Date: Tue, 07 Sep 1999 21:44:44 +0100 From: Steve Darrall <steve@haagen-dazs.org> To: mobile@freebsd.org Subject: pccardc output confusing Message-ID: <19990907204412.2E88015AA9@hub.freebsd.org>
next in thread | raw e-mail | index | archive | help
Well, I've got a network connection, now I just need to get a dialup PPP
connection working...
When my modem gets inserted, I get the usual "driver allocation failed for IBM"
I'm presuming that this is for the same reason as for my ethernet adapter, in
that I'm using the wrong IRQ for the card.
Which of the tuples should I be taking the IRQ and I/O information from?
Thanks again for your help, I'm determined to get this thing up and runnning
sometime tonight.
Steve
The pccard.conf entry for the card is...
# IBM Modem thingymajigwhatsit
card "IBM" "PCMCIA 33.6 Kbps Internationa"
config 0x31 "sio1" 13
sio1 is compiled into my kernel as...
device sio1 at isa? port "IO_COM2" tty irq 13
The output from pccardc dumpcis on slot 0 (my modem) is....
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x20 (Manufacturer ID), length = 4
000: 05 01 01 01
PCMCIA ID = 0x105, OEM ID = 0x101
Tuple #3, code = 0x15 (Version 1 info), length = 63
000: 04 01 49 42 4d 00 50 43 4d 43 49 41 20 33 33 2e
010: 36 20 4b 62 70 73 20 49 6e 74 65 72 6e 61 74 69
020: 6f 6e 61 6c 20 44 61 74 61 2d 46 61 78 20 4d 6f
030: 64 65 6d 00 34 2e 30 2e 37 00 00 00 00 00 ff
Version = 4.1, Manuf = [IBM],card vers = [PCMCIA 33.6 Kbps International
Data-Fax Modem]
Addit. info = [4.0.7],[]
Tuple #4, code = 0x1a (Configuration map), length = 5
000: 01 27 00 01 17
Reg len = 2, config register addr = 0x100, last config = 0x27
Registers: XXX-X---
Tuple #5, code = 0x1b (Configuration entry), length = 20
000: f0 41 9d 6e 4d 5d 25 36 05 eb 17 aa 60 f8 03 07
010: 70 b8 86 28
Config index = 0x30(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 2 x 10mA
Max current average over 10 ms: 3 x 100mA
Power down supply current: 1 x 10mA
RDY/BSY scale Speed = 1.2 x 10 ms, scaled by 100
Card decodes 23 address lines
IRQ modes:
IRQs: NMI IOCK BERR 0 1 2 4 9 11 13 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Read-only) (Power down supported) (Ext byte = 0
x3)
Tuple #6, code = 0x1b (Configuration entry), length = 10
000: 31 18 aa 60 f8 02 07 70 b8 86
Config index = 0x31
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
IRQ modes: Level, Pulse
IRQs: 4 5 6 11 12 13 15
Tuple #7, code = 0x21 (Functional ID), length = 2
000: 02 01
Serial port/modem - POST initialize
Tuple #8, code = 0x0 (Null tuple), length = 21
000: 00 00 00 00 00 00 80 22 ff 00 ff ff ff ff ff ff
010: ff ff ff ff ff
Tuple #9, code = 0x1b (Configuration entry), length = 10
000: 32 18 aa 60 e8 03 07 70 b8 86
Config index = 0x32
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
IRQ modes: Level, Pulse
IRQs: 4 5 6 11 12 13 15
Tuple #10, code = 0x1b (Configuration entry), length = 10
000: 33 18 aa 60 e8 02 07 70 b8 86
Config index = 0x33
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
IRQ modes: Level, Pulse
IRQs: 4 5 6 11 12 13 15
Tuple #11, code = 0x1b (Configuration entry), length = 6
000: 24 18 23 70 b8 86
Config index = 0x24
Card decodes 3 address lines, 8 Bit I/O only
IRQ modes: Level
IRQ level = 3
Tuple #12, code = 0x1b (Configuration entry), length = 10
000: 25 18 aa 60 bc 03 03 70 b8 86
Config index = 0x25
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3bc block length = 0x4
IRQ modes: Level, Pulse
IRQs: 4 5 6 11 12 13 15
Tuple #13, code = 0x1b (Configuration entry), length = 10
000: 26 18 aa 60 78 03 03 70 b8 86
Config index = 0x26
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x378 block length = 0x4
IRQ modes: Level, Pulse
IRQs: 4 5 6 11 12 13 15
Tuple #14, code = 0x1b (Configuration entry), length = 10
000: 27 18 aa 60 78 02 03 70 b8 86
Config index = 0x27
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x278 block length = 0x4
IRQ modes: Level, Pulse
IRQs: 4 5 6 11 12 13 15
Tuple #15, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 7f
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #16, code = 0x22 (Functional EXT), length = 9
000: 01 1f 3f 00 02 00 00 02 00
Modem interface capabilities:
Tuple #17, code = 0x22 (Functional EXT), length = 12
000: 02 06 00 3f 1c 03 03 0f 06 00 00 b5
Data modem services available:
Tuple #18, code = 0x22 (Functional EXT), length = 8
000: 13 06 00 1f 00 00 00 b5
Tuple #19, code = 0xff (Terminator), length = 0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990907204412.2E88015AA9>