Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 28 Dec 1996 22:21:18 -0800 (PST)
From:      "Rodney W. Grimes" <rgrimes@GndRsh.aac.dev.com>
To:        brandon@glacier.cold.org (Brandon Gillespie)
Cc:        freebsd-hardware@freebsd.org
Subject:   Re: AHA 2940UW? Linux works..
Message-ID:  <199612290621.WAA00617@GndRsh.aac.dev.com>
In-Reply-To: <Pine.NEB.3.95.961224102248.27912A-100000@glacier.cold.org> from Brandon Gillespie at "Dec 24, 96 10:29:00 am"

next in thread | previous in thread | raw e-mail | index | archive | help
> I REALLY need help with this, our server is continually rebooting since we
> installed the AHA 2940UW controller and new UltraSCSI drive.  It is not a
> heavilly loaded system, but it does run a database system that NEEDS to
> syncronize its database before shutting down.  Every time this system
> reboots we loose critical data to the last backup.  This is flat out
> unacceptable.  I really like FreeBSD much more than Linux, but at this
> point others in the group are suggesting we move to Linux because they
> know this hardware works fine in Linux.  In my experience I've never known
> a system to simply reboot when it was a hardware problem (generally if its
> a hardware problem it simply freezes up or does not work at all).  This is
> working for two to three days when suddenly *wham* reboot.
> 
> Help??

My experience in tracking down ``spontainious reboots'' on FreeBSD systems
is that this is usually either memory or a bad motherboard.  If I recall
your earlier mail you had converted from IDE to AHA2940, which leads me to
suspect a motherboard problem in the cache invalidation logic with 
respect to bus mastered DMA.  

You didn't saymuch else about the hardware, and ``it'll run Linux'' doesn't
tell me much, as Linux does not do a lot of the performance enhancements
in FreeBSD that requires _CORRECTLY_ designed boards.

Hardware problems _often_ cause exactly what you are seeing, but then so
do software problems.


-- 
Rod Grimes                                      rgrimes@gndrsh.aac.dev.com
Accurate Automation, Inc.                   Reliable computers for FreeBSD



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199612290621.WAA00617>