2006 root@pp.kme.co.jp:/usr/
obj/usr/src/sys/GENERIC-KK i386
>Description:
6.2-PRERELEASE(RC1) can't find SATA 2nd ch's drive.
6.1-Stable (Sep.2006) can find SATA 2nd ch's drive as ad10.
If force boot from SATA-2nd (by BIOS setting), 6.2-PRERELEASE can boot, but can't find ad10.
ad8(SATA ch0:ata4) and ad10(SATA ch1:ata5) has same disklabels.
# /dev/ad8s1:
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
a: 1048576 0 4.2BSD 2048 16384 8
b: 2044560 1048576 swap
c: 625137282 0 unused 0 0 # "raw" part, don't edit
d: 3119104 3093136 4.2BSD 2048 16384 28552
e: 1048576 6212240 4.2BSD 2048 16384 8
f: 16777216 7260816 4.2BSD 2048 16384 28552
g: 601099250 24038032 4.2BSD 2048 16384 28552
d,f,g partitions are gmirrored, and e partition are gstriped.
ccd1,ccd2 are constructed on PATA.
My kernel is GENERIC + ccd,vlan.
CPU: Celeron D352
M/B: ASRock 775Dual-VSTA VIA PT880/VT8237A
dmesg is
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-PRERELEASE #3: Tue Dec 19 19:52:39 JST 2006
root@pp.kme.co.jp:/usr/obj/usr/src/sys/GENERIC-KK
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) D CPU 3.20GHz (3213.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf64 Stepping = 4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR
,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe41d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>,<b15>>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
real memory = 536543232 (511 MB)
avail memory = 515624960 (491 MB)
ioapic0 <Version 0.3> irqs 0-23 on motherboard
ioapic1 <Version 0.3> irqs 24-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI-1304: *** Error: Method execution failed [\\_PR_.CPU1._PDC] (Node 0xc328b780), AE_BAD_HEADER
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, interrupt controller> at device 0.5 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 27 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ti0: <Netgear GA620 1000baseSX Gigabit Ethernet> mem 0xff6f8000-0xff6fbfff irq 17 at device 9.0 on pci0
ti0: Ethernet address: 00:a0:cc:73:48:73
ti0: if_start running deferred for Giant
ti0: [GIANT-LOCKED]
atapci0: <ITE IT8212F UDMA133 controller> port 0xd400-0xd407,0xcc00-0xcc03,0xc880-0xc887,0xc800-0xc803,0xc480-0xc48f ir
q 16 at device 12.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237A SATA150 controller> port 0xe000-0xe007,0xdc00-0xdc03,0xd880-0xd887,0xd800-0xd803,0xd480-0xd48f,0xd0
00-0xd0ff irq 21 at device 15.0 on pci0
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
atapci2: <VIA 8237A UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
uhci0: <VIA 83C572 USB controller> port 0xe080-0xe09f irq 20 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 22 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xe480-0xe49f irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 23 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xff6ff800-0xff6ff8ff irq 21 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe800-0xe8ff mem 0xff6ffc00-0xff6ffcff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:13:8f:e7:2a:63
pcib3: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci128: <ACPI PCI bus> on pcib3
pci128: <multimedia> at device 1.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3213544728 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, unlimited logging
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, default to deny, logging unlimited
ad4: 76319MB <Seagate ST380021A 3.10> at ata2-master UDMA100
ad4: Adaptec unknown RAID type 0x05
ad5: 76319MB <Seagate ST380021A 3.19> at ata2-slave UDMA100
ad5: Adaptec unknown RAID type 0x05
ad6: 114473MB <Seagate ST3120026A 8.01> at ata3-master UDMA100
ad7: 114473MB <Seagate ST3120026A 3.54> at ata3-slave UDMA100
ad8: 305245MB <Hitachi HDT725032VLA380 V54OA52A> at ata4-master SATA150
GEOM_MIRROR: Device var created (id=2716759581).
GEOM_MIRROR: Device var: provider ad8s1d detected.
GEOM_STRIPE: Device tmp created (id=1326731203).
GEOM_STRIPE: Disk ad8s1e attached to tmp.
GEOM_MIRROR: Device usr created (id=2964578398).
GEOM_MIRROR: Device usr: provider ad8s1f detected.
GEOM_MIRROR: Device home created (id=3919327070).
GEOM_MIRROR: Device home: provider ad8s1g detected.
Root mount waiting for: GMIRROR GMIRROR GMIRROR
Root mount waiting for: GMIRROR GMIRROR GMIRROR
Root mount waiting for: GMIRROR GMIRROR GMIRROR
Root mount waiting for: GMIRROR GMIRROR GMIRROR
GEOM_MIRROR: Force device var start due to timeout.
GEOM_MIRROR: Device var: provider ad8s1d activated.
GEOM_MIRROR: Device var: provider mirror/var launched.
Root mount waiting for: GMIRROR GMIRROR
GEOM_MIRROR: Force device usr start due to timeout.
GEOM_MIRROR: Device usr: provider ad8s1f activated.
GEOM_MIRROR: Device usr: provider mirror/usr launched.
GEOM_MIRROR: Force device home start due to timeout.
GEOM_MIRROR: Device home: provider ad8s1g activated.
GEOM_MIRROR: Device home: provider mirror/home launched.
Trying to mount root from ufs:/dev/ad8s1a
ccd1: mirror/parity forces uniform flag
ccd2: mirror/parity forces uniform flag
ti0: gigabit link up
>How-To-Repeat:
Every time.
>Fix:
Nothing.
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200612200444.kBK4ineI098633>