Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 30 Dec 2003 12:31:10 -0500
From:      Tim Kellers <timothyk@wallnet.com>
To:        questions@freebsd.org
Cc:        kellers@njit.edu
Subject:   snd_maestro3.ko load/unload
Message-ID:  <200312301231.10684.timothyk@wallnet.com>

Next in thread | Raw E-Mail | Index | Archive | Help
FreeBSD 10.0.1.8 4.9-STABLE FreeBSD 4.9-STABLE #0: Mon Dec 29 15:59:28 EST 
2003     root@10.0.1.8:/usr/obj/usr/src/sys/PORCINUS  i386

Hardware: Dell Latitude c800 laptop

soundcard (from BIOS): maestro3

If I load snd_maestro3.ko from loader.conf (snd_pcm.ko is auto-loaded along 
with it), I get no sound in CLI or X --no beeps no anything.

If I don't load anything from loader.conf, I get keyclicks (enabled in BIOS), 
but no ^G beeps in CLI or X.

If I don't load anything from loader.conf, then kldload snd_maestro3.ko, then 
kldunload snd_maestro3.ko, then kldload snd_maestro3.ko again, keyclicks, ^G 
beeps and full stereo sound works in X.

I've built (and rebuilt) ther kernel with device pcm, without device pcm -- 
the method described above works with no device pcm.

I can make sound work by scripting the load/unload/reload process as 
zzz.maestro.sh and placing it in /usr/local/etc/rc.d.

Has anyone experienced anything similar, or does anyone have any ideas what 
might be going on?

I don't have this problem with 4.9_STABLE or 5.2-CURRENT on Dell C600 
latitudes --they use the same maestro3 card.

Tim Kellers
CPE/NJIT



Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?200312301231.10684.timothyk>