Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 02 Mar 2012 09:08:05 -0500
From:      sean <tech.junk@myfairpoint.net>
To:        freebsd-questions@freebsd.org
Subject:   Re: USB Logitech QuickCam Ultra Vision
Message-ID:  <4F50D445.5070708@myfairpoint.net>
In-Reply-To: <4F50C05B.10303@herveybayaustralia.com.au>
References:  <4F4FDB25.5020400@myfairpoint.net> <4F50139F.6050203@herveybayaustralia.com.au> <20120302054811.a72c89c8.dcdowse@gmx.net> <20120302060453.GA3506@tinyCurrent> <4F50BD99.7090509@myfairpoint.net> <4F50C05B.10303@herveybayaustralia.com.au>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
On 03/02/12 07:43, Da Rock wrote:
> On 03/02/12 22:31, sean wrote:
>> On 03/02/12 01:04, Matthias Apitz wrote:
>>> El día Friday, March 02, 2012 a las 05:48:11AM +0100, Daniel C. 
>>> Dowse escribió:
>>>
>>>> Hi,
>>>>
>>>> usbconfig -d ugenX.Y do_request 0x22 0x01 0x100 0x86 0x03 0x80 0xBB 
>>>> 0x00
>>>> usbconfig -d ugenX.Y reset
>>>> usbconfig -d ugenX.Y do_request 0x22 0x01 0x100 0x86 0x03 0x80 0xBB 
>>>> 0x00
>>>>
>>>> and then restart webcamd.
>>>>
>>>> may help, it worked on my Logitech Business Pro Cam
>>>>
>>>> cheers
>>> FWHIW, such quirks are also shown in 
>>> http://wiki.freebsd.org/WebcamCompat
>>> and once your webcam is working fine it could show up there too;
>>>
>>> HIH
>>>
>>>     matthias
>>

>> Installed devices:
>> pcm0: <AMD-8111> (play/rec) default
>> pcm1: <USB audio> (rec)
> Bang! There it is. pcm1 - see the (rec) following it?
>
> Adjust the levels using `mixer -f /dev/mixer1` and away you go, happy 
> conferencing ;)

Well I adjusted the volume as you pointed out, still no luck.
Currently I am thinking I might need to get the usbconfig command above 
to now work, but it gives a nondescript error.

tardis# usbconfig
ugen4.2: <product 0x08c9 vendor 0x046d> at usbus4, cfg=0 md=HOST 
spd=HIGH (480Mbps) pwr=ON

tardis# lsusb
Bus /dev/usb Device /dev/ugen4.2: ID 046d:08c9 Logitech, Inc. QuickCam 
Ultra Vision

tardis# usbconfig -d ugen4.2 do_request 0x22 0x01 0x100 0x86 0x03 0x80 
0xBB 0x00
REQUEST = <ERROR>
tardis#

I have looked at the man pages in trying to figure out exactly what the 
eight number sets after do-request are doing, thinking that I might have 
to adjust them for some reason. I am also starting to wonder if my 
camera mic will work with Skype.

I ran the mic test listed on the webcam site, 
http://wiki.freebsd.org/WebcamCompat .
tardis# dd if=/dev/dsp1.0 of=/dev/dsp0.0 bs=64
^C1073+0 records in
1073+0 records out
68672 bytes transferred in 8.571198 secs (8012 bytes/sec)
tardis#

The test works, the mic picked me up and played it through the speakers, 
with some nasty loop feedback, but it did work.






Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?4F50D445.5070708>