Date: Tue, 3 Sep 2002 09:56:56 -0400 (EDT) From: Evan Sarmiento <evms@cs.bu.edu> To: freebsd-mobile@freebsd.org Subject: wi0: watchdog timeout (again) Message-ID: <200209031356.g83DuuY23779@csa.bu.edu>
next in thread | raw e-mail | index | archive | help
Hello,
Whenever I try to use the interface wi0 on my box (which has
Orinoco PCI->PCMCIA adapter with a WaveLan silver card)
I get a 'wi0: watchdog timeout' It configures the AP, channel,
and everything but wont let me ping,etc any outside computer
without receiving the error:
my dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-STABLE #0: Tue Sep 3 08:09:29 GMT 2002
evms@:/usr/obj/usr/src/sys/SEELE
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 266615643 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x634 Stepping = 4
Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX>
real memory = 67108864 (65536K bytes)
config> en pcic1
config> po pcic1 0x3e2
config> ir pcic1 0
config> iom pcic1 0xd4000
config> f pcic1 0
config> q
avail memory = 61517824 (60076K bytes)
Preloaded elf kernel "kernel" at 0xc03c2000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03c209c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443LX (440 LX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip0: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3 on pci0
pci0: <unknown card> (vendor=0x109e, dev=0x036e) at 13.0 irq 10
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 13.1 irq 10
xl0: <3Com 3c900-COMBO Etherlink XL> port 0xfcc0-0xfcff irq 9 at device 14.0 on pci0
xl0: Ethernet address: 00:10:4b:2d:1d:9c
xl0: selecting 10baseT transceiver, half duplex
pcm0: <AudioPCI ES1370> port 0xfc40-0xfc7f irq 7 at device 15.0 on pci0
pcic0: <TI PCI-1410 PCI-CardBus Bridge> at device 16.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: Polling mode
pcic0: TI12XX PCI Config Reg: [pwr save][CSC parallel isa irq]
pccard0: <PC Card bus (classic)> on pcic0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe4000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: 29312MB <Maxtor 33073H3> [59556/16/63] at ata0-master UDMA33
acd0: CDROM <Pioneer CD-ROM ATAPI Model DR-A24X 0106> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
pccard: card inserted, slot 0
wi0 at port 0x240-0x27f irq 5 slot 0 on pccard0
wi0: 802.11 address: 00:60:1d:f1:4d:94
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station 4.32.01
wi0: watchdog timeout
wi0: watchdog timeout
My loader.conf (These parameters needed or else FreeBSD stalls on
boot)
userconfig_script_load="YES"
hw.pcic.intr_path="1"
hw.pcic.irq="0"
Thanks a lot,
Evan
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200209031356.g83DuuY23779>