Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 6 Jul 2015 19:33:29 +0000 (UTC)
From:      Neel Natu <neel@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org
Subject:   svn commit: r285217 - head/usr.sbin/bhyve
Message-ID:  <201507061933.t66JXTtJ050058@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: neel
Date: Mon Jul  6 19:33:29 2015
New Revision: 285217
URL: https://svnweb.freebsd.org/changeset/base/285217

Log:
  Always assert DCD and DSR in bhyve's uart emulation.
  
  The /etc/ttys entry for a serial console in FreeBSD/x86 is as follows:
  ttyu0   "/usr/libexec/getty 3wire"      vt100   onifconsole secure
  
  The initial terminal type passed to getty(8) is "3wire" which sets the
  CLOCAL flag. However reset(1) clears this flag and any programs that try
  to open the terminal will hang waiting for DCD to be asserted.
  
  Fix this by always asserting DCD and DSR in the emulated uart.
  
  The following discussion on virtualization@ has more details:
  https://lists.freebsd.org/pipermail/freebsd-virtualization/2015-June/003666.html
  
  Reported by: jmg
  Discussed with: grehan

Modified:
  head/usr.sbin/bhyve/uart_emul.c

Modified: head/usr.sbin/bhyve/uart_emul.c
==============================================================================
--- head/usr.sbin/bhyve/uart_emul.c	Mon Jul  6 19:30:29 2015	(r285216)
+++ head/usr.sbin/bhyve/uart_emul.c	Mon Jul  6 19:33:29 2015	(r285217)
@@ -272,6 +272,37 @@ uart_opentty(struct uart_softc *sc)
 	assert(sc->mev != NULL);
 }
 
+static uint8_t
+modem_status(uint8_t mcr)
+{
+	uint8_t msr;
+
+	if (mcr & MCR_LOOPBACK) {
+		/*
+		 * In the loopback mode certain bits from the MCR are
+		 * reflected back into MSR.
+		 */
+		msr = 0;
+		if (mcr & MCR_RTS)
+			msr |= MSR_CTS;
+		if (mcr & MCR_DTR)
+			msr |= MSR_DSR;
+		if (mcr & MCR_OUT1)
+			msr |= MSR_RI;
+		if (mcr & MCR_OUT2)
+			msr |= MSR_DCD;
+	} else {
+		/*
+		 * Always assert DCD and DSR so tty open doesn't block
+		 * even if CLOCAL is turned off.
+		 */
+		msr = MSR_DCD | MSR_DSR;
+	}
+	assert((msr & MSR_DELTA_MASK) == 0);
+
+	return (msr);
+}
+
 /*
  * The IIR returns a prioritized interrupt reason:
  * - receive data available
@@ -304,6 +335,7 @@ uart_reset(struct uart_softc *sc)
 	divisor = DEFAULT_RCLK / DEFAULT_BAUD / 16;
 	sc->dll = divisor;
 	sc->dlh = divisor >> 16;
+	sc->msr = modem_status(sc->mcr);
 
 	rxfifo_reset(sc, 1);	/* no fifo until enabled by software */
 }
@@ -363,7 +395,7 @@ uart_write(struct uart_softc *sc, int of
 	uint8_t msr;
 
 	pthread_mutex_lock(&sc->mtx);
-	
+
 	/*
 	 * Take care of the special case DLAB accesses first
 	 */
@@ -426,22 +458,7 @@ uart_write(struct uart_softc *sc, int of
 		case REG_MCR:
 			/* Apply mask so that bits 5-7 are 0 */
 			sc->mcr = value & 0x1F;
-
-			msr = 0;
-			if (sc->mcr & MCR_LOOPBACK) {
-				/*
-				 * In the loopback mode certain bits from the
-				 * MCR are reflected back into MSR
-				 */
-				if (sc->mcr & MCR_RTS)
-					msr |= MSR_CTS;
-				if (sc->mcr & MCR_DTR)
-					msr |= MSR_DSR;
-				if (sc->mcr & MCR_OUT1)
-					msr |= MSR_RI;
-				if (sc->mcr & MCR_OUT2)
-					msr |= MSR_DCD;
-			}
+			msr = modem_status(sc->mcr);
 
 			/*
 			 * Detect if there has been any change between the



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201507061933.t66JXTtJ050058>