Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 22 Dec 2009 07:42:20 +0200
From:      Andriy Gapon <avg@icyb.net.ua>
To:        Oliver Lehmann <lehmann@ans-netz.de>
Cc:        stable@freebsd.org, hardware@freebsd.org
Subject:   Re: 8-STABLE: support for this SMB controller?
Message-ID:  <4B305C3C.6060703@icyb.net.ua>
In-Reply-To: <20091222063415.9c2284ea.lehmann@ans-netz.de>
References:  <20091221174225.84748c0d.lehmann@ans-netz.de>	<4B2FA913.5030501@icyb.net.ua> <20091222063415.9c2284ea.lehmann@ans-netz.de>

next in thread | previous in thread | raw e-mail | index | archive | help
on 22/12/2009 07:34 Oliver Lehmann said the following:
> Andriy Gapon wrote:
> 
>> You need ichsmb(4) driver for this hardware.
> 
> Ok,
> 
> now I got
> 
> ichsmb0: <Intel 82801JI (ICH10) SMBus controller> port 0x400-0x41f mem 0xfb9fe000-0xfb9fe0ff irq 18 at device 31.3 on pci0
> ichsmb0: [ITHREAD]
> smbus0: <System Management Bus> on ichsmb0
> smb0: <SMBus generic I/O> on smbus0
> 
> Any idea how to get mbmon to work?

No idea, sorry.  Hardware monitoring is a totally different issue.
Do you know what monitoring chip you have got?
Do you know whether it's on SMBus or on LPC or something else (like HECI)?
Etc, etc.  You need to do some research.

> root@kartoffel olivleh1> mbmon 
> No Hardware Monitor found!!
> InitMBInfo: Unknown error: 0
> Exit 1
> root@kartoffel olivleh1> 

BTW, mbmon haven't seen any updates in quite a long while, so it's missing
support for many newer chips.
Unfortunately, state of hardware/sensors monitoring is relatively poor in FreeBSD.

-- 
Andriy Gapon



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4B305C3C.6060703>