Date: Tue, 24 May 2005 11:08:57 -0400 From: "Jonathan M. Slivko" <freebsd-lists@slivko.org> To: Franco Bruno Borghesi <fborghesi@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: 3Ware SATA RAID 8000 - Supported on 5.3-R? Message-ID: <42934389.9020307@slivko.org> In-Reply-To: <e13c14ec050524080654677a58@mail.gmail.com> References: <50408.70.18.16.72.1116942842.squirrel@www.slivko.org> <e13c14ec050524075978735028@mail.gmail.com> <429341E4.5000108@slivko.org> <e13c14ec050524080654677a58@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
root@bonjour(~)% cat /etc/fstab # Device Mountpoint FStype Options Dump Pass# /dev/twed0s1b none swap sw 0 0 /dev/twed0s1a / ufs rw 1 1 /dev/twed0s1g /home ufs rw,userquota,groupquota 2 2 /dev/twed0s1d /tmp ufs rw 2 2 /dev/twed0s1e /usr ufs rw 2 2 /dev/twed0s1f /var ufs rw 2 2 /dev/acd0 /cdrom cd9660 ro,noauto 0 0 none /proc procfs rw 0 0 root@bonjour(~)% Franco Bruno Borghesi wrote: > Could you post your /etc/fstab? > > 2005/5/24, Jonathan M. Slivko <freebsd-lists@slivko.org>: > >>Yes, this is actually the autoboot fsck thats breaking, the one that is >>called from /etc/rc (via /etc/rc.d/). I can physically take the box down >>and do an offline fsck of it and that works fine, it's just when it's in >>multi-user mode thats the problem. >> >>-- Jonathan >> >>Franco Bruno Borghesi wrote: >> >>>For fsck to work (to actually correct any problems you may have), >>>partitions should be umounted first. Are you sure you have umounted >>>/dev/twedXXXX before running fsck? >>> >>> >>>2005/5/24, Jonathan M. Slivko <freebsd-lists@slivko.org >>><mailto:freebsd-lists@slivko.org>>: >>> >>>Hello, >>> >>>I have an interesting question, I have a Pentium 4 2.4Ghz (No HT >>>Enabled), >>>2x80GB SATA Hard Drives in RAID 1. The box boots, works, etc. However, >>>whenever you try and do an fsck -y, it says: >>> >>>root@bonjour (~)% fsck -y >>>** /dev/twed0s1a (NO WRITE) >>>** Last Mounted on / >>>** Root file system >>>** Phase 1 - Check Blocks and Sizes >>>** Phase 2 - Check Pathnames >>>** Phase 3 - Check Connectivity >>>** Phase 4 - Check Reference Counts >>>** Phase 5 - Check Cyl groups >>>2821 files, 31805 used, 474682 free (322 frags, 59295 blocks, 0.1% >>>fragmentation) >>> >>>** /dev/twed0s1g (NO WRITE) >>>** Last Mounted on /home >>>** Phase 1 - Check Blocks and Sizes >>>** Phase 2 - Check Pathnames >>>** Phase 3 - Check Connectivity >>>** Phase 4 - Check Reference Counts >>>** Phase 5 - Check Cyl groups >>>82057 files, 557735 used, 12912399 free (2343 frags, 1613757 blocks, >>>0.0% >>>fragmentation) >>> >>>** /dev/twed0s1d (NO WRITE) >>>** Last Mounted on /tmp >>>** Phase 1 - Check Blocks and Sizes >>>** Phase 2 - Check Pathnames >>>** Phase 3 - Check Connectivity >>>** Phase 4 - Check Reference Counts >>>** Phase 5 - Check Cyl groups >>>30 files, 1787 used, 504700 free (20 frags, 63085 blocks, 0.0% >>>fragmentation) >>> >>>** /dev/twed0s1e (NO WRITE) >>>** Last Mounted on /usr >>>** Phase 1 - Check Blocks and Sizes >>>** Phase 2 - Check Pathnames >>>** Phase 3 - Check Connectivity >>>** Phase 4 - Check Reference Counts >>>** Phase 5 - Check Cyl groups >>>251160 files, 1318908 used, 13912410 free (73346 frags, 1729883 blocks, >>>0.5% fragmentation) >>> >>>** /dev/twed0s1f (NO WRITE) >>>** Last Mounted on /var >>>** Phase 1 - Check Blocks and Sizes >>>** Phase 2 - Check Pathnames >>>** Phase 3 - Check Connectivity >>>** Phase 4 - Check Reference Counts >>>** Phase 5 - Check Cyl groups >>>4424 files, 63321 used, 7042830 free (2462 frags, 880046 blocks, 0.0% >>>fragmentation) >>> >>>The drives are Seagate SATA's (7200RPM) with a 3Ware SATA RAID >>>Controller >>>(8006-2LP) using the twe kernel driver. The drives themselves allow data >>>to be read to/written from them, but fsck will not work (and is hanging >>>things on boot). >>> >>>Anyone got any ideas? I looked at www.3ware.com <http://www.3ware.com>; >>><http://www.3ware.com>; earlier and it says that >>>the 8006-2LP's support FreeBSD 4.x, but not 5.x - could this be a result >>>of that, seeing as otherwise the drives/RAID work fine (AFAIK, it could >>>not be and I'm just not sure how to test it). >>> >>>TIA, >>>-- Jonathan >>>_______________________________________________ >>>freebsd-questions@freebsd.org <mailto:freebsd-questions@freebsd.org> >>>mailing list >>>http://lists.freebsd.org/mailman/listinfo/freebsd-questions >>>To unsubscribe, send any mail to " >>>freebsd-questions-unsubscribe@freebsd.org >>><mailto:freebsd-questions-unsubscribe@freebsd.org>" >>> >>> >> >>-- >>Jonathan M. Slivko - jonathan@slivko.org >>"Linux: The Choice for the GNU Generation" >>- http://www.linux.org/ - >> >>Don't fear the penguin. >>.^. >>/V\ >>/( )\ >>^^-^^ >>He's here to help. >> > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" -- Jonathan M. Slivko - jonathan@slivko.org "Linux: The Choice for the GNU Generation" - http://www.linux.org/ - Don't fear the penguin. .^. /V\ /( )\ ^^-^^ He's here to help.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42934389.9020307>