Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 11 Feb 2008 07:24:55 -1000
From:      Clifton Royston <cliftonr@lava.net>
To:        Remco van Bekkum <remco@spacemarines.us>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: "ad0: TIMEOUT - WRITE_DMA" type errors with 7.0-RC1
Message-ID:  <20080211172454.GB5323@lava.net>
In-Reply-To: <20080211120057.GA5821@marshal.spacemarines.us>
References:  <479A0731.6020405@skyrush.com> <20080125162940.GA38494@eos.sc1.parodius.com> <479A3764.6050800@skyrush.com> <3803988D-8D18-4E89-92EA-19BF62FD2395@mac.com> <479A4CB0.5080206@skyrush.com> <20080126003845.GA52183@eos.sc1.parodius.com> <20080211120057.GA5821@marshal.spacemarines.us>

next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Feb 11, 2008 at 01:00:57PM +0100, Remco van Bekkum wrote:
> On Fri, Jan 25, 2008 at 04:38:46PM -0800, Jeremy Chadwick wrote:
> After having replaced my first SATA disk with one of the same type,
> having still the same errors, I replaced this 1TB drive with 4x500GB
> Hitachi P7K500 in raidz. It worked fine for a week, but yesterday I
> cvsupped and rebuild world. This afternoon everything is breaking down
> again with the same errors:
> 
> Feb 11 12:34:09 xaero kernel: ad6: WARNING - SETFEATURES SET TRANSFER
> MODE taskqueue timeout - completing request directly
> Feb 11 12:34:13 xaero kernel: ad6: WARNING - SETFEATURES SET TRANSFER
> MODE taskqueue timeout - completing request directly
> Feb 11 12:34:17 xaero kernel: ad6: WARNING - SETFEATURES ENABLE RCACHE
> taskqueue timeout - completing request directly
> Feb 11 12:34:21 xaero kernel: ad6: WARNING - SETFEATURES ENABLE WCACHE
> taskqueue timeout - completing request directly
> Feb 11 12:34:25 xaero kernel: ad6: WARNING - SET_MULTI taskqueue timeout
> - completing request directly
> Feb 11 12:34:25 xaero kernel: ad6: FAILURE - WRITE_DMA48 timed out
> LBA=298014274

  Did you try replacing cabling as a previous poster recommended?  I've
had similar problems with both traditional parallel ATA and SATA due to
marginal cables, which of course are not solved by swapping drives.

  Not saying there's not a software problem here, just that there is
still one area to eliminate.
  -- Clifton
 
-- 
    Clifton Royston  --  cliftonr@iandicomputing.com / cliftonr@lava.net
       President  - I and I Computing * http://www.iandicomputing.com/
 Custom programming, network design, systems and network consulting services



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20080211172454.GB5323>