Date: Thu, 09 Nov 2000 19:16:28 -0500 From: Rod Taylor <rbt@zort.on.ca> To: freebsd-stable@freebsd.org Subject: CDRom problems with 4.1.1 Message-ID: <3A0B3E5C.E6C8400A@zort.on.ca>
next in thread | raw e-mail | index | archive | help
Lots of the below... Seems to be related to heavy access in the 4th
slot of 4.
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: READ_BIG - HARDWARE ERROR asc=b6 ascq=00 error=04
--
FreeBSD peon.zort.on.ca 4.1.1-STABLE FreeBSD 4.1.1-STABLE #0: Fri Nov 3
09:55:22 EST 2000 rbt@peon.zort.on.ca:/usr/obj/usr/src/sys/KNIGHT
i386
--
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1.1-STABLE #0: Fri Nov 3 09:55:22 EST 2000
rbt@peon.zort.on.ca:/usr/obj/usr/src/sys/KNIGHT
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 402587648 (393152K bytes)
avail memory = 387252224 (378176K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 9
IOAPIC #0 intpin 17 -> irq 10
IOAPIC #0 intpin 18 -> irq 11
IOAPIC #0 intpin 19 -> irq 5
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc0467000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xa000-0xa01f irq
5 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Timecounter "PIIX" frequency 3579545 Hz
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
pcm0: <AudioPCI ES1371> port 0xa400-0xa43f irq 11 at device 11.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xa800-0xa83f mem
0xea000000-0xea0fffff,0xea100000-0xea100fff irq 10 at device 13.0 on
pci0
fxp0: Ethernet address 00:d0:b7:14:dc:35
atapci1: <HighPoint HPT366 ATA66 controller> port
0xb400-0xb4ff,0xb000-0xb003,0xac00-0xac07 irq 11 at device 19.0 on pci0
ata2: at 0xac00 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port
0xc000-0xc0ff,0xbc00-0xbc03,0xb800-0xb807 irq 11 at device 19.1 on pci0
ata3: at 0xb800 on atapci2
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
SMP: AP CPU #1 Launched!
ata2-slave: identify retries exceeded
ad0: 8056MB <SAMSUNG VG38404A> [16368/16/63] at ata0-master UDMA33
ata2-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad4: 19569MB <WDC WD205AA> [39761/16/63] at ata2-master UDMA33
ad6: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata3-master UDMA33
acd0: CDROM <ATAPI CDROM> at ata0-slave using PIO4
acd1-4: CDROM with 4 CD changer <NEC CD-ROM DRIVE:251> at ata1-master
using PIO3
acd5-8: CDROM with 4 CD changer <NEC CD-ROM DRIVE:251> at ata1-slave
using PIO3
Mounting root from ufs:/dev/ad0s1a
cd9660: RockRidge Extension
cd9660: RockRidge Extension
cd9660: RockRidge Extension
cd9660: RockRidge Extension
IP Filter: already initialized
IP Filter: v3.4.8 unloaded
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
IP Filter: already initialized
IP Filter: v3.4.8 unloaded
acd1-4: READ_BIG - ILLEGAL REQUEST asc=64 ascq=00 error=04
pid 6342 (grep), uid 1000: exited on signal 3 (core dumped)
pid 6341 (cat), uid 1000: exited on signal 3 (core dumped)
pid 6213 (grep), uid 1000: exited on signal 3 (core dumped)
pid 6343 (psql), uid 1000: exited on signal 3 (core dumped)
cd9660: RockRidge Extension
cd9660: RockRidge Extension
pid 10447 (ssh), uid 1000: exited on signal 3
pid 11194 (fetch), uid 0: exited on signal 3 (core dumped)
pid 11285 (fetch), uid 0: exited on signal 3 (core dumped)
pid 12168 (communicator-4.7), uid 1000: exited on signal 10 (core
dumped)
pid 12242 (communicator-4.7), uid 1000: exited on signal 10 (core
dumped)
pid 26509 (ssh), uid 0: exited on signal 3
pid 26517 (ssh), uid 1000: exited on signal 3
pid 26518 (ping), uid 1000: exited on signal 3
pid 26535 (ping), uid 1000: exited on signal 3
pid 26536 (ssh), uid 1000: exited on signal 3
pid 26538 (ssh), uid 1000: exited on signal 3
pid 12278 (communicator-4.7), uid 1000: exited on signal 10 (core
dumped)
pid 34457 (mpeg_play), uid 1000: exited on signal 6 (core dumped)
pid 34614 (xanim), uid 1000: exited on signal 11 (core dumped)
pid 34932 (ssh), uid 1000: exited on signal 3
pid 35836 (communicator-4.7), uid 1000: exited on signal 10 (core
dumped)
pid 35882 (communicator-4.7), uid 1000: exited on signal 10 (core
dumped)
pid 36803 (bzip2), uid 0: exited on signal 3 (core dumped)
pid 36804 (tar), uid 0: exited on signal 3 (core dumped)
pid 75668 (rm), uid 0: exited on signal 3 (core dumped)
pid 75087 (communicator-4.7), uid 1000: exited on signal 10 (core
dumped)
pid 13472 (du), uid 1000: exited on signal 3 (core dumped)
pid 9600 (communicator-4.7), uid 1000: exited on signal 10 (core dumped)
IP Filter: not initialized
pid 79725 (communicator-4.7), uid 1000: exited on signal 10 (core
dumped)
pid 79766 (communicator-4.7), uid 1000: exited on signal 10 (core
dumped)
pid 83279 (pkg_delete), uid 1000: exited on signal 3
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: READ_BIG - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: READ_BIG - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: READ_BIG - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: READ_BIG - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: READ_BIG - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: LOAD_UNLOAD - HARDWARE ERROR asc=b6 ascq=00 error=04
acd1-4: READ_BIG - HARDWARE ERROR asc=b6 ascq=00 error=04
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A0B3E5C.E6C8400A>