Date: Fri, 21 Feb 97 16:18:54 Pacific Standard Time From: "Sean J. Schluntz" <schluntz@pinpt.com> To: "Sean J. Schluntz" <schluntz@pinpt.com>, Nate Williams <nate@mt.sri.com> Cc: Nate Williams <nate@mt.sri.com>, Rob Miracle <rwm@mpgn.com>, stable@freebsd.org Subject: Re: Problems with 3COM Etherlink III PCMCIA card Message-ID: <Chameleon.856571007.List@journeyman> References: <199702212342.QAA04438@rocky.mt.sri.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> > > > Yes. The card specificlly is a 3C589D. > > > > > Hmm, I haven't yet heard a 'working' report from a 3C589D, so I don't > > > know if the 'zp' driver works with it. I have heard that the ep driver > > > works, but it's a nightmare to setup right now (my fault). > > > > > > What are the parameters that *DOS* (w/out card-services running) states > > > that the card is configured for? > > > > I had no problem with the 2.2-SNAP from about November (Or what ever one was > > on line then.) It let me load the system through FTP with out a problem. > > Really? Rob couldn't get the CIS tuple from the 589D to be valid. Hmm.. ... ze: pcmcia slot1: 3Com Corporation~3C589~TP/BNC LAN Card Ver. 2a~000002~ ... zp0 at 0x300-0x30f irq 10 maddr 0xd8000 in isa zp0: aui/bnc/utp address 00:a0:24:aa:11:a7 ... That's with the 2.2-GAMMA boot.flp. Default Kernal boot from the menu, no mods. Looks like when I did it before (Though this time I don't have a bracket to put the spare HD in my laptop to do a full install, but last time it worked great!) -Sean ---------------------------------------------------------------------- Sean J. Schluntz <schluntz@pinpt.com> Manager, Support Services ph. 408.997.6900 x222 PinPoint Software Corporation fx. 408.323.2300 6155 Almaden Expressway, Suite 100 San Jose, CA. 95120 http://www.pinpt.com/ Local Time Sent: 02/21/97 16:18:55 ----------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Chameleon.856571007.List>