Date: Wed, 30 Aug 2017 16:46:49 +1000 From: Paul Koch <paul.koch137@gmail.com> To: Anthony Jenkins <Scoobi_doo@yahoo.com> Cc: freebsd-mobile@freebsd.org Subject: Re: Elantech touch pad not found on ASUS UX430U laptop Message-ID: <20170830164649.5c4cc070@splash.akips.com> In-Reply-To: <fb04d720-d858-32cc-8c13-e21af8243096@yahoo.com> References: <20170826131944.26081005@splash.akips.com> <fb04d720-d858-32cc-8c13-e21af8243096@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> Your Elantech touchpad is probably connected over I2C, and FreeBSD doesn't
> support I2C touchpads.=C2=A0 Support could probably be ported from Linux,=
I just
> don't have the time, hardware or desire to do it.=C2=A0=C2=A0=C2=A0 I thi=
nk the hard part
> would be probing I2C controllers in the system and then probing each one
> for your touchpad.
>=20
> If you'd like to take a stab at adding support, I might be able to hold
> your hand a little.=C2=A0 Having access to Linux kernel logs would at lea=
st make
> it easier to add support for your particular system.
>=20
> Anthony Jenkins
Hi,
I booted Linux and it is a I2C touchpad. But I suppose the first problem is
the I2C controller doesn't seem to be supported by as no driver gets attach=
ed.
...
none2@pci0:0:21:0: class=3D0x118000 card=3D0x17401043 chip=3D0x9d608086
rev=3D0x21 hdr=3D0x00 vendor =3D 'Intel Corporation'
device =3D 'Sunrise Point-LP Serial IO I2C Controller'
class =3D dasp
none3@pci0:0:21:1: class=3D0x118000 card=3D0x17401043 chip=3D0x9d618086
rev=3D0x21 hdr=3D0x00 vendor =3D 'Intel Corporation'
device =3D 'Sunrise Point-LP Serial IO I2C Controller'
class =3D dasp
...
What commands do I need to run on Linux to dump more info ?
I tried the i2cdetect command, but doesn't seem to be useful.
This is from the linux boot messages:
hid-multitouch 0018:04F3:304A.0001: Ignoring the extra HID_DG_INPUTMODE
input: ELAN1200:00 04F3:304A Touchpad as /devices/pci0000:00/0000:00:15.1/i=
2c_designware.1/i2c-9/i2c-ELAN1200:00/0018:04F3:304A.0001/input/input15
hid-multitouch 0018:04F3:304A.0001: input,hidraw0: I2C HID v1.00 Mouse [ELA=
N1200:00 04F3:304A] on i2c-ELAN1200:00
Entire boot messages
[ 0.000000] Linux version 4.10.0-19-generic (buildd@lcy01-13) (gcc versi=
on 6.3.0 20170321 (Ubuntu 6.3.0-10ubuntu1) ) #21-Ubuntu SMP Thu Apr 6 17:04=
:57 UTC 2017 (Ubuntu 4.10.0-19.21-generic 4.10.8)
[ 0.000000] Command line: BOOT_IMAGE=3D/casper/vmlinuz.efi file=3D/cdrom=
/preseed/xubuntu.seed boot=3Dcasper quiet splash ---
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point=
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registe=
rs'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 b=
ytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000848c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000848c6000-0x00000000848c6fff] ACPI =
NVS
[ 0.000000] BIOS-e820: [mem 0x00000000848c7000-0x00000000848c7fff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x00000000848c8000-0x0000000089927fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000089928000-0x000000008a652fff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x000000008a653000-0x000000008a699fff] ACPI =
data
[ 0.000000] BIOS-e820: [mem 0x000000008a69a000-0x000000008aeb0fff] ACPI =
NVS
[ 0.000000] BIOS-e820: [mem 0x000000008aeb1000-0x000000008b2fffff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x000000008b300000-0x000000008b37efff] type =
20
[ 0.000000] BIOS-e820: [mem 0x000000008b37f000-0x000000008b3fefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008b3ff000-0x000000008fffffff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reser=
ved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=3D0x8a661000 ACPI=3D0x8a661000 SMBIOS=3D0x8=
b26f000 SMBIOS 3.0=3D0x8b26e000 MPS=3D0xfca10 ESRT=3D0x886551d8=20
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX430UQ/UX430UQ, BIOS UX430UQ.201=
12/16/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable =3D=3D> rese=
rved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn =3D 0x46f000 max_arch_pfn =3D 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 3 base 008C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 008B800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT=
=20
[ 0.000000] e820: last_pfn =3D 0x8b3ff max_arch_pfn =3D 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcc30-0x000fcc3f] mapped at =
[ffff957e000fcc30]
[ 0.000000] esrt: Reserving ESRT space from 0x00000000886551d8 to 0x0000=
000088655210.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff957e00095000] 95000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x378e28000, 0x378e28fff] PGTABLE
[ 0.000000] BRK [0x378e29000, 0x378e29fff] PGTABLE
[ 0.000000] BRK [0x378e2a000, 0x378e2afff] PGTABLE
[ 0.000000] BRK [0x378e2b000, 0x378e2bfff] PGTABLE
[ 0.000000] BRK [0x378e2c000, 0x378e2cfff] PGTABLE
[ 0.000000] BRK [0x378e2d000, 0x378e2dfff] PGTABLE
[ 0.000000] BRK [0x378e2e000, 0x378e2efff] PGTABLE
[ 0.000000] BRK [0x378e2f000, 0x378e2ffff] PGTABLE
[ 0.000000] BRK [0x378e30000, 0x378e30fff] PGTABLE
[ 0.000000] BRK [0x378e31000, 0x378e31fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3458d000-0x362bdfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000008A661000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x000000008A6610B0 0000E4 (v01 _ASUS_ Notebook 01=
072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000008A68C128 000114 (v06 _ASUS_ Notebook 01=
072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000008A661228 02AEFC (v02 _ASUS_ Notebook 01=
072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000008AE7FC40 000040
[ 0.000000] ACPI: APIC 0x000000008A68C240 000084 (v03 _ASUS_ Notebook 01=
072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000008A68C2C8 000044 (v01 _ASUS_ Notebook 01=
072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x000000008A68C310 0000C1 (v01 _ASUS_ Notebook 01=
072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 0x000000008A68C3D8 00003C (v01 _ASUS_ Notebook 01=
072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000008A68C418 000372 (v01 SataRe SataTabl 00=
001000 INTL 20160422)
[ 0.000000] ACPI: FIDT 0x000000008A68C790 00009C (v01 _ASUS_ Notebook 01=
072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000008A68C830 006008 (v02 DptfTa DptfTabl 00=
001000 INTL 20160422)
[ 0.000000] ACPI: MSDM 0x000000008A692838 000055 (v03 _ASUS_ Notebook 01=
072009 ASUS 00000001)
[ 0.000000] ACPI: SSDT 0x000000008A692890 003159 (v02 SaSsdt SaSsdt 00=
003000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000008A6959F0 000038 (v01 INTEL KBL-ULT 00=
000001 MSFT 0000005F)
[ 0.000000] ACPI: UEFI 0x000000008A695A28 000042 (v01 INTEL EDK2 00=
000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000008A695A70 000EDE (v02 CpuRef CpuSsdt 00=
003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000008A696950 000094 (v01 INTEL KBL-ULT 00=
000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x000000008A6969E8 000028 (v01 INTEL KBL-ULT 00=
000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000008A696A10 00029F (v02 INTEL sensrhub 00=
000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000008A696CB0 000034 (v01 INTEL 00=
000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000008A696CE8 000054 (v00 INTEL 00=
000002 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000008A696D40 00039B (v02 SgRef SgUlt 00=
001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008A6970E0 000829 (v02 SgRef SgPch 00=
001000 INTL 20160422)
[ 0.000000] ACPI: DMAR 0x000000008A697910 0000F0 (v01 INTEL KBL 00=
000001 INTL 00000001)
[ 0.000000] ACPI: TPM2 0x000000008A697A00 000034 (v03 Tpm2Tabl 00=
000001 AMI 00000000)
[ 0.000000] ACPI: BGRT 0x000000008A697A38 000038 (v01 _ASUS_ Notebook 01=
072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000008A697A70 001F0F (v01 OptRef OptTabl 00=
001000 INTL 20160422)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000046effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x46efd5000-0x46effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000046effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000848c5fff]
[ 0.000000] node 0: [mem 0x00000000848c8000-0x0000000089927fff]
[ 0.000000] node 0: [mem 0x000000008b37f000-0x000000008b3fefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000046effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046efff=
fff]
[ 0.000000] On node 0 totalpages: 4163907
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8743 pages used for memmap
[ 0.000000] DMA32 zone: 559526 pages, LIFO batch:31
[ 0.000000] Normal zone: 56256 pages used for memmap
[ 0.000000] Normal zone: 3600384 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000008c000000-0x0000=
00008fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-=
119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x848c6000-0x848c6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x848c7000-0x848c7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x89928000-0x8a652fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a653000-0x8a699fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a69a000-0x8aeb0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8aeb1000-0x8b2fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8b300000-0x8b37efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8b3ff000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0=
xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr=
_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff95826ec00000 s107800 r819=
2 d31464 u524288
[ 0.000000] pcpu-alloc: s107800 r8192 d31464 u524288 alloc=3D1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3=20
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Tota=
l pages: 4098817
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=3D/casper/vmlinuz.efi file=
=3D/cdrom/preseed/xubuntu.seed boot=3Dcasper quiet splash ---
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16175728K/16655628K available (9061K kernel code, 16=
66K rwdata, 3816K rodata, 2228K init, 2364K bss, 479900K reserved, 0K cma-r=
eserved)
[ 0.000000] SLUB: HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D4, N=
odes=3D1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=3D8192 to nr_cpu_ids=3D4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=3D64, nr_cpu_ids=
=3D4
[ 0.000000] NR_IRQS:524544 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, =
max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2900.000 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using tim=
er frequency.. 5808.00 BogoMIPS (lpj=3D11616000)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20160930
[ 0.037250] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.037883] Security Framework initialized
[ 0.037884] Yama: becoming mindful.
[ 0.037895] AppArmor: AppArmor initialized
[ 0.038585] Dentry cache hash table entries: 2097152 (order: 12, 1677721=
6 bytes)
[ 0.041240] Inode-cache hash table entries: 1048576 (order: 11, 8388608 =
bytes)
[ 0.042388] Mount-cache hash table entries: 32768 (order: 6, 262144 byte=
s)
[ 0.042399] Mountpoint-cache hash table entries: 32768 (order: 6, 262144=
bytes)
[ 0.042647] CPU: Physical Processor ID: 0
[ 0.042648] CPU: Processor Core ID: 0
[ 0.042651] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.042652] ENERGY_PERF_BIAS: View and update with x86_energy_perf_polic=
y(8)
[ 0.042657] mce: CPU supports 8 MCE banks
[ 0.042665] CPU0: Thermal monitoring enabled (TM1)
[ 0.042680] process: using mwait in idle threads
[ 0.042682] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.042683] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.043398] Freeing SMP alternatives memory: 32K
[ 0.057845] ftrace: allocating 34175 entries in 134 pages
[ 0.072241] smpboot: Max logical packages: 2
[ 0.072246] DMAR: Host address width 39
[ 0.072247] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.072253] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660=
462 ecap 19e2ff0505e
[ 0.072254] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.072258] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c406604=
62 ecap f050da
[ 0.072259] DMAR: RMRR base: 0x00000089de3000 end: 0x00000089e02fff
[ 0.072259] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[ 0.072262] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.072262] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.072264] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.072264] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.072265] DMAR-IR: Queued invalidation will be enabled to support x2ap=
ic and Intr-remapping.
[ 0.073670] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.073671] x2apic enabled
[ 0.073682] Switched APIC routing to cluster x2apic.
[ 0.077758] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D=
-1
[ 0.117452] TSC deadline timer enabled
[ 0.117460] smpboot: CPU0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz (fam=
ily: 0x6, model: 0x8e, stepping: 0x9)
[ 0.117511] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR,=
full-width counters, Intel PMU driver.
[ 0.117538] ... version: 4
[ 0.117539] ... bit width: 48
[ 0.117539] ... generic registers: 4
[ 0.117539] ... value mask: 0000ffffffffffff
[ 0.117540] ... max period: 00007fffffffffff
[ 0.117540] ... fixed-purpose events: 3
[ 0.117541] ... event mask: 000000070000000f
[ 0.118258] NMI watchdog: enabled on all CPUs, permanently consumes one =
hw-PMU counter.
[ 0.118269] smp: Bringing up secondary CPUs ...
[ 0.118323] x86: Booting SMP configuration:
[ 0.118324] .... node #0, CPUs: #1 #2 #3
[ 0.119846] smp: Brought up 1 node, 4 CPUs
[ 0.119847] smpboot: Total of 4 processors activated (23232.00 BogoMIPS)
[ 0.124149] devtmpfs: initialized
[ 0.124195] x86/mm: Memory block size: 128MB
[ 0.126427] evm: security.selinux
[ 0.126428] evm: security.SMACK64
[ 0.126428] evm: security.SMACK64EXEC
[ 0.126428] evm: security.SMACK64TRANSMUTE
[ 0.126429] evm: security.SMACK64MMAP
[ 0.126429] evm: security.ima
[ 0.126429] evm: security.capability
[ 0.126477] PM: Registering ACPI NVS region [mem 0x848c6000-0x848c6fff] =
(4096 bytes)
[ 0.126478] PM: Registering ACPI NVS region [mem 0x8a69a000-0x8aeb0fff] =
(8482816 bytes)
[ 0.126616] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xfffffff=
f, max_idle_ns: 7645041785100000 ns
[ 0.126623] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.126658] pinctrl core: initialized pinctrl subsystem
[ 0.126813] RTC time: 3:38:45, date: 12/20/16
[ 0.126884] NET: Registered protocol family 16
[ 0.139759] cpuidle: using governor ladder
[ 0.151794] cpuidle: using governor menu
[ 0.151795] PCCT header not found.
[ 0.151828] ACPI FADT declares the system doesn't support PCIe ASPM, so =
disable it
[ 0.151828] ACPI: bus type PCI registered
[ 0.151829] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.151880] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000=
-0xf7ffffff] (base 0xf0000000)
[ 0.151881] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.151889] PCI: Using configuration type 1 for base access
[ 0.167912] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.167912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.168106] ACPI: Added _OSI(Module Device)
[ 0.168106] ACPI: Added _OSI(Processor Device)
[ 0.168107] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.168107] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.168109] ACPI : EC: EC started
[ 0.169801] ACPI: \: Used as first EC
[ 0.169802] ACPI: \: GPE=3D0x50, EC_CMD/EC_SC=3D0x66, EC_DATA=3D0x62
[ 0.169803] ACPI: \: Used as boot ECDT EC to handle transactions
[ 0.171223] ACPI: Executed 33 blocks of module-level executable AML code
[ 0.181297] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.187221] ACPI: Dynamic OEM Table Load:
[ 0.187227] ACPI: SSDT 0xFFFF95825C325800 0006F6 (v02 PmRef Cpu0Ist 00=
003000 INTL 20160422)
[ 0.187382] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.187451] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.188704] ACPI: Dynamic OEM Table Load:
[ 0.188709] ACPI: SSDT 0xFFFF95825BD83400 0003FF (v02 PmRef Cpu0Cst 00=
003001 INTL 20160422)
[ 0.188846] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.188991] ACPI: Dynamic OEM Table Load:
[ 0.188995] ACPI: SSDT 0xFFFF95825BE1E600 000115 (v02 PmRef Cpu0Hwp 00=
003000 INTL 20160422)
[ 0.189112] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.189176] ACPI: Dynamic OEM Table Load:
[ 0.189179] ACPI: SSDT 0xFFFF95825BE1F400 0001A4 (v02 PmRef HwpLvt 00=
003000 INTL 20160422)
[ 0.189293] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.189606] ACPI: Dynamic OEM Table Load:
[ 0.189611] ACPI: SSDT 0xFFFF95825C327000 00065C (v02 PmRef ApIst 00=
003000 INTL 20160422)
[ 0.189926] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.190057] ACPI: Dynamic OEM Table Load:
[ 0.190061] ACPI: SSDT 0xFFFF95825BE1FE00 000197 (v02 PmRef ApHwp 00=
003000 INTL 20160422)
[ 0.190197] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.190339] ACPI: Dynamic OEM Table Load:
[ 0.190342] ACPI: SSDT 0xFFFF95825BE1F000 00018A (v02 PmRef ApCst 00=
003000 INTL 20160422)
[ 0.190477] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.192079] ACPI : EC: EC stopped
[ 0.192080] ACPI : EC: EC started
[ 0.192222] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.192223] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=3D0x50, EC_CMD/EC_SC=3D0x66,=
EC_DATA=3D0x62
[ 0.192224] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle t=
ransactions
[ 0.192224] ACPI: Interpreter enabled
[ 0.192265] ACPI: (supports S0 S3 S4 S5)
[ 0.192265] ACPI: Using IOAPIC for interrupt routing
[ 0.192298] PCI: Using host bridge windows from ACPI; if necessary, use =
"pci=3Dnocrs" and report a bug
[ 0.196442] ACPI: Power Resource [WRST] (on)
[ 0.196583] ACPI: Power Resource [WRST] (on)
[ 0.196721] ACPI: Power Resource [WRST] (on)
[ 0.196861] ACPI: Power Resource [WRST] (on)
[ 0.196998] ACPI: Power Resource [WRST] (on)
[ 0.197042] ACPI: Power Resource [PC09] (on)
[ 0.197927] ACPI: Power Resource [WRST] (on)
[ 0.198067] ACPI: Power Resource [WRST] (on)
[ 0.198207] ACPI: Power Resource [WRST] (on)
[ 0.198344] ACPI: Power Resource [WRST] (on)
[ 0.198983] ACPI: Power Resource [WRST] (on)
[ 0.199122] ACPI: Power Resource [WRST] (on)
[ 0.199259] ACPI: Power Resource [WRST] (on)
[ 0.199397] ACPI: Power Resource [WRST] (on)
[ 0.199536] ACPI: Power Resource [WRST] (on)
[ 0.199674] ACPI: Power Resource [WRST] (on)
[ 0.199816] ACPI: Power Resource [WRST] (on)
[ 0.200160] ACPI: Power Resource [WRST] (on)
[ 0.200300] ACPI: Power Resource [WRST] (on)
[ 0.200437] ACPI: Power Resource [WRST] (on)
[ 0.208859] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.208863] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM Cloc=
kPM Segments MSI]
[ 0.210330] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER =
PCIeCapability]
[ 0.210330] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using B=
IOS configuration
[ 0.211001] PCI host bridge to bus 0000:00
[ 0.211003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.211004] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.211005] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bfff=
f window]
[ 0.211006] pci_bus 0000:00: root bus resource [mem 0x90000000-0xeffffff=
f window]
[ 0.211007] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7ffff=
f window]
[ 0.211008] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.211015] pci 0000:00:00.0: [8086:5904] type 00 class 0x060000
[ 0.211337] pci 0000:00:02.0: [8086:5916] type 00 class 0x030000
[ 0.211346] pci 0000:00:02.0: reg 0x10: [mem 0xed000000-0xedffffff 64bit]
[ 0.211352] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit=
pref]
[ 0.211356] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.211488] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[ 0.211498] pci 0000:00:04.0: reg 0x10: [mem 0xef220000-0xef227fff 64bit]
[ 0.211700] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[ 0.211719] pci 0000:00:14.0: reg 0x10: [mem 0xef210000-0xef21ffff 64bit]
[ 0.211792] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.211955] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.211989] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[ 0.212008] pci 0000:00:14.2: reg 0x10: [mem 0xef238000-0xef238fff 64bit]
[ 0.212261] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[ 0.212469] pci 0000:00:15.0: reg 0x10: [mem 0xef237000-0xef237fff 64bit]
[ 0.213428] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[ 0.213636] pci 0000:00:15.1: reg 0x10: [mem 0xef236000-0xef236fff 64bit]
[ 0.214534] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[ 0.214556] pci 0000:00:16.0: reg 0x10: [mem 0xef235000-0xef235fff 64bit]
[ 0.214633] pci 0000:00:16.0: PME# supported from D3hot
[ 0.214780] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[ 0.214795] pci 0000:00:17.0: reg 0x10: [mem 0xef230000-0xef231fff]
[ 0.214803] pci 0000:00:17.0: reg 0x14: [mem 0xef234000-0xef2340ff]
[ 0.214810] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.214818] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.214826] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.214833] pci 0000:00:17.0: reg 0x24: [mem 0xef233000-0xef2337ff]
[ 0.214877] pci 0000:00:17.0: PME# supported from D3hot
[ 0.215015] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[ 0.215082] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.215204] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.215249] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400
[ 0.215322] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.215445] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.215489] pci 0000:00:1f.0: [8086:9d58] type 00 class 0x060100
[ 0.215718] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[ 0.215728] pci 0000:00:1f.2: reg 0x10: [mem 0xef22c000-0xef22ffff]
[ 0.215897] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300
[ 0.215919] pci 0000:00:1f.3: reg 0x10: [mem 0xef228000-0xef22bfff 64bit]
[ 0.215945] pci 0000:00:1f.3: reg 0x20: [mem 0xef200000-0xef20ffff 64bit]
[ 0.215994] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.216158] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.216191] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[ 0.216239] pci 0000:00:1f.4: reg 0x10: [mem 0xef232000-0xef2320ff 64bit]
[ 0.216310] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.216554] pci 0000:01:00.0: [10de:134d] type 00 class 0x030200
[ 0.216568] pci 0000:01:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
[ 0.216581] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit=
pref]
[ 0.216593] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit=
pref]
[ 0.216601] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.216610] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef07ffff pref]
[ 0.216736] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.231866] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.231868] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.231871] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xef0fffff]
[ 0.231875] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xe1ffffff=
64bit pref]
[ 0.232232] pci 0000:02:00.0: [8086:24f3] type 00 class 0x028000
[ 0.232311] pci 0000:02:00.0: reg 0x10: [mem 0xef100000-0xef101fff 64bit]
[ 0.232808] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.233004] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.248453] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.248457] pci 0000:00:1c.5: bridge window [mem 0xef100000-0xef1fffff]
[ 0.250614] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 1=
5)
[ 0.250657] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 1=
5)
[ 0.250697] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 1=
5)
[ 0.250737] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 1=
5)
[ 0.250777] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 1=
5)
[ 0.250817] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 1=
5)
[ 0.250858] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 1=
5)
[ 0.250898] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 1=
5)
[ 0.251338] ACPI: Enabled 4 GPEs in block 00 to 7F
[ 0.251418] ACPI : EC: event unblocked
[ 0.251431] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=3D0x50, EC_CMD/EC_SC=3D0x66,=
EC_DATA=3D0x62
[ 0.251432] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle t=
ransactions and events
[ 0.251655] SCSI subsystem initialized
[ 0.251683] libata version 3.00 loaded.
[ 0.251710] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.251711] pci 0000:00:02.0: vgaarb: VGA device added: decodes=3Dio+mem=
,owns=3Dio+mem,locks=3Dnone
[ 0.251714] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.251714] vgaarb: loaded
[ 0.251727] ACPI: bus type USB registered
[ 0.251739] usbcore: registered new interface driver usbfs
[ 0.251744] usbcore: registered new interface driver hub
[ 0.251755] usbcore: registered new device driver usb
[ 0.251803] Registered efivars operations
[ 0.272462] PCI: Using ACPI for IRQ routing
[ 0.286689] PCI: pci_cache_line_size set to 64 bytes
[ 0.287346] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.287347] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.287348] e820: reserve RAM buffer [mem 0x848c6000-0x87ffffff]
[ 0.287348] e820: reserve RAM buffer [mem 0x89928000-0x8bffffff]
[ 0.287349] e820: reserve RAM buffer [mem 0x8b3ff000-0x8bffffff]
[ 0.287350] e820: reserve RAM buffer [mem 0x46f000000-0x46fffffff]
[ 0.287419] NetLabel: Initializing
[ 0.287420] NetLabel: domain hash size =3D 128
[ 0.287420] NetLabel: protocols =3D UNLABELED CIPSOv4 CALIPSO
[ 0.287432] NetLabel: unlabeled traffic allowed by default
[ 0.287531] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.287535] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.289580] clocksource: Switched to clocksource hpet
[ 0.295586] VFS: Disk quotas dquot_6.6.0
[ 0.295597] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 byte=
s)
[ 0.295675] AppArmor: AppArmor Filesystem Enabled
[ 0.295703] pnp: PnP ACPI init
[ 0.295925] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.295926] system 00:00: [io 0xffff] has been reserved
[ 0.295927] system 00:00: [io 0xffff] has been reserved
[ 0.295928] system 00:00: [io 0xffff] has been reserved
[ 0.295929] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.295930] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.295932] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296025] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.296062] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.296063] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02=
(active)
[ 0.296202] pnp 00:03: Plug and Play ACPI device, IDs ATK3001 PNP030b (a=
ctive)
[ 0.296403] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.296404] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.296405] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.296406] system 00:04: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.296407] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.296408] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reser=
ved
[ 0.296409] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.296410] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.296411] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reser=
ved
[ 0.296412] system 00:04: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.296413] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296445] system 00:05: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.296446] system 00:05: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.296447] system 00:05: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.296448] system 00:05: [mem 0xfe000000-0xfe01ffff] could not be reser=
ved
[ 0.296448] system 00:05: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.296449] system 00:05: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.296450] system 00:05: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.296452] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.296735] system 00:06: [io 0xff00-0xfffe] has been reserved
[ 0.296736] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.297827] system 00:07: [mem 0xfe029000-0xfe029fff] has been reserved
[ 0.297828] system 00:07: [mem 0xfe028000-0xfe028fff] has been reserved
[ 0.297829] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.297830] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.297831] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.297832] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.298813] pnp: PnP ACPI: found 8 devices
[ 0.305545] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, m=
ax_idle_ns: 2085701024 ns
[ 0.305565] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.305567] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.305570] pci 0000:00:1c.0: bridge window [mem 0xee000000-0xef0fffff]
[ 0.305572] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xe1ffffff=
64bit pref]
[ 0.305577] pci 0000:00:1c.5: PCI bridge to [bus 02]
[ 0.305601] pci 0000:00:1c.5: bridge window [mem 0xef100000-0xef1fffff]
[ 0.305608] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.305609] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.305610] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff windo=
w]
[ 0.305610] pci_bus 0000:00: resource 7 [mem 0x90000000-0xefffffff windo=
w]
[ 0.305611] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff windo=
w]
[ 0.305612] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.305613] pci_bus 0000:01: resource 1 [mem 0xee000000-0xef0fffff]
[ 0.305614] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xe1ffffff 64bit=
pref]
[ 0.305615] pci_bus 0000:02: resource 1 [mem 0xef100000-0xef1fffff]
[ 0.305742] NET: Registered protocol family 2
[ 0.305884] TCP established hash table entries: 131072 (order: 8, 104857=
6 bytes)
[ 0.306041] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.306153] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.306174] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.306211] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.306262] NET: Registered protocol family 1
[ 0.306272] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x0=
00c0000-0x000dffff]
[ 0.306841] PCI: CLS 64 bytes, default 64
[ 0.306876] Unpacking initramfs...
[ 5.625091] Freeing initrd memory: 29892K
[ 5.625117] DMAR: ACPI device "device:70" under DMAR at fed91000 as 00:1=
5.0
[ 5.625120] DMAR: ACPI device "device:71" under DMAR at fed91000 as 00:1=
5.1
[ 5.625131] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 5.625133] software IO TLB [mem 0x7f60e000-0x8360e000] (64MB) mapped at=
[ffff957e7f60e000-ffff957e8360dfff]
[ 5.625162] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29d=
c05e54fc, max_idle_ns: 440795291716 ns
[ 5.625269] Scanning for low memory corruption every 60 seconds
[ 5.625545] audit: initializing netlink subsys (disabled)
[ 5.625623] audit: type=3D2000 audit(1482205130.612:1): initialized
[ 5.625929] Initialise system trusted keyrings
[ 5.626015] workingset: timestamp_bits=3D36 max_order=3D22 bucket_order=
=3D0
[ 5.627125] zbud: loaded
[ 5.627511] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.627669] fuse init (API version 7.26)
[ 5.629350] Key type asymmetric registered
[ 5.629351] Asymmetric key parser 'x509' registered
[ 5.629384] Block layer SCSI generic (bsg) driver version 0.4 loaded (ma=
jor 248)
[ 5.629422] io scheduler noop registered
[ 5.629422] io scheduler deadline registered
[ 5.629428] io scheduler cfq registered (default)
[ 5.629991] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[ 5.630015] pcieport 0000:00:1c.5: AER enabled with IRQ 123
[ 5.630025] pcieport 0000:00:1c.0: Signaling PME with IRQ 122
[ 5.630034] pcieport 0000:00:1c.5: Signaling PME with IRQ 123
[ 5.630067] efifb: probing for efifb
[ 5.630076] efifb: framebuffer at 0xc0000000, using 1920k, total 1920k
[ 5.630077] efifb: mode is 800x600x32, linelength=3D3200, pages=3D1
[ 5.630077] efifb: scrolling: redraw
[ 5.630078] efifb: Truecolor: size=3D8:8:8:8, shift=3D24:16:8:0
[ 5.630965] Console: switching to colour frame buffer device 100x37
[ 5.631749] fb0: EFI VGA frame buffer device
[ 5.631754] intel_idle: MWAIT substates: 0x11142120
[ 5.631755] intel_idle: v0.4.1 model 0x8E
[ 5.631942] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 5.632013] ACPI: AC Adapter [AC0] (off-line)
[ 5.633094] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A0=
8:00/device:1b/PNP0C09:01/PNP0C0D:00/input/input0
[ 5.634105] ACPI: Lid Switch [LID]
[ 5.634142] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0=
C0E:00/input/input1
[ 5.634144] ACPI: Sleep Button [SLPB]
[ 5.634169] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0=
C0C:00/input/input2
[ 5.634170] ACPI: Power Button [PWRB]
[ 5.634194] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/inpu=
t/input3
[ 5.634195] ACPI: Power Button [PWRF]
[ 5.634981] (NULL device *): hwmon_device_register() is deprecated. Plea=
se convert the driver to use hwmon_device_register_with_info().
[ 5.635050] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.635050] ACPI: Thermal Zone [THRM] (49 C)
[ 5.635077] GHES: HEST is not enabled!
[ 5.635139] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 5.637647] Linux agpgart interface v0.103
[ 5.642262] ACPI: Battery Slot [BAT0] (battery present)
[ 5.643591] loop: module loaded
[ 5.643711] libphy: Fixed MDIO Bus: probed
[ 5.643712] tun: Universal TUN/TAP device driver, 1.6
[ 5.643712] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 5.643740] PPP generic driver version 2.4.2
[ 5.643775] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.643776] ehci-pci: EHCI PCI platform driver
[ 5.643783] ehci-platform: EHCI generic platform driver
[ 5.643789] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.643790] ohci-pci: OHCI PCI platform driver
[ 5.643796] ohci-platform: OHCI generic platform driver
[ 5.643800] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.643920] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.643925] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus =
number 1
[ 5.645010] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x1=
00 quirks 0x00109810
[ 5.645016] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 5.645094] usb usb1: New USB device found, idVendor=3D1d6b, idProduct=
=3D0002
[ 5.645095] usb usb1: New USB device strings: Mfr=3D3, Product=3D2, Seri=
alNumber=3D1
[ 5.645096] usb usb1: Product: xHCI Host Controller
[ 5.645097] usb usb1: Manufacturer: Linux 4.10.0-19-generic xhci-hcd
[ 5.645098] usb usb1: SerialNumber: 0000:00:14.0
[ 5.645181] hub 1-0:1.0: USB hub found
[ 5.645195] hub 1-0:1.0: 12 ports detected
[ 5.652674] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 5.652676] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus =
number 2
[ 5.652698] usb usb2: New USB device found, idVendor=3D1d6b, idProduct=
=3D0003
[ 5.652699] usb usb2: New USB device strings: Mfr=3D3, Product=3D2, Seri=
alNumber=3D1
[ 5.652700] usb usb2: Product: xHCI Host Controller
[ 5.652701] usb usb2: Manufacturer: Linux 4.10.0-19-generic xhci-hcd
[ 5.652701] usb usb2: SerialNumber: 0000:00:14.0
[ 5.652779] hub 2-0:1.0: USB hub found
[ 5.652788] hub 2-0:1.0: 6 ports detected
[ 5.656667] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 5.656667] i8042: PNP: PS/2 appears to have AUX port disabled, if this =
is incorrect please boot with i8042.nopnp
[ 5.658202] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.658283] mousedev: PS/2 mouse device common for all mice
[ 5.658440] rtc_cmos 00:01: RTC can wake from S4
[ 5.658817] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 5.658900] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram=
, hpet irqs
[ 5.658905] i2c /dev entries driver
[ 5.658944] device-mapper: uevent: version 1.0.3
[ 5.658994] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised:=
dm-devel@redhat.com
[ 5.658996] intel_pstate: Intel P-state driver initializing
[ 5.659424] intel_pstate: HWP enabled
[ 5.659510] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.659511] EFI Variables Facility v0.08 2004-May-17
[ 5.682622] intel_pmc_core 0000:00:1f.2: enabling device (0000 -> 0002)
[ 5.682743] NET: Registered protocol family 10
[ 5.684784] Segment Routing with IPv6
[ 5.684795] NET: Registered protocol family 17
[ 5.684803] Key type dns_resolver registered
[ 5.685041] microcode: sig=3D0x806e9, pf=3D0x80, revision=3D0x42
[ 5.685078] microcode: Microcode Update Driver: v2.2.
[ 5.685173] registered taskstats version 1
[ 5.685180] Loading compiled-in X.509 certificates
[ 5.686542] Loaded X.509 cert 'Build time autogenerated kernel key: 8e99=
ee5b0fead84880b7849b477f2b92957907bc'
[ 5.686552] zswap: loaded using pool lzo/zbud
[ 5.694112] Key type big_key registered
[ 5.694114] Key type trusted registered
[ 5.695076] Key type encrypted registered
[ 5.695077] AppArmor: AppArmor sha1 policy hashing enabled
[ 5.695079] ima: No TPM chip found, activating TPM-bypass! (rc=3D-19)
[ 5.695088] evm: HMAC attrs: 0x1
[ 5.696134] Magic number: 12:436:614
[ 5.696325] rtc_cmos 00:01: setting system clock to 2016-12-20 03:38:50 =
UTC (1482205130)
[ 5.696371] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.696372] EDD information not available.
[ 5.696405] PM: Hibernation image not present or could not be loaded.
[ 5.697391] Freeing unused kernel memory: 2228K
[ 5.697392] Write protecting the kernel read-only data: 14336k
[ 5.697608] Freeing unused kernel memory: 1164K
[ 5.697942] Freeing unused kernel memory: 280K
[ 5.702397] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 5.705245] input: AT Translated Set 2 keyboard as /devices/platform/i80=
42/serio0/input/input4
[ 5.709788] random: systemd-udevd: uninitialized urandom read (16 bytes =
read)
[ 5.709831] random: systemd-udevd: uninitialized urandom read (16 bytes =
read)
[ 5.709836] random: systemd-udevd: uninitialized urandom read (16 bytes =
read)
[ 5.709841] random: systemd-udevd: uninitialized urandom read (16 bytes =
read)
[ 5.710143] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.710159] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.710881] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.710889] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.711053] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.711079] random: udevadm: uninitialized urandom read (16 bytes read)
[ 5.727684] FUJITSU Extended Socket Network Device Driver - version 1.2 =
- Copyright (c) 2015 FUJITSU LIMITED
[ 5.734609] wmi: Mapper loaded
[ 5.744775] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.751350] ahci 0000:00:17.0: version 3.0
[ 5.751569] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x=
4 impl SATA mode
[ 5.751571] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum=
part deso sadm sds apst=20
[ 5.752612] [drm] Initialized
[ 5.755177] scsi host0: ahci
[ 5.758625] scsi host1: ahci
[ 5.762907] scsi host2: ahci
[ 5.762961] ata1: DUMMY
[ 5.762961] ata2: DUMMY
[ 5.762966] ata3: SATA max UDMA/133 abar m2048@0xef233000 port 0xef23320=
0 irq 125
[ 5.779556] [drm] Memory usable by graphics device =3D 4096M
[ 5.779558] checking generic (c0000000 1e0000) vs hw (c0000000 10000000)
[ 5.779558] fb: switching to inteldrmfb from EFI VGA
[ 5.779574] Console: switching to colour dummy device 80x25
[ 5.781656] [drm] Replacing VGA console driver
[ 5.782108] MXM: GUID detected in BIOS
[ 5.782254] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch=
- Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.782299] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mis=
match - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.782344] ACPI Warning: \_SB.PCI0.RP01.PEGP._DSM: Argument #4 type mis=
match - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[ 5.782510] pci 0000:01:00.0: optimus capabilities: enabled, status dyna=
mic power, hda bios codec supported
[ 5.782513] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP01.=
PEGP handle
[ 5.782513] nouveau: detected PR support, will not use DSM
[ 5.782535] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 5.782705] nouveau 0000:01:00.0: NVIDIA GM108 (1180d0a2)
[ 5.788942] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.788942] [drm] Driver supports precise vblank timestamp query.
[ 5.796145] nouveau 0000:01:00.0: bios: version 82.08.64.00.12
[ 5.798298] [drm] Finished loading i915/kbl_dmc_ver1_01.bin (v1.1)
[ 5.798685] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=
=3Dio+mem,decodes=3Dio+mem:owns=3Dio+mem
[ 5.805054] [drm] GuC firmware load skipped
[ 5.883009] nouveau 0000:01:00.0: priv: HUB0: 6013d4 badf573f (1b408200)
[ 5.883061] nouveau 0000:01:00.0: fb: 2048 MiB DDR3
[ 5.883214] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 60=
13d4 [ IBUS ]
[ 5.883410] nouveau 0000:01:00.0: priv: HUB0: 10ecc0 ffffffff (1840822c)
[ 5.981647] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 6.076863] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.078088] ata3.00: ATA-9: SanDisk SD8SN8U512G1002, X4131002, max UDMA/=
133
[ 6.078089] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32=
), AA
[ 6.079848] ata3.00: configured for UDMA/133
[ 6.080213] scsi 2:0:0:0: Direct-Access ATA SanDisk SD8SN8U5 10=
02 PQ: 0 ANSI: 5
[ 6.162446] usb 1-2: New USB device found, idVendor=3D0781, idProduct=3D=
5583
[ 6.162447] usb 1-2: New USB device strings: Mfr=3D1, Product=3D2, Seria=
lNumber=3D3
[ 6.162448] usb 1-2: Product: Ultra Fit
[ 6.162449] usb 1-2: Manufacturer: SanDisk
[ 6.162449] usb 1-2: SerialNumber: 4C531001390412122404
[ 6.164584] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 6.164776] scsi host3: usb-storage 1-2:1.0
[ 6.164832] usbcore: registered new interface driver usb-storage
[ 6.165700] usbcore: registered new interface driver uas
[ 6.165739] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 6.165946] sd 2:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 G=
B/477 GiB)
[ 6.165963] sd 2:0:0:0: [sda] Write Protect is off
[ 6.165963] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.166006] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,=
doesn't support DPO or FUA
[ 6.168004] sda: sda1 sda2 sda3 sda4
[ 6.168501] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.281922] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 6.308416] usb 2-1: New USB device found, idVendor=3D2001, idProduct=3D=
4a00
[ 6.308417] usb 2-1: New USB device strings: Mfr=3D1, Product=3D2, Seria=
lNumber=3D3
[ 6.308417] usb 2-1: Product: D-Link DUB-1312
[ 6.308418] usb 2-1: Manufacturer: D-Link Elec. Corp.
[ 6.308419] usb 2-1: SerialNumber: 0000000000161B
[ 6.421604] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[ 6.595764] usb 1-6: New USB device found, idVendor=3D0bda, idProduct=3D=
58e4
[ 6.595766] usb 1-6: New USB device strings: Mfr=3D3, Product=3D1, Seria=
lNumber=3D2
[ 6.595767] usb 1-6: Product: USB2.0 HD UVC WebCam
[ 6.595768] usb 1-6: Manufacturer: 04081-0009800017121008915
[ 6.595768] usb 1-6: SerialNumber: 200901010001
[ 6.637627] clocksource: Switched to clocksource tsc
[ 6.717586] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[ 6.825894] [drm] RC6 on
[ 6.858412] usb 1-8: New USB device found, idVendor=3D8087, idProduct=3D=
0a2b
[ 6.858412] usb 1-8: New USB device strings: Mfr=3D0, Product=3D0, Seria=
lNumber=3D0
[ 7.165764] vga_switcheroo: enabled
[ 7.165888] [TTM] Zone kernel: Available graphics memory: 8154720 kiB
[ 7.165889] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 7.165889] [TTM] Initializing pool allocator
[ 7.165892] [TTM] Initializing DMA pool allocator
[ 7.165906] nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
[ 7.165907] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 7.165909] nouveau 0000:01:00.0: DRM: Pointer to TMDS table invalid
[ 7.165910] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 7.165911] nouveau 0000:01:00.0: DRM: Pointer to flat panel table inval=
id
[ 7.177815] random: fast init done
[ 7.178375] scsi 3:0:0:0: Direct-Access SanDisk Ultra Fit 1.=
00 PQ: 0 ANSI: 6
[ 7.244964] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 7.245559] sd 3:0:0:0: [sdb] 30031250 512-byte logical blocks: (15.4 GB=
/14.3 GiB)
[ 7.246874] sd 3:0:0:0: [sdb] Write Protect is off
[ 7.246875] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 7.247265] sd 3:0:0:0: [sdb] Write cache: disabled, read cache: enabled=
, doesn't support DPO or FUA
[ 7.252024] sdb: sdb1 sdb2
[ 7.253531] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 7.264627] nouveau 0000:01:00.0: hwmon_device_register() is deprecated.=
Please convert the driver to use hwmon_device_register_with_info().
[ 7.366437] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
[ 7.366446] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on=
minor 1
[ 7.368321] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: n=
o)
[ 7.368558] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08=
:00/LNXVIDEO:00/input/input5
[ 7.368628] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: n=
o)
[ 7.368650] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08=
:00/device:26/LNXVIDEO:01/input/input6
[ 7.368704] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on mi=
nor 0
[ 7.563509] fbcon: inteldrmfb (fb0) is primary device
[ 8.840856] Console: switching to colour frame buffer device 240x67
[ 8.860057] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.504238] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9.506368] ISO 9660 Extensions: RRIP_1991A
[ 9.515014] aufs 4.x-rcN-20170206
[ 11.163122] random: crng init done
[ 13.399764] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.451477] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT=
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNU=
TLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 13.451558] systemd[1]: Detected architecture x86-64.
[ 13.451689] systemd[1]: Set hostname to <xubuntu>.
[ 13.451789] systemd[1]: Initializing machine ID from random generator.
[ 13.534296] systemd[1]: Listening on Journal Socket.
[ 13.534369] systemd[1]: Listening on Journal Audit Socket.
[ 13.534390] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 13.534406] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 13.534412] systemd[1]: Reached target Swap.
[ 13.534437] systemd[1]: Started Forward Password Requests to Wall Direct=
ory Watch.
[ 13.691571] systemd-journald[1024]: Received request to flush runtime jo=
urnal from PID 1
[ 13.724117] lp: driver loaded but no devices found
[ 13.736970] ppdev: user-space parallel port driver
[ 13.868260] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.883739] (NULL device *): hwmon_device_register() is deprecated. Plea=
se convert the driver to use hwmon_device_register_with_info().
[ 13.884657] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 13.885332] tpm_crb MSFT0101:00: can't request region for resource [mem =
0xfed40080-0xfed40fff]
[ 13.885380] tpm_crb: probe of MSFT0101:00 failed with error -16
[ 13.943867] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/L=
NXSYBUS:00/ATK4002:00/input/input7
[ 13.966514] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 13.966995] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 13.967199] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 13.967437] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 13.968262] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 14.001645] Bluetooth: Core ver 2.22
[ 14.001659] NET: Registered protocol family 31
[ 14.001660] Bluetooth: HCI device and connection manager initialized
[ 14.001662] Bluetooth: HCI socket layer initialized
[ 14.001663] Bluetooth: L2CAP socket layer initialized
[ 14.001666] Bluetooth: SCO socket layer initialized
[ 14.065427] Bluetooth: HCI UART driver ver 2.3
[ 14.065428] Bluetooth: HCI UART protocol H4 registered
[ 14.065429] Bluetooth: HCI UART protocol BCSP registered
[ 14.065429] Bluetooth: HCI UART protocol LL registered
[ 14.065430] Bluetooth: HCI UART protocol ATH3K registered
[ 14.065430] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.065456] Bluetooth: HCI UART protocol Intel registered
[ 14.065468] Bluetooth: HCI UART protocol Broadcom registered
[ 14.065468] Bluetooth: HCI UART protocol QCA registered
[ 14.065469] Bluetooth: HCI UART protocol AG6XX registered
[ 14.065469] Bluetooth: HCI UART protocol Marvell registered
[ 14.075383] usbcore: registered new interface driver btusb
[ 14.076161] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014
[ 14.083166] Bluetooth: hci0: Device revision is 5
[ 14.083167] Bluetooth: hci0: Secure boot is enabled
[ 14.083167] Bluetooth: hci0: OTP lock is enabled
[ 14.083168] Bluetooth: hci0: API lock is enabled
[ 14.083168] Bluetooth: hci0: Debug lock is disabled
[ 14.083169] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 14.215028] media: Linux media interface: v0.10
[ 14.292717] Intel(R) Wireless WiFi driver for Linux
[ 14.292717] Copyright(c) 2003- 2015 Intel Corporation
[ 14.293028] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 14.295617] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C=
-26.ucode failed with error -2
[ 14.295640] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C=
-25.ucode failed with error -2
[ 14.295661] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C=
-24.ucode failed with error -2
[ 14.295681] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-8000C=
-23.ucode failed with error -2
[ 14.334346] Linux video capture interface: v2.00
[ 14.365932] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 14.366078] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_aud=
io_component_bind_ops [i915])
[ 14.410789] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi
[ 14.414162] AVX2 version of gcm_enc/dec engaged.
[ 14.414162] AES CTR mode by8 optimization enabled
[ 14.436747] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (0bda:5=
8e4)
[ 14.440987] uvcvideo 1-6:1.0: Entity type for entity Realtek Extended Co=
ntrols Unit was not initialized!
[ 14.440989] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not=
initialized!
[ 14.440990] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was no=
t initialized!
[ 14.440991] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not in=
itialized!
[ 14.441567] input: USB2.0 HD UVC WebCam as /devices/pci0000:00/0000:00:1=
4.0/usb1/1-6/1-6:1.0/input/input8
[ 14.442073] usbcore: registered new interface driver uvcvideo
[ 14.442073] USB Video Class driver (1.1.1)
[ 14.618306] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: li=
ne_outs=3D1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 14.618307] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=3D0 (0x0/=
0x0/0x0/0x0/0x0)
[ 14.618308] snd_hda_codec_realtek hdaudioC0D0: hp_outs=3D1 (0x21/0x0/=
0x0/0x0/0x0)
[ 14.618309] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=3D0x0
[ 14.618309] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.618310] snd_hda_codec_realtek hdaudioC0D0: Mic=3D0x12
[ 14.641188] ax88179_178a 2-1:1.0 eth0: register 'ax88179_178a' at usb-00=
00:00:14.0-1, D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter, ec:22:80=
:a3:3c:93
[ 14.641947] usbcore: registered new interface driver ax88179_178a
[ 14.753930] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:0=
0:1f.3/sound/card0/input9
[ 14.753964] input: HDA Intel PCH HDMI/DP,pcm=3D3 as /devices/pci0000:00/=
0000:00:1f.3/sound/card0/input10
[ 14.753992] input: HDA Intel PCH HDMI/DP,pcm=3D7 as /devices/pci0000:00/=
0000:00:1f.3/sound/card0/input11
[ 14.754020] input: HDA Intel PCH HDMI/DP,pcm=3D8 as /devices/pci0000:00/=
0000:00:1f.3/sound/card0/input12
[ 14.801268] iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op=
_mode iwlmvm
[ 15.005269] asus_wmi: ASUS WMI generic driver loaded
[ 15.006663] asus_wmi: Initialization: 0x1
[ 15.006683] asus_wmi: BIOS WMI version: 9.0
[ 15.006702] asus_wmi: SFUN value: 0x2021
[ 15.007155] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/inp=
ut/input13
[ 15.007221] asus_wmi: Number of fans: 0
[ 15.221254] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless A=
C 8260, REV=3D0x208
[ 15.223741] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 15.224714] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 15.231402] intel_rapl: Found RAPL domain package
[ 15.231403] intel_rapl: Found RAPL domain core
[ 15.231404] intel_rapl: Found RAPL domain uncore
[ 15.231404] intel_rapl: Found RAPL domain dram
[ 15.286660] ax88179_178a 2-1:1.0 enxec2280a33c93: renamed from eth0
[ 15.362374] hid-multitouch 0018:04F3:304A.0001: Ignoring the extra HID_D=
G_INPUTMODE
[ 15.362416] input: ELAN1200:00 04F3:304A Touchpad as /devices/pci0000:00=
/0000:00:15.1/i2c_designware.1/i2c-9/i2c-ELAN1200:00/0018:04F3:304A.0001/in=
put/input15
[ 15.362525] hid-multitouch 0018:04F3:304A.0001: input,hidraw0: I2C HID v=
1.00 Mouse [ELAN1200:00 04F3:304A] on i2c-ELAN1200:00
[ 15.377296] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 15.377513] (NULL device *): hwmon_device_register() is deprecated. Plea=
se convert the driver to use hwmon_device_register_with_info().
[ 15.377528] thermal thermal_zone6: failed to read out thermal zone (-5)
[ 15.414677] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 15.538765] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.538766] Bluetooth: BNEP filters: protocol multicast
[ 15.538769] Bluetooth: BNEP socket layer initialized
[ 15.778267] Bluetooth: hci0: Waiting for firmware download to complete
[ 15.779139] Bluetooth: hci0: Firmware loaded in 1663827 usecs
[ 15.779158] Bluetooth: hci0: Waiting for device to boot
[ 15.790198] Bluetooth: hci0: Device booted in 10764 usecs
[ 15.818984] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-11-5.=
ddc
[ 15.823144] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 15.890879] IPv6: ADDRCONF(NETDEV_UP): enxec2280a33c93: link is not ready
[ 16.217086] IPv6: ADDRCONF(NETDEV_UP): enxec2280a33c93: link is not ready
[ 16.219509] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.221733] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 16.222133] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 16.350193] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 16.350547] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 16.443522] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.452855] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 16.453851] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 16.584363] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 16.585435] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 16.683137] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 16.915349] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 18.926141] ax88179_178a 2-1:1.0 enxec2280a33c93: ax88179 - Link status =
is: 1
[ 18.931732] IPv6: ADDRCONF(NETDEV_CHANGE): enxec2280a33c93: link becomes=
ready
[ 21.957883] nouveau 0000:01:00.0: DRM: evicting buffers...
[ 21.978036] nouveau 0000:01:00.0: DRM: waiting for kernel channels to go=
idle...
[ 21.978069] nouveau 0000:01:00.0: DRM: suspending client object trees...
[ 21.982537] nouveau 0000:01:00.0: DRM: suspending kernel object tree...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20170830164649.5c4cc070>