Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 18 Apr 2017 10:30:06 -0700
From:      jungle Boogie <jungleboogie0@gmail.com>
To:        Ian Lepore <ian@freebsd.org>
Cc:        =?UTF-8?B?T3RhY8OtbGlv?= <otacilio.neto@bsd.com.br>,  "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org>
Subject:   Re: beaglebone black: MMC partition switch failed
Message-ID:  <CAKE2PDt2JejhXa8yY%2Bv8G276TwEvxAgFg0TsJXvzWMgOd36nxg@mail.gmail.com>
In-Reply-To: <1492534652.96207.28.camel@freebsd.org>
References:  <5bac0dbc-6d2b-c757-0cd3-babbd048cfd2@gmail.com> <CAKE2PDubyQx2VtOJQt=2NTYVDgfUzxi1UO5RDhJ_M0xVe2nZRg@mail.gmail.com> <20170418155102.GO2455@FreeBSD.org> <e3db0f4b-ff4c-0c23-3fac-933d953d6f9c@bsd.com.br> <1492534652.96207.28.camel@freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On 18 April 2017 at 09:57, Ian Lepore <ian@freebsd.org> wrote:
> The 20170405 image Glen mentioned works fine, I just DLed and tested
> it.


Thanks for the confirmation, but that means something different is
happening to my BBB.

I wrote that build to my SD card, put it in the BBB, held down s2,
powered it up:

U-Boot SPL 2017.01-rc3 (Apr 05 2017 - 05:21:19)
Trying to boot from MMC1** First descriptor is NOT a primary desc on 0:1 **
MMC partition switch failed
*** Warning - MMC partition switch failed, using default environment

** Partition 1 not valid on device 0 **
spl_register_fat_device: fat register err - -1
spl_load_image_fat: error reading image u-boot.img, err - -1
MMC partition switch failed
*** Warning - MMC partition switch failed, using default environment

spl: no partition table found
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###


This says U-Boot 2017.01, is that the uboot version? If I boot the BBB
up without a card and halt the boot process, I get a u-boot prompt.
>From there, I can check the version:
U-Boot 2013.04-dirty (Jul 10 2013 - 14:02:53)
arm-angstrom-linux-gnueabi-gcc (Linaro GCC 4.7-2013.02-01) 4.7.3
20130205 (prerelease)
GNU ld (GNU Binutils) 2.22


Does this version need to be more recent for it to read data from the SD card?

Thanks!



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKE2PDt2JejhXa8yY%2Bv8G276TwEvxAgFg0TsJXvzWMgOd36nxg>