Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 1 Feb 2017 08:38:15 +0000
From:      krad <kraduk@gmail.com>
To:        Warner Losh <imp@bsdimp.com>
Cc:        Andreas Nilsson <andrnils@gmail.com>, FreeBSD Stable <freebsd-stable@freebsd.org>,  Aristedes Maniatis <ari@ish.com.au>
Subject:   Re: Boot partition size
Message-ID:  <CALfReydp4-mQk%2BHOg6yQUKYB-OfNjUuqSBjT-99Zp9YtbBJSog@mail.gmail.com>
In-Reply-To: <CANCZdfqfN7vRrRrJd8bdSmo1Bwx0btGdMEopkbzqxGEfyMkmBQ@mail.gmail.com>
References:  <a4cab85a-5e79-c7c1-fbb7-d9cf83cbf556@ish.com.au> <20170129141244.GA63867@in-addr.com> <CAOjFWZ6WRQ5i4OP5ZK89RxM1YpMbVp%2BcOHCSvUyUx0etizUmog@mail.gmail.com> <851efa44-0607-231f-0905-8f9c96a36237@ish.com.au> <CALfReyfwuuN_HQ_8iszwdpLJPCy-LagoeoEEBoXJnZW6sgus6Q@mail.gmail.com> <CAPS9%2BSvGaHzf%2BwEJqsByOUtejAwkjppk%2BkEUEW_5cgtjnszsOA@mail.gmail.com> <CANCZdfqfN7vRrRrJd8bdSmo1Bwx0btGdMEopkbzqxGEfyMkmBQ@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Are we really that worried about 90-99 MB when we are talking about many TB
drives? Even the entry-mid range SSD are in the region of 256-512 GB these
days?

On 31 January 2017 at 14:35, Warner Losh <imp@bsdimp.com> wrote:

> The UEFI standard suggests something large like 100MB. There are a
> number of firmware updating programs that run as .efi images.  It
> would be prudent to allow more than the bare minimum in case you wind
> up needing them down the line. boot1.efi is likely to grow
> significantly in the future. Maybe not 100x, a 1MB is likely once it
> has all the features it needs. 10MB might be a safe upper bound.
>
> Warner
>
> On Tue, Jan 31, 2017 at 7:00 AM, Andreas Nilsson <andrnils@gmail.com>
> wrote:
> > Well,  100mb might be relevant if you ever want to dual-boot. The
> relevant
> > efi file seems to be < 100k
> >
> > It may go up in size, but I doubt we will see a 100x increase.
> >
> > /A
> >
> > On Tue, Jan 31, 2017 at 1:03 PM, krad <kraduk@gmail.com> wrote:
> >
> >> Its worth noting you should also go for GPT layout and have a 100meg or
> so
> >> partition provisioned as well so you can do a uefi boot. Even if you
> arent
> >> going to use it right now.
> >>
> >>
> >> On 30 January 2017 at 03:41, Aristedes Maniatis <ari@ish.com.au> wrote:
> >>
> >> > On 30/1/17 2:20pm, Freddie Cash wrote:
> >> > > And, you may be able to do that on the existing disks, as ZFS now
> >> leaves
> >> > a MB or two of "slack space" at the end of the device used in the
> vdev.
> >> > This allows for using drives/partitions that are the same size in MB
> but
> >> > have different numbers of sectors. This was an issue on the early ZFS
> >> days.
> >> > >
> >> > > So, you may be able to resize the freebsd-zfs partition by a
> handful of
> >> > KB without actually changing the size of the vdev.
> >> >
> >> >
> >> > Brilliant, thank you. That worked a treat with a new boot size of
> 256k.
> >> >
> >> >
> >> > Note that this page: https://wiki.freebsd.org/
> >> RootOnZFS/GPTZFSBoot/Mirror
> >> > needs to be adjusted. This line:
> >> >
> >> >     gpart add -b 34 -s 128k -t freebsd-boot ad0
> >> >
> >> > needs to instead be
> >> >
> >> >     gpart add -a 4k -s 512k -t freebsd-boot ad0
> >> >
> >> >
> >> > I don't have edit rights. Probably someone needs to clean up and merge
> >> > many of these pages: https://wiki.freebsd.org/RootOnZFS/
> >> >
> >> >
> >> > Ari
> >> >
> >> >
> >> >
> >> > --
> >> > -------------------------->
> >> > Aristedes Maniatis
> >> > CEO, ish
> >> > https://www.ish.com.au
> >> > GPG fingerprint CBFB 84B4 738D 4E87 5E5C  5EFA EF6A 7D2E 3E49 102A
> >> >
> >> >
> >> _______________________________________________
> >> freebsd-stable@freebsd.org mailing list
> >> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@
> freebsd.org"
> >>
> > _______________________________________________
> > freebsd-stable@freebsd.org mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org
> "
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CALfReydp4-mQk%2BHOg6yQUKYB-OfNjUuqSBjT-99Zp9YtbBJSog>