Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 22 Mar 2000 11:46:34 -0800
From:      Matthew Reimer <mreimer@vpop.net>
To:        "Cambria, Mike" <mcambria@lucent.com>
Cc:        multimedia@freebsd.org
Subject:   Re: CS4236B microphone problems
Message-ID:  <38D9231A.3F5FA033@vpop.net>
References:  <lists.freebsd.multimedia.75ADD7496F0BD211ADC000104B8846CF012CED10@rerun.lucentctc.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Try changing some of the other mixer settings; on my CS4237 with newpcm,
the line in is actually controlled by the synth volume (PR16588).

Matt

"Cambria, Mike" wrote:
> 
> Hi,
> 
> I am trying to get the microphone to work on FreeBSD-Release on a new Dell
> Precision 410 Workstation.  According to NT4.0 (and dmesg below)), the
> motherboard has a built in CS4236B.
> 
> I've used the pcm driver to get everything to work except the microphone.
> I've already tried mix to set mic, mix, line in etc. to 100:100, which was
> suggested to others in the mailing list archives.  The pcm0 kernel entries
> are set to what NT shows the values to be, specifically:
> 
> device pcm0 at isa? port 0x534 tty irq 5 drq 1 flags 0x10    (flags should
> say to use dma 0 as the 2ed dma)
> 
> The only thing that doesn't look right is the mss_attach showing the device
> found at 0x530, not 0x534.  BTW, should I be using pcm0 or should it be
> pcm1?
> 
> The output of dmesg, sndstat (in case it is usefull) and pnpinfo are shown
> below.
> 
> Any help is appreciated.
> 
> Thanks,
> MikeC
> 
>  Probing for PnP devices:
>  CSN 1 Vendor ID: CSC6835 [0x3568630e] Serial 0xffffffff Comp ID: @@@0000
>  [0x00000000]
>  mss_attach <CS4236B>1 at 0x530 irq 5 dma 1:0 flags 0x10
>  pcm1 (CS423x/Yamaha/AD1816 <CS4236B> sn 0xffffffff) at 0x530-0x537 irq 5
>  drq 1 flags 0x10 on isa
> 
>  # cat /dev/sndstat
>  FreeBSD Audio Driver (981002) Mar 18 2000 19:22:46
>  Installed devices:
>  pcm1: <CS4236B> at 0x530 irq 5 dma 1:0
>  sequencer1: <???> at 0x388 (not functional)
> 
>  # pnpinfo
>  Checking for Plug-n-Play devices...
> 
>  Card assigned CSN #1
>  Vendor ID CSC6835 (0x3568630e), Serial Number 0xffffffff
>  PnP Version 1.0, Vendor Version 1
>  Device Description: CS4236B
> 
>  Logical Device ID: CSC0000 0x0000630e #0
>  Device Description: WSS/SB
>  TAG Start DF
>  Good Configuration
>      DMA: channel(s) 1 3
>          8-bit, not a bus master, count by byte, , Type A
>      DMA: channel(s) 0 1 3
>          8-bit, not a bus master, count by byte, , Type A
>      IRQ: 5 7 9  - only one type (true/edge)
>      I/O Range 0x534 .. 0x608, alignment 0xd4, len 0x4
>          [16-bit addr]
>      I/O Range 0x388 .. 0x388, alignment 0x8, len 0x4
>          [16-bit addr]
>      I/O Range 0x220 .. 0x240, alignment 0x20, len 0x10
>          [16-bit addr]
>  TAG Start DF
>  Acceptable Configuration
>      DMA: channel(s) 0 1 3
>          8-bit, not a bus master, count by byte, , Type A
>      IRQ: 5 7 9 11 12 15  - only one type (true/edge)
>      I/O Range 0x534 .. 0xffc, alignment 0x4, len 0x4
>          [16-bit addr]
>      I/O Range 0x388 .. 0x3f0, alignment 0x8, len 0x4
>          [16-bit addr]
>      I/O Range 0x220 .. 0x260, alignment 0x10, len 0x10
>          [16-bit addr]
>  TAG End DF
> 
>  Logical Device ID: CSC000f 0x0f00630e #1
>  Device Description: Game
>  TAG Start DF
>  Good Configuration
>      I/O Range 0x3a0 .. 0x3f8, alignment 0x8, len 0x8
>          [16-bit addr]
>  TAG End DF
> 
>  Logical Device ID: CSC0010 0x1000630e #2
>  Device Description: Ctrl
>      I/O Range 0xf00 .. 0xfe8, alignment 0x8, len 0x8
>          [16-bit addr]
>  End Tag
> 
>  Successfully got 26 resources, 3 logical fdevs
>  -- card select # 0x0001
> 
>  CSN CSC6835 (0x3568630e), Serial Number 0xffffffff
> 
>  Logical device #0
>  IO:  0x0534 0x0388 0x0220 0x0000 0x0000 0x0000 0x0000 0x0000
>  IRQ 5 0
>  DMA 1 0
>  IO range check 0x00 activate 0x01
> 
>  Logical device #1
>  IO:  0x03a0 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
>  IRQ 0 0
>  DMA 4 4
>  IO range check 0x00 activate 0x01
> 
>  Logical device #2
>  IO:  0x0f00 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
>  IRQ 0 0
>  DMA 4 4
>  IO range check 0x00 activate 0x01
> 
> Michael C. Cambria                        Lucent Technologies
> Member of Technical Staff                        Bell Labs Innovations
>    Voice: (978) 287 - 2807                300 Baker Avenue
>      Fax: (978) 287 - 2810                Concord, Massachusetts 01742
> Internet:  mcambria@lucent.com <mailto:mcambria@lucent.com>
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-multimedia" in the body of the message


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-multimedia" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38D9231A.3F5FA033>