Date: Mon, 03 Feb 2014 09:48:38 +0100 From: Johan Hendriks <joh.hendriks@gmail.com> To: Patrick <gibblertron@gmail.com> Cc: FreeBSD <freebsd-questions@freebsd.org> Subject: Re: ZFS: Add disk to single disk pool Message-ID: <52EF57E6.6030408@gmail.com> In-Reply-To: <CA%2BdWbmbCx7UJCMQ-8YxBbO_r5_=KU6MbQmmPht4Akh-oXaQs-w@mail.gmail.com> References: <CA%2BdWbmbTxfvEL_e2Up0KzZmav5qRBeKOEOO9u3d7Jh3U8sb=Sg@mail.gmail.com> <CA%2BdWbmbCx7UJCMQ-8YxBbO_r5_=KU6MbQmmPht4Akh-oXaQs-w@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Patrick schreef: > On Sat, Feb 1, 2014 at 1:29 PM, Patrick <gibblertron@gmail.com> wrote: > >> I set up a 9.2 system following the "RootOnZFS" instructions in the wiki. >> I have: >> >> # zpool status >> pool: zroot >> state: ONLINE >> scan: none requested >> config: >> >> NAME STATE READ WRITE CKSUM >> zroot ONLINE 0 0 0 >> gpt/disk0 ONLINE 0 0 0 >> >> I have another disk that I'd like to add to expand the size of the volume, >> but I'm not sure how to do that. >> >> I've prepped the disk with: >> >> gpart create -s gpt ada1 >> gpart add -t freebsd-zfs -l disk1 ada1 >> >> I tried a few different things, but I'm clearly not getting something: >> >> # zpool add zroot /dev/gpt/disk1 >> >> cannot add to 'zroot': root pool can not have multiple vdevs or separate >> logs >> > I found the solution here: http://astralblue.livejournal.com/371755.html > > I just had to set bootfs="" temporarily while I added the new disk, and > then set it back. > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org" You do know that if one of the disks fail, you loose the whole pool?! There is no parity to overcome a disk failure in this setup. regards Johan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52EF57E6.6030408>