Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 20 Jan 2001 19:22:12 +0100
From:      Andreas Klemm <andreas@freebsd.org>
To:        stable@freebsd.org
Subject:   =?iso-8859-1?Q?sound_doesn=B4t_work_anymore_after_upgrading_to_last_4=2E?= =?iso-8859-1?Q?2_STABLE?=
Message-ID:  <20010120192212.A551@aklemm.klemm.gtn.com>

next in thread | raw e-mail | index | archive | help

--HlL+5n6rz5pIUxbD
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Hi !

After upgrading my 4.2-STABLE from Jan. 09th 2001 to the last recent
version and updating the kernel, my Laptops (Toshiba Satellite Pro 4360)
soundcard doesn=B4t work anymore.

During boot I see the follogin message:
pcm0: ac97 codec invalid or not present (id =3D=3D 0)

Error messages in the xconsole when trying to use the soundcard
(mpg123):
pcm0: play interrupt timeout, channel dead
pcm0: play interrupt timeout, channel dead

Below dmesg output and kernel config file.

Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.2-STABLE #0: Sat Jan 20 16:22:47 CET 2001
    root@aklemm.klemm.gtn.com:/usr/src/sys/compile/AKLEMM
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (696.58-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x683  Stepping =3D 3
  Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  =3D 201195520 (196480K bytes)
avail memory =3D 192446464 (187936K bytes)
Preloaded elf kernel "kernel" at 0xc0304000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc030409c.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc02ad242 (1000022)
VESA: S3 Incorporated. M7 BIOS
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 model 8c12 graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 5.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on=
 pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 5.2 irq 11
chip1: <Intel 82371AB Power management controller> port 0xfe70-0xfe7f at de=
vice 5.3 on pci0
pci0: <unknown card> (vendor=3D0x11c1, dev=3D0x0441) at 7.0 irq 3
pci0: <unknown card> (vendor=3D0x1179, dev=3D0x0d01) at 9.0 irq 11
chip2: <PCI to CardBus bridge (vendor=3D1179 device=3D0617)> at device 11.0=
 on pci0
chip3: <PCI to CardBus bridge (vendor=3D1179 device=3D0617)> at device 11.1=
 on pci0
pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff80=
00-0xefffffff irq 11 at device 12.0 on pci0
pcm0: ac97 codec invalid or not present (id =3D=3D 0)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^  !!!!!!!!!!!!!!!!!!!!!!
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <9 virtual consoles, flags=3D0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ppi0: <Parallel I/O> on ppbus0
pccard: card inserted, slot 0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s2a
xe0 at port 0x2e8-0x2ef iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0
xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
xe0: DingoID =3D 0x444b, RevisionID =3D 0x1, VendorID =3D 0
xe0: Ethernet address 00:10:a4:bb:11:e8
IP packet filtering initialized, divert disabled, rule-based forwarding dis=
abled, default to deny, logging disabled
xe0: watchdog timeout; resetting card
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 =
at device 5.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
/dev/vmmon: Module vmmon: registered with major=3D200 minor=3D0 tag=3D$Name=
: build-570 $
/dev/vmmon: Module vmmon: initialized
xe0: promiscuous mode enabled
vmnet1: promiscuous mode enabled
pcm0: play interrupt timeout, channel dead
pcm0: play interrupt timeout, channel dead

My kernel config:


machine		i386
cpu		I686_CPU
ident		AKLEMM
maxusers	100

options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	MD_ROOT			#MD is a potential root device
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	UCONSOLE		#Allow users to grab the console
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options		SHMSEG=3D150
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options		ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options		PQ_NORMALCACHE
options		MROUTING

device		isa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
options 	ATA_STATIC_ID		#Static device numbering
options 	ATA_ENABLE_ATAPI_DMA	#Enable DMA on ATAPI devices

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?
options		MAXCONS=3D9
options		SC_HISTORY_SIZE=3D1024
options 	SC_PIXEL_MODE
options		VESA

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0    at nexus? flags 0x20

# PCCARD (PCMCIA) support
device		card
device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device

# Xircom Ethernet
device		xe

# sound support
device		pcm

# Pseudo devices - the number indicates how many units to allocated.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	ppp	1	# Kernel PPP
options 	PPP_BSDCOMP	#PPP BSD-compress support
options 	PPP_DEFLATE	#PPP zlib/deflate/gzip support
options 	PPP_FILTER	#enable bpf filtering (needs bpf)
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	gif	4	# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

	Andreas ///

--=20
Andreas Klemm - Powered by FreeBSD 4.2 SMP
Need a magic printfilter today ? -> http://www.apsfilter.org/

--HlL+5n6rz5pIUxbD
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.4 (FreeBSD)
Comment: Weitere Infos: siehe http://www.gnupg.org

iD8DBQE6addTd3o+lGxvbLoRAvkkAJ0dmLzpMLWuZ0cIvCAW3ovWExotfQCgiAmj
DywYcLXcq3FuFmha+SBIVQo=
=+ALq
-----END PGP SIGNATURE-----

--HlL+5n6rz5pIUxbD--



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010120192212.A551>