Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 19 Aug 2012 22:58:36 -0400
From:      "Brian J. McGovern" <mcgovern@beta.com>
To:        freebsd-arm@freebsd.org, hrs@freebsd.org
Subject:   Re: freebsd-arm Digest, Vol 329, Issue 5
Message-ID:  <1345431516.1608.6.camel@fbsd-workstation.beta.com>
In-Reply-To: <20120803120026.2196B106568F@hub.freebsd.org>
References:  <20120803120026.2196B106568F@hub.freebsd.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 2012-08-03 at 12:00 +0000, freebsd-arm-request@freebsd.org
wrote:
> Date: Fri, 3 Aug 2012 05:58:53 GMT
> From: hrs@FreeBSD.org
> Subject: Re: arm/156814: OpenRD Ultimate does not boot on DB-88F6XXX
>         or      SHEEVAPLUG kernel configurations
> To: hrs@FreeBSD.org, freebsd-arm@FreeBSD.org, hrs@FreeBSD.org
> Message-ID: <201208030558.q735wrqE082699@freefall.freebsd.org>
> 
> Synopsis: OpenRD Ultimate does not boot on DB-88F6XXX or SHEEVAPLUG
> kernel configurations
> 
> Responsible-Changed-From-To: freebsd-arm->hrs
> Responsible-Changed-By: hrs
> Responsible-Changed-When: Fri Aug 3 05:58:30 UTC 2012
> Responsible-Changed-Why: 
> I'll take this.
> 
> http://www.freebsd.org/cgi/query-pr.cgi?pr=156814
> 
> 

I have a patch set working based on FreeBSD 9.0 for the OpenRD Ultimate
derived from the patch set in the bug (with additional contributions and
changes). It boots the kernel from NAND, and I have a mostly working
driver for the SD card. There appears to be an initialization problem in
the code - presently, I have about a half dozen lines #ifdef'ed so that
it will work with an already installed SD (it will panic if its removed
and reinserted), or it will work if you insert the SD card after boot
(you can insert and remove to your heart's content, but if you boot the
box with an SD card installed, it will panic).

Late last week, I had started the process of building some diffs from my
code base to move it forward to 9.1 or -current.

If this would be helpful to you in any way, let me know. Similarly, if
you need any testing...

  -Brian




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1345431516.1608.6.camel>