Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 26 Jun 2000 10:06:03 -0400
From:      John Holland <john@zoner.org>
To:        freebsd-stable@FreeBSD.ORG
Subject:   4.0-Stable boot hangs
Message-ID:  <4.3.1.0.20000626095103.00ac5a70@pop.mindspring.com>

next in thread | raw e-mail | index | archive | help
Sunday, I did a fresh cvsup of RELENG_4, made and installed world and a new 
kernel.  The reboot hangs at the point the old kernel gets to the two ed* 
devices (old Thomas Conrad NE2000 NICs).  Before this, the system was 
working perfectly.

Did something break in the ed driver in the two months since I last built 
the system from source?



Here is the dmesg from the OLD, functioning kernel.

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #1: Fri Jun  9 13:16:20 EDT 2000
     toor@pippin.kazoocmh.org:/usr/src/sys/compile/PIPPIN
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 132632297 Hz
CPU: Pentium/P54C (132.63-MHz 586-class CPU)
   Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
   Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 33554432 (32768K bytes)
avail memory = 29941760 (29240K bytes)
Preloaded elf kernel "kernel.orig" at 0xc02d3000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371FB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX ATA controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <ATI Mach64-CT graphics accelerator> at 15.0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ed0 at port 0x320-0x33f iomem 0xd8000 irq 5 on isa0
ed0: address 00:80:13:c5:8c:25, type NE2000 (16 bit)
ed1 at port 0x300-0x31f iomem 0xd8000 irq 3 on isa0
ed1: address 00:80:13:49:6c:e2, type NE2000 (16 bit)
device_probe_and_attach: ex0 attach returned -1
IP Filter: v3.4.4 initialized.  Default = block all, Logging = enabled
ad0: 1033MB <WDC AC21000H> [2100/16/63] at ata0-master using WDMA2
ad1: 1549MB <WDC AC31600H> [3148/16/63] at ata0-slave using WDMA2
acd0: CDROM <TOSHIBA CD-ROM XM-5602B> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s1a



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4.3.1.0.20000626095103.00ac5a70>