Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 18 May 2015 14:42:51 +0000
From:      "Eggert, Lars" <lars@netapp.com>
To:        Ryan Stone <rysto32@gmail.com>
Cc:        "current@freebsd.org" <current@freebsd.org>
Subject:   Re: ixl and BOOTP
Message-ID:  <FF5BDAA5-D9C0-4958-B900-1D141194EE30@netapp.com>
In-Reply-To: <CAFMmRNz4=wM413oEKs0xUHOqeNQdQv6hpot=okLMB57jsYR5aw@mail.gmail.com>
References:  <B4B558C2-34A8-4AFF-A411-28BEA3906262@netapp.com> <CAFMmRNz4=wM413oEKs0xUHOqeNQdQv6hpot=okLMB57jsYR5aw@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail=_A6A99AD4-B41A-4400-977E-338DCFC75ABA
Content-Type: multipart/mixed;
	boundary="Apple-Mail=_9CD72BB6-A8F9-4869-837F-5D7081638B6C"


--Apple-Mail=_9CD72BB6-A8F9-4869-837F-5D7081638B6C
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
	charset=us-ascii

On 2015-5-18, at 16:08, Ryan Stone <rysto32@gmail.com> wrote:
> This is very strange.  I have successfully netbooted -CURRENT in a =
very
> similar environment (ixl compiled into kernel and booting over igb).  =
I
> can't remember when the last time I did this but it was probably =
within the
> last couple of weeks.  I routinely netboot an 8.2 derivative in this =
kind
> of environment and I've never seen this kind of problem.

It used to work here, too. Something recently must have broken this.

> Could it be related to the size of the kernel, and not ixl =
specifically?

I don't know. Why would the size of the kernel matter?

> Also, do you have any indication as to where the hang happens?  Is it =
still
> in the BIOS, or in pxeloader, or in the kernel itself?  Are you =
booting in
> legacy mode or EFI?

Legacy mode, and it hangs in the kernel.

Without if_ixl in loader.conf, it does the usual BOOTP logic:

ses0 at ahciem0 bus 0 scbus7 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSC2BW180A3F 400i> ACS-2 ATA SATA 3.x device
ada0: Serial Number CVCV3102050X180EGN
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 171705MB (351651888 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=3D0x1<4K>
ada0: Previously was known as ad4
Sending DHCP Discover packet from interface igb0 (00:25:90:9b:73:2e)
Sending DHCP Discover packet from interface igb1 (00:25:90:9b:73:2f)
Sending DHCP Discover packet from interface ix0 (90:e2:ba:77:d4:9c)
Sending DHCP Discover packet from interface ix1 (90:e2:ba:77:d4:9d)
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> =
on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> =
on usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <American Megatrends Inc.> at usbus0
ukbd0: <Keyboard Interface> on usbus0
ums0: <Mouse Interface> on usbus0
ums0: 3 buttons and [Z] coordinates ID=3D0
igb0: link state changed to UP
Received DHCP Offer packet on igb0 from 192.168.0.2 (accepted) (no root =
path) (boot_file)
Received DHCP Offer packet on igb0 from 192.168.0.2 (ignored) (no root =
path) (boot_file)
Received DHCP Offer packet on igb0 from 192.168.0.2 (ignored) (no root =
path) (boot_file)
Sending DHCP Request packet from interface igb0 (00:25:90:9b:73:2e)
Received DHCP Ack packet on igb0 from 192.168.0.2 (accepted) (got root =
path)
DHCP timeout for interface igb1
DHCP timeout for interface ix0
DHCP timeout for interface ix1
Wired loader interface (IP 192.168.11.1) is igb0
igb0 at 192.168.11.1 server 192.168.0.2 boot file /pxe/pxelinux.0
subnet mask 255.255.0.0 router 192.168.0.2 rootfs =
192.168.0.10:/home/elars/dst hostname phobos2
Adjusted interface igb0
Shutdown interface igb1
Shutdown interface ix0
Shutdown interface ix1
...
And then later on mount the rootfs correctly:

Trying to mount root from nfs: []...
NFS ROOT: 192.168.0.10:/home/elars/dst
Interface igb0 IP-Address 192.168.11.1 Broadcast 192.168.255.255
Setting hostuuid: 00000000-0000-0000-0000-0025909b732e.
Setting hostid: 0xe85d6456.
...

If I enable if_ixl in loader.conf, I don't see any "Sending DHCP =
Discover packet" messages in the log at all, and consequently the NFS =
mount fails. See the attached diff; on the left is a boot without =
if_ixl, and on the right, with if_ixl.

Lars


--Apple-Mail=_9CD72BB6-A8F9-4869-837F-5D7081638B6C
Content-Disposition: attachment;
	filename=n-from-.diff.html
MIME-Version: 1.0
Content-Type: text/plain; name="n-from-.diff.html"



    ok   nok
   B2 B2
   ______ ____ _____ _____ ______ ____ _____ _____
   | ____| | _ \ / ____| __ \ | ____| | _ \ / ____| __ \
   | |___ _ __ ___ ___ | |_) | (___ | | | | | |___ _ __ ___ ___ | |_) |
   (___ | | | |
   | ___| '__/ _ \/ _ \| _ < \___ \| | | | | ___| '__/ _ \/ _ \| _ < \___
   \| | | |
   | | | | | __/ __/| |_) |____) | |__| | | | | | | __/ __/| |_) |____) |
   |__| |
   | | | | | | || | | | | | | | | | || | | |
   Xen 4.6-unstabled.ko size 0x2c00 at 0x106200000` `
   /boot/kernel/cc_htcp.ko size 0x2f90 at 0x109e0000 `
   (XEN) Xen version 4.6-unstable (root@netapp.com) (gcc47 (FreeBSD Ports
   Collection) 4.7.4) debug=y Mon May 18 14:50:17 CEST 2015ko size 0x30d0
   at 0x1068000 .--` /y:` +. /boot/kernel/cc_vegas.ko size 0x30d0 at
   0x10a1000.....---.......--.``` -/
   (XEN) Latest ChangeSet: | yo`:. :o `+- Booting...el/cc_hd.ko size
   0x2c00 at 0x109b000o .--` /y:` +.
   (XEN) Bootloader: FreeBSD Loader | y/ -/` -o/ Xen 4.6-unstable | yo`:.
   :o `+-
   (XEN) Command line: dom0_mem=4096M dom0pvh=1 com1=115200,8n1
   console=com1. (XEN) Xen version 4.6-unstable (root@netapp.com) (gcc47
   (FreeBSD Ports Collection) 4.7.4) debug=y Mon May 18 14:50:17 CEST
   2015ser | .- ::/sy+:.
   (XEN) Video information:r prompt | / `-- / (XEN) Latest ChangeSet: r p
   | / `-- /
   (XEN) VGA is text mode 80x25, font 8x16 | `: :` (XEN) Bootloader:
   FreeBSD Loader | `: :`
   (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds :` (XEN)
   Command line: dom0_mem=4096M dom0pvh=1 com1=115200,8n1 console=com1:`
   (XEN) EDID info not retrieved because no DDC retrieval method detected
   / (XEN) Video information: | / /
   (XEN) Disc information: (1 of 2) | .- -. (XEN) VGA is text mode 80x25,
   font 8x16 | .- -.
   (XEN) Found 1 MBR signaturesns... | -- -. (XEN) VBE/DDC methods: none;
   EDID transfer time: 0 seconds -.
   (XEN) Found 1 EDD information structures | `:` `:` (XEN) EDID info not
   retrieved because no DDC retrieval method detected`
   (XEN) Xen-e820 RAM map: | .-- `--. (XEN) Disc information: | .-- `--.
   (XEN) 0000000000000000 - 000000000009ac00 (usable) .---.....----. (XEN)
   Found 1 MBR signatures | .---.....----.
   (XEN) Found 1 EDD information structures==+
   (XEN) Xen-e820 RAM map:
   (XEN) 0000000000000000 - 000000000009ac00 (usable)
   (XEN) 000000000009ac00 - 00000000000a0000 (reserved) (XEN)
   000000000009ac00 - 00000000000a0000 (reserved)
   (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN)
   00000000000e0000 - 0000000000100000 (reserved)
   (XEN) 0000000000100000 - 000000007de19000 (usable) (XEN)
   0000000000100000 - 000000007de19000 (usable)
   (XEN) 000000007de19000 - 000000007dea8000 (reserved) (XEN)
   000000007de19000 - 000000007dea8000 (reserved)
   (XEN) 000000007dea8000 - 000000007dfb1000 (ACPI data) (XEN)
   000000007dea8000 - 000000007dfb1000 (ACPI data)
   (XEN) 000000007dfb1000 - 000000007e1cb000 (ACPI NVS) (XEN)
   000000007dfb1000 - 000000007e1cb000 (ACPI NVS)
   (XEN) 000000007e1cb000 - 000000007f355000 (reserved) (XEN)
   000000007e1cb000 - 000000007f355000 (reserved)
   (XEN) 000000007f355000 - 000000007f800000 (ACPI NVS) (XEN)
   000000007f355000 - 000000007f800000 (ACPI NVS)
   (XEN) 0000000080000000 - 0000000090000000 (reserved) (XEN)
   0000000080000000 - 0000000090000000 (reserved)
   (XEN) 00000000fed1c000 - 00000000fed40000 (reserved) (XEN)
   00000000fed1c000 - 00000000fed40000 (reserved)
   skipping to change at line 89 skipping to change at line 92
   (XEN) SRAT: PXM 1 -> APIC 41 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 41 ->
   Node 1
   (XEN) SRAT: PXM 1 -> APIC 42 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 42 ->
   Node 1
   (XEN) SRAT: PXM 1 -> APIC 43 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 43 ->
   Node 1
   (XEN) SRAT: PXM 1 -> APIC 44 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 44 ->
   Node 1
   (XEN) SRAT: PXM 1 -> APIC 45 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 45 ->
   Node 1
   (XEN) SRAT: PXM 1 -> APIC 46 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 46 ->
   Node 1
   (XEN) SRAT: PXM 1 -> APIC 47 -> Node 1 (XEN) SRAT: PXM 1 -> APIC 47 ->
   Node 1
   (XEN) SRAT: Node 0 PXM 0 0-80000000 (XEN) SRAT: Node 0 PXM 0 0-80000000
   (XEN) SRAT: Node 0 PXM 0 100000000-1080000000 (XEN) SRAT: Node 0 PXM 0
   100000000-1080000000
   (XEN) SRAT: Node 1 PXM 1 1080000000-2080000000 (XEN) SRAT: Node 1 PXM 1
   1080000000-2080000000
   (XEN) NUMA: Allocated memnodemap from 207f338000 - 207f339000 (XEN)
   NUMA: Allocated memnodemap from 207f2ff000 - 207f300000
   (XEN) NUMA: Using 19 for the hash shift. (XEN) NUMA: Using 19 for the
   hash shift.
   (XEN) Domain heap initialised DMA width 32 bits (XEN) Domain heap
   initialised DMA width 32 bits
   (XEN) found SMP MP-table at 000fdc30 (XEN) found SMP MP-table at
   000fdc30
   (XEN) DMI 2.7 present. (XEN) DMI 2.7 present.
   (XEN) Using APIC driver default (XEN) Using APIC driver default
   (XEN) ACPI: PM-Timer IO Port: 0x408 (XEN) ACPI: PM-Timer IO Port: 0x408
   (XEN) ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0] (XEN)
   ACPI: SLEEP INFO: pm1x_cnt[1:404,1:0], pm1x_evt[1:400,1:0]
   (XEN) ACPI: 32/64X FACS address mismatch in FADT -
   7e1c2080/0000000000000000, using 32 (XEN) ACPI: 32/64X FACS address
   mismatch in FADT - 7e1c2080/0000000000000000, using 32
   (XEN) ACPI: wakeup_vec[7e1c208c], vec_size[20] (XEN) ACPI:
   wakeup_vec[7e1c208c], vec_size[20]
   (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: Local APIC
   address 0xfee00000
   skipping to change at line 217 skipping to change at line 220
   (XEN) ACPI: IRQ9 used by override. (XEN) ACPI: IRQ9 used by override.
   (XEN) Enabling APIC mode: Phys. Using 3 I/O APICs (XEN) Enabling APIC
   mode: Phys. Using 3 I/O APICs
   (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) ACPI: HPET id:
   0x8086a701 base: 0xfed00000
   (XEN) Xen ERST support is initialized. (XEN) Xen ERST support is
   initialized.
   (XEN) HEST: Table parsing has been initialized (XEN) HEST: Table
   parsing has been initialized
   (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using
   ACPI (MADT) for SMP configuration information
   (XEN) SMP: Allowing 32 CPUs (0 hotplug CPUs) (XEN) SMP: Allowing 32
   CPUs (0 hotplug CPUs)
   (XEN) IRQ limits: 72 GSI, 6088 MSI/MSI-X (XEN) IRQ limits: 72 GSI, 6088
   MSI/MSI-X
   (XEN) Switched to APIC driver x2apic_cluster. (XEN) Switched to APIC
   driver x2apic_cluster.
   (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Using
   scheduler: SMP Credit Scheduler (credit)
   (XEN) Detected 2000.052 MHz processor. (XEN) Detected 2000.078 MHz
   processor.
   (XEN) Initing memory sharing. (XEN) Initing memory sharing.
   (XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7 (XEN)
   xstate_init: using cntxt_size: 0x340 and states: 0x7
   (XEN) mce_intel.c:735: MCA Capability: BCAST 1 SER 1 CMCI 1 firstbank 0
   extended MCE MSR 0 (XEN) mce_intel.c:735: MCA Capability: BCAST 1 SER 1
   CMCI 1 firstbank 0 extended MCE MSR 0
   (XEN) Intel machine check reporting enabled (XEN) Intel machine check
   reporting enabled
   (XEN) alt table ffff82d0802deab0 -> ffff82d0802dfd40 (XEN) alt table
   ffff82d0802deab0 -> ffff82d0802dfd40
   (XEN) PCI: MCFG configuration 0: base 80000000 segment 0000 buses 00 -
   ff (XEN) PCI: MCFG configuration 0: base 80000000 segment 0000 buses 00
   - ff
   (XEN) PCI: MCFG area at 80000000 reserved in E820 (XEN) PCI: MCFG area
   at 80000000 reserved in E820
   (XEN) PCI: Using MCFG for segment 0000 bus 00-ff (XEN) PCI: Using MCFG
   for segment 0000 bus 00-ff
   (XEN) Intel VT-d iommu 0 supported page sizes: 4kB, 2MB, 1GB. (XEN)
   Intel VT-d iommu 0 supported page sizes: 4kB, 2MB, 1GB.
   (XEN) Intel VT-d iommu 1 supported page sizes: 4kB, 2MB, 1GB. (XEN)
   Intel VT-d iommu 1 supported page sizes: 4kB, 2MB, 1GB.
   skipping to change at line 294 skipping to change at line 297
   (XEN) elf_paddr_offset = 0xffffffff80000000 (XEN) elf_paddr_offset =
   0xffffffff80000000
   (XEN) virt_offset = 0x0 (XEN) virt_offset = 0x0
   (XEN) virt_kstart = 0xffffffff80200000 (XEN) virt_kstart =
   0xffffffff80200000
   (XEN) virt_kend = 0xffffffff8135e110 (XEN) virt_kend =
   0xffffffff8135e110
   (XEN) virt_entry = 0xffffffff80854000 (XEN) virt_entry =
   0xffffffff80854000
   (XEN) p2m_base = 0xffffffffffffffff (XEN) p2m_base = 0xffffffffffffffff
   (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Xen kernel: 64-bit, lsb,
   compat32
   (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0xffffffff80200000 ->
   0xffffffff811745e8 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr
   0xffffffff80200000 -> 0xffffffff811745e8
   (XEN) Dom0 symbol map 0xffffffff811745e8 -> 0xffffffff8135e110 (XEN)
   Dom0 symbol map 0xffffffff811745e8 -> 0xffffffff8135e110
   (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) PHYSICAL MEMORY ARRANGEMENT:
   (XEN) Dom0 alloc.: 0000001030000000->0000001032000000 (1040320 pages to
   be allocated) (XEN) Dom0 alloc.: 0000001030000000->0000001032000000
   (1040263 pages to be allocated)
   (XEN) Init. ramdisk: 000000207ffc0000->0000002080000000 (XEN) Init.
   ramdisk: 000000207ff87000->0000002080000000
   (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) VIRTUAL MEMORY ARRANGEMENT:
   (XEN) Loaded kernel: ffffffff80200000->ffffffff8135e110 (XEN) Loaded
   kernel: ffffffff80200000->ffffffff8135e110
   (XEN) Init. ramdisk: ffffffff8135f000->ffffffff8139f000 (XEN) Init.
   ramdisk: ffffffff8135f000->ffffffff813d8000
   (XEN) Phys-Mach map: ffffffff8139f000->ffffffff81b9f000 (XEN) Phys-Mach
   map: ffffffff813d8000->ffffffff81bd8000
   (XEN) Start info: ffffffff81b9f000->ffffffff81ba04b4 (XEN) Start info:
   ffffffff81bd8000->ffffffff81bd94b4
   (XEN) Page tables: ffffffff81ba1000->ffffffff81bb4000 (XEN) Page
   tables: ffffffff81bda000->ffffffff81bed000
   (XEN) Boot stack: ffffffff81bb4000->ffffffff81bb5000 (XEN) Boot stack:
   ffffffff81bed000->ffffffff81bee000
   (XEN) TOTAL: ffffffff80000000->ffffffff82000000 (XEN) TOTAL:
   ffffffff80000000->ffffffff82000000
   (XEN) ENTRY ADDRESS: ffffffff80854000 (XEN) ENTRY ADDRESS:
   ffffffff80854000
   (XEN) Dom0 has maximum 32 VCPUs (XEN) Dom0 has maximum 32 VCPUs
   (XEN) elf_load_binary: phdr 2 at 0xffffffff80200000 ->
   0xffffffff80b9d3f0 (XEN) elf_load_binary: phdr 2 at 0xffffffff80200000
   -> 0xffffffff80b9d3f0
   (XEN) elf_load_binary: phdr 3 at 0xffffffff80d9d3f0 ->
   0xffffffff80e487b8 (XEN) elf_load_binary: phdr 3 at 0xffffffff80d9d3f0
   -> 0xffffffff80e487b8
   (XEN) elf_load_bsdsyms: shdr 4 at 0xffff83207f3a4b70 ->
   0xffffffff81174f70 (XEN) elf_load_bsdsyms: shdr 4 at 0xffff83207f36bb70
   -> 0xffffffff81174f70
   (XEN) elf_load_bsdsyms: shdr 34 at 0xffff83207fe11b65 ->
   0xffffffff811b0c48 (XEN) elf_load_bsdsyms: shdr 34 at
   0xffff83207fdd8b65 -> 0xffffffff811b0c48
   (XEN) elf_load_bsdsyms: shdr 35 at 0xffff83207fe12670 ->
   0xffffffff811b0e10 (XEN) elf_load_bsdsyms: shdr 35 at
   0xffff83207fdd9670 -> 0xffffffff811b0e10
   (XEN) elf_load_bsdsyms: shdr 36 at 0xffff83207feeb4c8 ->
   0xffffffff81289c68 (XEN) elf_load_bsdsyms: shdr 36 at
   0xffff83207feb24c8 -> 0xffffffff81289c68
   (XEN) Found masked UR signaling on 0000:00:00.0 (XEN) Found masked UR
   signaling on 0000:00:00.0
   (XEN) Found masked UR signaling on 0000:00:01.0 (XEN) Found masked UR
   signaling on 0000:00:01.0
   (XEN) Found masked UR signaling on 0000:00:01.1 (XEN) Found masked UR
   signaling on 0000:00:01.1
   (XEN) Found masked UR signaling on 0000:00:02.0 (XEN) Found masked UR
   signaling on 0000:00:02.0
   (XEN) Found masked UR signaling on 0000:00:02.2 (XEN) Found masked UR
   signaling on 0000:00:02.2
   (XEN) Found masked UR signaling on 0000:00:03.0 (XEN) Found masked UR
   signaling on 0000:00:03.0
   (XEN) Found masked UR signaling on 0000:00:03.2 (XEN) Found masked UR
   signaling on 0000:00:03.2
   (XEN) Masked VT-d error signaling on 0000:00:05.0 (XEN) Masked VT-d
   error signaling on 0000:00:05.0
   (XEN) Found masked UR signaling on 0000:80:02.0 (XEN) Found masked UR
   signaling on 0000:80:02.0
   (XEN) Found masked UR signaling on 0000:80:03.0 (XEN) Found masked UR
   signaling on 0000:80:03.0
   skipping to change at line 354 skipping to change at line 357
   CPU: Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz (2000.00-MHz K8-class
   CPU) CPU: Intel(R) Xeon(R) CPU E5-2650 0 @ 2.00GHz (2000.00-MHz
   K8-class CPU)
   Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7
   Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7
   Features=0x1fc3ebff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,MCA
   ,CMOV,PAT,PSE36,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
   Features=0x1fc3ebff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,MCA
   ,CMOV,PAT,PSE36,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT>
   Features2=0x9fb82283<SSE3,PCLMULQDQ,EST,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC
   ,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
   Features2=0x9fb82283<SSE3,PCLMULQDQ,EST,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC
   ,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,HV>
   AMD Features=0x20100800<SYSCALL,NX,LM> AMD
   Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF> AMD Features2=0x1<LAHF>
   XSAVE Features=0x1<XSAVEOPT> XSAVE Features=0x1<XSAVEOPT>
   TSC: P-state invariant, performance statistics TSC: P-state invariant,
   performance statistics
   Hypervisor: Origin = "XenVMMXenVMM" Hypervisor: Origin = "XenVMMXenVMM"
   real memory = 6478413824 (6178 MB) real memory = 6478413824 (6178 MB)
   avail memory = 4070391808 (3881 MB) avail memory = 4070137856 (3881 MB)
   FreeBSD/SMP: Multiprocessor System Detected: 32 CPUs FreeBSD/SMP:
   Multiprocessor System Detected: 32 CPUs
   FreeBSD/SMP: 2 package(s) x 16 core(s) FreeBSD/SMP: 2 package(s) x 16
   core(s)
   cpu0 (BSP): APIC ID: 0 cpu0 (BSP): APIC ID: 0
   cpu1 (AP): APIC ID: 2 cpu1 (AP): APIC ID: 2
   cpu2 (AP): APIC ID: 4 cpu2 (AP): APIC ID: 4
   cpu3 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 6
   cpu4 (AP): APIC ID: 8 cpu4 (AP): APIC ID: 8
   cpu5 (AP): APIC ID: 10 cpu5 (AP): APIC ID: 10
   cpu6 (AP): APIC ID: 12 cpu6 (AP): APIC ID: 12
   cpu7 (AP): APIC ID: 14 cpu7 (AP): APIC ID: 14
   skipping to change at line 509 skipping to change at line 512
   igb0: Ethernet address: 00:25:90:9b:73:2e igb0: Ethernet address:
   00:25:90:9b:73:2e
   igb0: netmap queues/slots: TX 1/1024, RX 1/1024 igb0: netmap
   queues/slots: TX 1/1024, RX 1/1024
   igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port
   0x8000-0x801f mem 0xdf800000-0xdf81ffff,0xdf840000-0xdf843fff irq 30 at
   device 0.1 on pci2 igb1: <Intel(R) PRO/1000 Network Connection version
   - 2.4.0> port 0x8000-0x801f mem
   0xdf800000-0xdf81ffff,0xdf840000-0xdf843fff irq 30 at device 0.1 on
   pci2
   igb1: Using an MSI interrupt igb1: Using an MSI interrupt
   igb1: Ethernet address: 00:25:90:9b:73:2f igb1: Ethernet address:
   00:25:90:9b:73:2f
   igb1: netmap queues/slots: TX 1/1024, RX 1/1024 igb1: netmap
   queues/slots: TX 1/1024, RX 1/1024
   pcib3: <ACPI PCI-PCI bridge> irq 33 at device 2.0 on pci0 pcib3: <ACPI
   PCI-PCI bridge> irq 33 at device 2.0 on pci0
   pci4: <Xen ACPI PCI bus> on pcib3 pci4: <Xen ACPI PCI bus> on pcib3
   (XEN) PCI add device 0000:04:00.0 (XEN) PCI add device 0000:04:00.0
   (XEN) PCI add device 0000:04:00.1 (XEN) PCI add device 0000:04:00.1
   pci4: <network, ethernet> at device 0.0 (no driver attached) ixl0:
   <Intel(R) Ethernet Connection XL710 Driver, Version - 1.4.1> mem
   0xdc800000-0xdcffffff,0xdd808000-0xdd80ffff irq 32 at device 0.0 on
   pci4
   pci4: <network, ethernet> at device 0.1 (no driver attached) ixl0:
   Using an MSI interrupt
   ixl0: f4.22 a1.2 n04.24 e800013fc
   ixl0: Using defaults for TSO: 65518/35/2048
   ixl0: Ethernet address: 68:05:ca:32:15:d0
   ixl0: PCI Express Bus: Speed 8.0GT/s Width x8
   queues is 0xfffff80004d76c00
   ixl0: netmap queues/slots: TX 1/1024, RX 1/1024
   ixl1: <Intel(R) Ethernet Connection XL710 Driver, Version - 1.4.1> mem
   0xdc000000-0xdc7fffff,0xdd800000-0xdd807fff irq 32 at device 0.1 on
   pci4
   ixl1: Using an MSI interrupt
   ixl1: f4.22 a1.2 n04.24 e800013fc
   ixl1: Using defaults for TSO: 65518/35/2048
   ixl1: Ethernet address: 68:05:ca:32:15:d1
   ixl1: PCI Express Bus: Speed 8.0GT/s Width x8
   queues is 0xfffff80004d75000
   ixl1: netmap queues/slots: TX 1/1024, RX 1/1024
   pcib4: <ACPI PCI-PCI bridge> irq 33 at device 2.2 on pci0 pcib4: <ACPI
   PCI-PCI bridge> irq 33 at device 2.2 on pci0
   pci6: <Xen ACPI PCI bus> on pcib4 pci6: <Xen ACPI PCI bus> on pcib4
   pcib5: <ACPI PCI-PCI bridge> irq 41 at device 3.0 on pci0 pcib5: <ACPI
   PCI-PCI bridge> irq 41 at device 3.0 on pci0
   pci7: <Xen ACPI PCI bus> on pcib5 pci7: <Xen ACPI PCI bus> on pcib5
   pcib6: <ACPI PCI-PCI bridge> irq 41 at device 3.2 on pci0 pcib6: <ACPI
   PCI-PCI bridge> irq 41 at device 3.2 on pci0
   pci8: <Xen ACPI PCI bus> on pcib6 pci8: <Xen ACPI PCI bus> on pcib6
   (XEN) PCI add device 0000:08:00.0 (XEN) PCI add device 0000:08:00.0
   (XEN) PCI add device 0000:08:00.1 (XEN) PCI add device 0000:08:00.1
   ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 2.8.3>
   port 0x7020-0x703f mem 0xdf180000-0xdf1fffff,0xdf604000-0xdf607fff irq
   42 at device 0.0 on pci8 ix0: <Intel(R) PRO/10GbE PCI-Express Network
   Driver, Version - 2.8.3> port 0x7020-0x703f mem
   0xdf180000-0xdf1fffff,0xdf604000-0xdf607fff irq 42 at device 0.0 on
   pci8
   ix0: Using an MSI interrupt ix0: Using an MSI interrupt
   skipping to change at line 709 skipping to change at line 726
   uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart1:
   <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
   ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 ipmi0: <IPMI
   System Interface> port 0xca2,0xca3 on acpi0
   ipmi0: KCS mode found at io 0xca2 on acpi ipmi0: KCS mode found at io
   0xca2 on acpi
   ichwd0 on isa0 ichwd0 on isa0
   ichwd0: unable to reserve SMI registers ichwd0: unable to reserve SMI
   registers
   device_attach: ichwd0 attach returned 6 device_attach: ichwd0 attach
   returned 6
   ichwd0 at port 0x430-0x437 on isa0 ichwd0 at port 0x430-0x437 on isa0
   ichwd0: unable to reserve SMI registers ichwd0: unable to reserve SMI
   registers
   device_attach: ichwd0 attach returned 6 device_attach: ichwd0 attach
   returned 6
   orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on
   isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff
   on isa0
   usbus0: 480Mbps High Speed USB v2.0
   fuse-freebsd: version 0.4.4, FUSE ABI 7.8 fuse-freebsd: version 0.4.4,
   FUSE ABI 7.8
   Timecounters tick every 1.000 msec Timecounters tick every 1.000 msec
   usbus0: 480Mbps High Speed USB v2.0
   iw_cxgb: Chelsio T3 RDMA Driver loaded iw_cxgb: Chelsio T3 RDMA Driver
   loaded
   ipfw2 (+ipv6) initialized, divert loadable, nat enabled, default to
   accept, logging disabled ipfw2 (+ipv6) initialized, divert loadable,
   nat enabled, default to accept, logging disabled
   DUMMYNET 0 with IPv6 initialized (100409) DUMMYNET 0 with IPv6
   initialized (100409)
   load_dn_sched dn_sched RR loaded
   load_dn_sched dn_sched WF2Q+ loaded
   load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched FIFO loaded
   load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched PRIO loaded
   load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched QFQ loaded
   load_dn_sched dn_sched RR loaded
   load_dn_sched dn_sched WF2Q+ loaded
   interrupt storm detected on "irq16:"; throttling interrupt source
   interrupt storm detected on "irq16:"; throttling interrupt source
   ipmi0: IPMI device rev. 1, firmware rev. 2.35, version 2.0 ipmi0: IPMI
   device rev. 1, firmware rev. 2.35, version 2.0
   ipmi0: Number of channels 3 ipmi0: Number of channels 3
   ipmi0: Attached watchdog ipmi0: Attached watchdog
   usbus1: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0
   ugen1.1: <Intel> at usbus1 ugen1.1: <Intel> at usbus1
   ugen0.1: <Intel> at usbus0 ugen0.1: <Intel> at usbus0
   uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
   usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
   on usbus0
   uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on
   usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>
   on usbus1
   ses0 at ahciem0 bus 0 scbus7 target 0 lun 0 ses0 at ahciem0 bus 0
   scbus7 target 0 lun 0
   ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0:
   <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
   ses0: SEMB SES Device ses0: SEMB SES Device
   ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0 at ahcich0 bus 0
   scbus1 target 0 lun 0
   ada0: <INTEL SSDSC2BW180A3F 400i> ACS-2 ATA SATA 3.x device ada0:
   <INTEL SSDSC2BW180A3F 400i> ACS-2 ATA SATA 3.x device
   ada0: Serial Number CVCV3102050X180EGN ada0: Serial Number
   CVCV3102050X180EGN
   ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0:
   600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
   ada0: Command Queueing enabled ada0: Command Queueing enabled
   ada0: 171705MB (351651888 512 byte sectors: 16H 63S/T 16383C) ada0:
   171705MB (351651888 512 byte sectors: 16H 63S/T 16383C)
   ada0: quirks=0x1<4K> ada0: quirks=0x1<4K>
   ada0: Previously was known as ad4 ada0: Previously was known as ad4
   Sending DHCP Discover packet from interface igb0 (00:25:90:9b:73:2e)
   Sending DHCP Discover packet from interface igb1 (00:25:90:9b:73:2f)
   Sending DHCP Discover packet from interface ix0 (90:e2:ba:77:d4:9c)
   Sending DHCP Discover packet from interface ix1 (90:e2:ba:77:d4:9d)
   uhub1: 2 ports with 2 removable, self powered
   uhub0: 2 ports with 2 removable, self powered
   ugen0.2: <vendor 0x8087> at usbus0
   uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
   on usbus0
   ugen1.2: <vendor 0x8087> at usbus1
   uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
   on usbus1
   uhub2: 6 ports with 6 removable, self powered
   uhub3: 8 ports with 8 removable, self powered
   ugen0.3: <American Megatrends Inc.> at usbus0
   ukbd0: <Keyboard Interface> on usbus0
   ums0: <Mouse Interface> on usbus0
   ums0: 3 buttons and [Z] coordinates ID=0
   igb0: link state changed to UP
   Received DHCP Offer packet on igb0 from 192.168.0.2 (accepted) (no root
   path) (boot_file)
   Received DHCP Offer packet on igb0 from 192.168.0.2 (ignored) (no root
   path) (boot_file)
   Received DHCP Offer packet on igb0 from 192.168.0.2 (ignored) (no root
   path) (boot_file)
   Sending DHCP Request packet from interface igb0 (00:25:90:9b:73:2e)
   Received DHCP Ack packet on igb0 from 192.168.0.2 (accepted) (got root
   path)
   DHCP timeout for interface igb1
   DHCP timeout for interface ix0
   DHCP timeout for interface ix1
   Wired loader interface (IP 192.168.11.1) is igb0
   igb0 at 192.168.11.1 server 192.168.0.2 boot file /pxe/pxelinux.0
   subnet mask 255.255.0.0 router 192.168.0.2 rootfs
   192.168.0.10:/home/elars/dst hostname phobos2
   Adjusted interface igb0
   Shutdown interface igb1
   Shutdown interface ix0
   Shutdown interface ix1
   random: unblocking device. random: unblocking device.
   SMP: AP CPU #2 Launched! SMP: AP CPU #19 Launched!
   SMP: AP CPU #1 Launched!
   SMP: AP CPU #31 Launched! SMP: AP CPU #31 Launched!
   SMP: AP CPU #28 Launched! SMP: AP CPU #30 Launched!
   SMP: AP CPU #12 Launched! SMP: AP CPU #29 Launched!
   SMP: AP CPU #5 Launched! SMP: AP CPU #24 Launched!
   SMP: AP CPU #15 Launched!
   SMP: AP CPU #14 Launched!
   SMP: AP CPU #25 Launched!
   SMP: AP CPU #22 Launched!
   SMP: AP CPU #13 Launched!
   SMP: AP CPU #8 Launched!
   SMP: AP CPU #11 Launched!
   SMP: AP CPU #17 Launched!
   SMP: AP CPU #3 Launched!
   SMP: AP CPU #4 Launched! SMP: AP CPU #4 Launched!
   SMP: AP CPU #20 Launched!
   SMP: AP CPU #18 Launched! SMP: AP CPU #18 Launched!
   SMP: AP CPU #2 Launched!
   SMP: AP CPU #17 Launched!
   SMP: AP CPU #27 Launched! SMP: AP CPU #27 Launched!
   SMP: AP CPU #9 Launched! SMP: AP CPU #22 Launched!
   SMP: AP CPU #30 Launched! SMP: AP CPU #23 Launched!
   SMP: AP CPU #20 Launched!
   SMP: AP CPU #21 Launched! SMP: AP CPU #21 Launched!
   SMP: AP CPU #29 Launched! SMP: AP CPU #28 Launched!
   SMP: AP CPU #10 Launched! SMP: AP CPU #12 Launched!
   SMP: AP CPU #24 Launched! SMP: AP CPU #9 Launched!
   SMP: AP CPU #1 Launched! SMP: AP CPU #8 Launched!
   SMP: AP CPU #6 Launched!
   SMP: AP CPU #26 Launched! SMP: AP CPU #26 Launched!
   SMP: AP CPU #23 Launched! SMP: AP CPU #25 Launched!
   SMP: AP CPU #19 Launched! SMP: AP CPU #11 Launched!
   SMP: AP CPU #16 Launched! SMP: AP CPU #13 Launched!
   SMP: AP CPU #10 Launched!
   SMP: AP CPU #15 Launched!
   SMP: AP CPU #3 Launched!
   SMP: AP CPU #5 Launched!
   SMP: AP CPU #7 Launched! SMP: AP CPU #7 Launched!
   SMP: AP CPU #16 Launched!
   SMP: AP CPU #14 Launched!
   SMP: AP CPU #6 Launched!
   hwpc_core: unknown PMC architecture: 0 hwpc_core: unknown PMC
   architecture: 0
   hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> hwpmc:
   SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
   Root mount waiting for: usbus1 usbus0
   uhub0: 2 ports with 2 removable, self powered
   uhub1: 2 ports with 2 removable, self powered
   Root mount waiting for: usbus1 usbus0
   ugen1.2: <vendor 0x8087> at usbus1
   uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
   on usbus1
   ugen0.2: <vendor 0x8087> at usbus0
   uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
   on usbus0
   Root mount waiting for: usbus1 usbus0
   uhub3: 6 ports with 6 removable, self powered
   uhub2: 8 ports with 8 removable, self powered
   ugen0.3: <American Megatrends Inc.> at usbus0
   ukbd0: <Keyboard Interface> on usbus0
   ums0: <Mouse Interface> on usbus0
   ums0: 3 buttons and [Z] coordinates ID=0
   Trying to mount root from nfs: []... Trying to mount root from nfs:
   []...
   NFS ROOT: 192.168.0.10:/home/elars/dst NFS ROOT:
   192.168.0.10:/home/elars/dst
   Interface igb0 IP-Address 192.168.11.1 Broadcast 192.168.255.255 igb0:
   link state changed to UP
   Setting hostuuid: 00000000-0000-0000-0000-0025909b732e.
   Setting hostid: 0xe85d6456.
   No suitable dump device was found.
   swapon: /dev/da1s1a: No such file or directory
   Starting file system checks:
   Mounting local file systems:mount_msdosfs: /dev/da0s1: No such file or
   directory
   .
   Feeding entropy:.
   ifconfig: SIOCIFCREATE2: Invalid argument
   Starting dhclient.
   DHCPDISCOVER on igb0 to 255.255.255.255 port 67 interval 7
   DHCPOFFER from 192.168.0.2
   unknown dhcp option value 0xd0
   unknown dhcp option value 0xd1
   unknown dhcp option value 0xd2
   unknown dhcp option value 0xd3
   DHCPREQUEST on igb0 to 255.255.255.255 port 67
   DHCPACK from 192.168.0.2
   unknown dhcp option value 0xd0
   unknown dhcp option value 0xd1
   unknown dhcp option value 0xd2
   unknown dhcp option value 0xd3
   bound to 192.168.11.1 -- renewal in 2147483647 seconds.
   Starting Network: lo0 igb0 igb1 ix0 ix1.
   lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
   options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
   inet6 ::1 prefixlen 128
   inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
   inet 127.0.0.1 netmask 0xff000000
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   groups: lo
   igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
   1500
   options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS
   UM,TSO4,TSO6,VLAN_HWTSO>
   ether 00:25:90:9b:73:2e
   inet6 fe80::225:90ff:fe9b:732e%igb0 prefixlen 64 scopeid 0x1
   inet 192.168.11.1 netmask 0xffff0000 broadcast 192.168.255.255
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect (1000baseT <full-duplex>)
   status: active
   igb1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS
   UM,TSO4,TSO6,VLAN_HWTSO>
   ether 00:25:90:9b:73:2f
   inet6 fe80::225:90ff:fe9b:732f%igb1 prefixlen 64 scopeid 0x2
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect
   status: no carrier
   ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=8407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWC
   SUM,TSO4,TSO6,LRO,VLAN_HWTSO>
   ether 90:e2:ba:77:d4:9c
   inet6 fe80::92e2:baff:fe77:d49c%ix0 prefixlen 64 scopeid 0x3
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect
   status: no carrier
   ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=8407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWC
   SUM,TSO4,TSO6,LRO,VLAN_HWTSO>
   ether 90:e2:ba:77:d4:9d
   inet6 fe80::92e2:baff:fe77:d49d%ix1 prefixlen 64 scopeid 0x4
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect
   status: no carrier
   add net fe80::: gateway ::1
   add net ff02::: gateway ::1
   add net ::ffff:0.0.0.0: gateway ::1
   add net ::0.0.0.0: gateway ::1
   Generating host.conf.
   Starting rtsold.
   Starting devd.
   Starting Network: igb1.
   igb1: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCS
   UM,TSO4,TSO6,VLAN_HWTSO>
   ether 00:25:90:9b:73:2f
   inet6 fe80::225:90ff:fe9b:732f%igb1 prefixlen 64 scopeid 0x2
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect
   status: no carrier
   Starting Network: ix0.
   ix0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=8407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWC
   SUM,TSO4,TSO6,LRO,VLAN_HWTSO>
   ether 90:e2:ba:77:d4:9c
   inet6 fe80::92e2:baff:fe77:d49c%ix0 prefixlen 64 scopeid 0x3
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect
   status: no carrier
   Starting Network: ix1.
   ix1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
   options=8407bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWC
   SUM,TSO4,TSO6,LRO,VLAN_HWTSO>
   ether 90:e2:ba:77:d4:9d
   inet6 fe80::92e2:baff:fe77:d49d%ix1 prefixlen 64 scopeid 0x4
   nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
   media: Ethernet autoselect
   status: no carrier
   Starting ums0 moused.
   Mounting NFS file systems:.
   ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib
   /usr/local/lib/R/lib /usr/local/lib/gcc47 /usr/local/lib/gcc48
   32-bit compatibility ldconfig path: /usr/lib32
   Creating and/or trimming log files.
   Starting syslogd.
   NFS access cache time=60
   Setting NIS domain: netapp.com.
   Starting rpcbind.
   Starting ypbind.
   Starting casperd.
   Clearing /tmp (X related).
   Starting nfsuserd.
   Starting statd.
   Starting lockd.
   Cleaning xenstore database.
   Starting xenservices: xenstored, xenconsoled.May 18 16:33:43 phobos2
   xenstored: TDB: tdb_open_ex: could not open file
   /var/lib/xenstored/tdb: No such file or directory
   May 18 16:33:43 phobos2 xenstored: Checking store ...
   May 18 16:33:43 phobos2 xenstored: Checking store complete.
   WARNING: Failed to open connection to gnttab
   xenbusb_front0: <Xen Frontend Devices> on xenstore0
   xenbusb_back0: <Xen Backend Devices> on xenstore0
   xenballoon0: <Xen Balloon Device> on xenstore0
   xctrl0: <Xen Control Device> on xenstore0
   xs_dev0: <Xenstore user-space device> on xenstore0
   Setting domain 0 name, domid and JSON config...
   Done setting up Dom0
   Starting local daemons:.
   Mounting late file systems:.
   Starting nscd.
   Starting ntpd.
   Starting powerd.
   powerd: no cpufreq(4) support -- aborting: No such file or directory
   /etc/rc: WARNING: failed to start powerd
   Configuring vt: blanktime.
   swapon: /dev/da1s1a: No such file or directory
   Performing sanity check on sshd configuration.
   Starting sshd.
   sysctl: unknown oid 'hw.isci.force_legacy_interrupts' at line 21: No
   such file or directory
   Starting inetd.
   Mon May 18 16:33:44 CEST 2015
   FreeBSD/amd64 (phobos2) (xc0)
   login:
    End of changes. 23 change blocks.
   89 lines changed or deleted 89 lines changed or added
   This html diff was produced by rfcdiff 1.42. The latest version is
   available from [1]http://tools.ietf.org/tools/rfcdiff/

References

   1. http://www.tools.ietf.org/tools/rfcdiff/

--Apple-Mail=_9CD72BB6-A8F9-4869-837F-5D7081638B6C
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;
	charset=us-ascii




--Apple-Mail=_9CD72BB6-A8F9-4869-837F-5D7081638B6C--

--Apple-Mail=_A6A99AD4-B41A-4400-977E-338DCFC75ABA
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment; filename="signature.asc"
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: Message signed with OpenPGP using GPGMail

-----BEGIN PGP SIGNATURE-----

iEYEARECAAYFAlVZ+mcACgkQIWcjmsUTWRpEHwCeJhFgoH/CDz8jPsNXzcNnTkkt
BQEAoNNtWDG1rAAp0Kg04jbKPcZd8fDz
=LCiT
-----END PGP SIGNATURE-----

--Apple-Mail=_A6A99AD4-B41A-4400-977E-338DCFC75ABA--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?FF5BDAA5-D9C0-4958-B900-1D141194EE30>