Date: Thu, 20 Jun 2002 17:45:35 +0200 From: Thomas Nystrom <thn@saeab.se> To: sharity <sharity@seed.net.tw> Cc: freebsd-bugs@freebsd.org Subject: Re: kern/39423: vr0 watchdog timeout Message-ID: <3D11F89F.70E58CDB@saeab.se> References: <3D11CE8D.2377B7CE@saeab.se> <000401c2186a$1022eec0$1d1ba8c0@dinocake>
next in thread | previous in thread | raw e-mail | index | archive | help
Well, I can't answer what it detected as media option for me... I didn't checked that. What I looked for was if I got any timeouts when I used FTP to transmit a large file (around 80 MB). With the VIA-version of the driver I got timeouts and the board hanged. I could get it up again after I had aborted the FTP transfer and performed several ifconfig fet0 up/down's. With my earlier patches I can transmit the 80MB file without problem. I know for sure that the vr-driver detects it as 100 MB/full duplex because I have tried to play around with that setting earlier. /thn sharity wrote: > > hmm... > > Have you tried to set the mediaopt to full-duplex? > This driver seems unable to detect the media type correctly. > > # dmesg | grep fet > fet0: <VIA VT86C100A Fast Ethernet Adapter > port > 0xe800-0xe87f mem 0xed026000-0xed02607f irq 15 at device 12.0 on pci0 > fet0: Ethernet address: 00:30:43:00:0d:97 > fet0: if_fet.c: v2.04 05/17/2001 > miibus1: <MII bus> on fet0 > Analyzing Media type of fet0, this will take several seconds........OK > fet0: Linespeed=100Mb,Halfduplex > ^^^^^^^^^^ > > ----- Original Message ----- > From: "Thomas Nystrom" <thn@saeab.se> > To: <freebsd-gnats-submit@FreeBSD.org>; <sharity@seed.net.tw> > Sent: Thursday, June 20, 2002 8:46 PM > Subject: Re: kern/39423: vr0 watchdog timeout > > > I have tried that driver but it didn't solved my problem that I reported > > earlier (in kern/37929: hang of vr interface running at 100 MBit/full > > duples). In fact, the timeouts started to appear again with the VIA made > > driver. > > BTW: The dates of the VIA driver is about one year old... > > The patch I supplied in 37929 still seems to be the best solution for > > me. > > /thn To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D11F89F.70E58CDB>