From owner-freebsd-alpha Wed Sep 6 15:36:16 2000 Delivered-To: freebsd-alpha@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id AD75D37B423 for ; Wed, 6 Sep 2000 15:36:07 -0700 (PDT) Received: from beppo.feral.com (beppo [192.67.166.79]) by feral.com (8.9.3/8.9.3) with ESMTP id PAA25662 for ; Wed, 6 Sep 2000 15:36:07 -0700 Date: Wed, 6 Sep 2000 15:35:54 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: alpha@FreeBSD.ORG Subject: FWIW, more crosschecks on latest checkin In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org my Alphastation 500, which, ahem, is quite close to my PC164.... stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 7 6 done Uptime: 19d20h22m44s Rebooting... halted CPU 0 halt code = 5 HALT instruction executed PC = fffffc00005c7650 CPU 0 booting (boot dka0.0.0.9.0 -flags a) block 0 of dka0.0.0.9.0 is a valid boot block reading 15 blocks from dka0.0.0.9.0 bootstrap code read in base = 13c000, image_start = 0, image_bytes = 1e00 initializing HWRPB at 2000 initializing page table at 12e000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Loading /boot/loader Console: SRM firmware console VMS PAL rev: 0x1000000010112 OSF PAL rev: 0x1000000020115 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM disk boot, Revision 0.3 (mjacob@mathom.nas.nasa.gov, Thu Aug 10 07:01:30 PDT 2000) Memory: 262144 k Loading /boot/defaults/loader.conf kernel data=0x3bea10+0x392f2 syms=[0x8+0x4b6600x8+0x37eba] modules/ispfw.ko text=0x4f5c8 data=0x268 syms=[0x8+0x630+0x8+0x2ee] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Booting [kernel]... Entering kernel at 0xfffffc000032e280... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. Setting fdc 0 at to isa (string) Setting fdc 0 port to 1008 (int) Setting fdc 0 irq to 6 (int) Setting fdc 0 drq to 2 (int) Setting fd 0 at to fdc0 (string) Setting fd 0 drive to 0 (int) Setting atkbdc 0 at to isa (string) Setting atkbdc 0 port to 96 (int) Setting atkbd 0 at to atkbdc (string) Setting atkbd 0 irq to 1 (int) Setting psm 0 at to atkbdc (string) Setting psm 0 irq to 12 (int) Setting vga 0 at to isa (string) Setting sc 0 at to isa (string) Setting mcclock 0 at to isa (string) Setting mcclock 0 port to 112 (int) Setting sio 0 at to isa (string) Setting sio 0 port to 1016 (int) Setting sio 0 irq to 4 (int) Setting sio 1 at to isa (string) Setting sio 1 port to 760 (int) Setting sio 1 irq to 3 (int) Setting sio 1 flags to 80 (int) Setting ppc 0 at to isa (string) Setting ppc 0 irq to 7 (int) Setting atkbd 0 at to atkbdc (string) Setting atkbd 0 irq to 1 (int) Setting atkbdc 0 at to isa (string) Setting atkbdc 0 port to 96 (int) Setting fd 0 at to fdc0 (string) Setting fd 0 drive to 0 (int) Setting fdc 0 at to isa (string) Setting fdc 0 drq to 2 (int) Setting fdc 0 irq to 6 (int) Setting fdc 0 port to 1008 (int) Setting mcclock 0 at to isa (string) Setting mcclock 0 port to 112 (int) Setting ppc 0 at to isa (string) Setting ppc 0 irq to 7 (int) Setting psm 0 at to atkbdc (string) Setting psm 0 irq to 12 (int) Setting sc 0 at to isa (string) Setting sio 0 at to isa (string) Setting sio 0 irq to 4 (int) Setting sio 0 port to 1016 (int) Setting sio 1 at to isa (string) Setting sio 1 flags to 80 (int) Setting sio 1 irq to 3 (int) Setting sio 1 port to 760 (int) Setting vga 0 at to isa (string) FreeBSD 5.0-CURRENT #0: Thu Aug 17 18:49:46 PDT 2000 mjacob@mathom.nas.nasa.gov:/usr/src/sys/compile/GENERIC AlphaStation 500 or 600 (KN20AA) Digital AlphaStation 500/500, 500MHz 8192 byte page size, 1 processor. CPU: EV56 (21164A) major=7 minor=0 extensions=0x1 OSF PAL rev: 0x1000000020115 real memory = 266182656 (259944K bytes) Physical memory chunk(s): 0x007fc000 - 0x0ff0dfff, 259072000 bytes (31625 pages) avail memory = 251666432 (245768K bytes) Preloaded elf kernel "kernel" at 0xfffffc00007e0000. Preloaded elf module "ispfw.ko" at 0xfffffc00007e00c0. mem: nulldev: random: Creating DISK md0 md0: Malloc disk cia0: ALCOR/ALCOR2, pass 3 cia0: extended capabilities: 21 pcib0: <2117x PCI host bus adapter> on cia0 found-> vendor=0x1011, dev=0x0002, revid=0x26 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=13 map[10]: type 4, range 32, base 00010180, size 7, enabled map[14]: type 1, range 32, base 82051080, size 7, enabled found-> vendor=0x1011, dev=0x0009, revid=0x20 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=16 map[10]: type 4, range 32, base 00010100, size 7, enabled map[14]: type 1, range 32, base 82051000, size 7, enabled found-> vendor=0x1077, dev=0x1020, revid=0x02 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 4, range 32, base 00010000, size 8, enabled map[14]: type 1, range 32, base 82050000, size 12, enabled found-> vendor=0x8086, dev=0x0482, revid=0x15 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 pci0: on pcib0 de0: port 0x10180-0x101ff mem 0x82051080-0x820510ff irq 13 at device 6.0 on pci0 de0: interrupting at CIA irq 13 de0: DEC 21040 [10Mb/s] pass 2.6 de0: address 00:00:f8:25:34:a6 bpf: de0 attached de1: port 0x10100-0x1017f mem 0x82051000-0x8205107f irq 16 at device 8.0 on pci0 de1: interrupting at CIA irq 16 de1: 21140A [10-100Mb/s] pass 2.0 de1: address 00:c0:f0:16:28:1f bpf: de1 attached Qlogic ISP Driver, FreeBSD Version 5.3, Core Version 2.0 isp0: port 0x10000-0x100ff mem 0x82050000-0x82050fff irq 12 at device 9.0 on pci0 isp0: using Memory space register mapping isp0: interrupting at CIA irq 12 isp0: Board Revision 1020A, loaded F/W Revision 4.65.0 isp0: Last F/W revision was 5.1.1 isab0: at device 10.0 on pci0 isa0: on isab0 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc-: sc0 exists, using next available unit number vga-: vga0 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd0: irq 1 on atkbdc0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: interrupting at ISA irq 1 psm0: current command byte:0061 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. vga0: failed to probe on isa0 sc0: no video adapter is found. sc0: failed to probe on isa0 mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 500001450 Hz (firmware 500000000 Hz) sio0: irq maps: 0x40 0x51 0x41 0x41 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0 ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: cannot reserve interrupt, failed. lpt0: on ppbus0 lpt0: Polled port ppi0: on ppbus0 ppc0: interrupting at ISA irq 7 sc1: no video adapter is found. sc1: failed to probe on isa0 vga1: failed to probe on isa0 isa_probe_children: probing PnP devices Timecounter "alpha" frequency 500001450 Hz bpf: ppp0 attached bpf: faith0 attached bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached Waiting 15 seconds for SCSI devices to settle de1: enabling 10baseT port de0: autosense failed: cable problem? isp0: 0.4 get user period 0x19 offset 0xc flags 0xfd00 isp0: 0.4 get current period 0x19 offset 0x0 flags 0xc5c0 isp0: 0.4 set current period 0x19 offset 0xc flags 0xd500 isp0: 0.0 get user period 0x19 offset 0xc flags 0xfd00 isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc5c0 isp0: 0.0 set current period 0x19 offset 0xc flags 0xfd00 Creating DISK cd0 Creating DISK da0 pass0 at isp0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number JDF492370Q9UPJ isp0: 0.0 get current period 0x19 offset 0xc flags 0xfd00 pass0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled pass1 at isp0 bus 0 target 4 lun 0 pass1: Removable CD-ROM SCSI-2 device isp0: 0.4 get current period 0x19 offset 0x8 flags 0xd500 pass1: 10.000MB/s transfers (10.000MHz, offset 8) da0 at isp0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number JDF492370Q9UPJ isp0: 0.0 get current period 0x19 offset 0xc flags 0xfd00 da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) (cd0:isp0:0:4:0): got CAM status 0x50 (cd0:isp0:0:4:0): fatal error, failed to attach to device (cd0:isp0:0:4:0): lost device (cd0:isp0:0:4:0): removing device entry Mounting root from ufs:/dev/da0a da0: invalid primary partition table: no magic start_init: trying /sbin/init swapon: adding /dev/da0b as swap device Automatic boot in progress... /dev/da0a: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/da0a: clean, 1445673 free (45481 frags, 175024 blocks, 1.2% fragmentation) Doing initial network setup: hostname domain. de1: flags=8843 mtu 1500 inet 129.99.50.36 netmask 0xffffff00 broadcast 129.99.50.255 inet6 fe80::2c0:f0ff:fe16:281f%de1 prefixlen 64 tentative scopeid 0x2 ether 00:c0:f0:16:28:1f media: autoselect (10baseT/UTP) status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP lo0: flags=8049 mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 add net default: gateway 129.99.50.254 Additional routing options: tcp extensions=NO TCP keepalive=YES. routing daemons:. mount: /home/ncvs: No such file or directory Mounting NFS file systems. additional daemons: syslogdSep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055 Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000 Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055 Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000 Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055 Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000 Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055 Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000 Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055 Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000 Sep 6 15:24:58 mathom /kernel: kbdc: DIAGNOSE status:0055 Sep 6 15:24:58 mathom /kernel: kbdc: TEST_KBD_PORT status:0000 Sep 6 15:24:58 mathom /kernel: kbdc: TEST_AUX_PORT status:0000 Sep 6 15:24:59 mathom /kernel: kbdc: RESET_AUX return code:00fe Sep 6 15:24:59 mathom last message repeated 2 times Sep 6 15:24:59 mathom /kernel: kbdc: DIAGNOSE status:0055 Sep 6 15:24:59 mathom /kernel: kbdc: TEST_KBD_PORT status:0000 . Doing additional network setup: ntpdate ntpd portmap ypbind. Starting final network daemons:. setting ELF ldconfig path: /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib starting standard daemons: inetd cron. Initial rc.alpha initialization:. rc.alpha configuring syscons:. Local package initialization: Networker sshd. Additional TCP options:. Wed Sep 6 15:25:50 PDT 2000 FreeBSD/alpha (mathom.nas.nasa.gov) (console) login: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message