Date: Mon, 12 May 2008 13:47:57 -0700
From: "Steve Franks" <stevefranks@ieee.org>
To: "Rui Paulo" <rpaulo@freebsd.org>
Cc: freebsd-acpi@freebsd.org
Subject: Re: Biostar 945GC-M7 TE - won't suspend ("oper not supported"), even though sysctl's say S1 S3 supported
Message-ID: <539c60b90805121347l4835d558w95666aeb10755600@mail.gmail.com>
In-Reply-To: <481A3333.6070407@FreeBSD.org>
References: <539c60b90804301105x7658d95eo6bb265420f85140c@mail.gmail.com> <4819BEAE.2060307@FreeBSD.org> <539c60b90805011339l2d3c300cl6a5ea3af76f97539@mail.gmail.com> <539c60b90805011341i22d9f85ci7e6d20f925720698@mail.gmail.com> <481A3333.6070407@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, May 1, 2008 at 2:16 PM, Rui Paulo <rpaulo@freebsd.org> wrote:
> Steve Franks wrote:
>
> > Ok, I admit, I had a ucom plugged in in the dmesg I sent, but I assure
> > you, that isn't the issue. I even just double-checked.
> >
>
> I think your best bet is boot with ACPI debug turned on.
> Try adding:
> options ACPI_DEBUG
> to your kernel config file, and:
> debug.acpi.layer=ACPI_ALL_DRIVERS
> debug.acpi.level=ACPI_LV_ALL_EXCEPTIONS
>
> If that doesn't show anything particularly interesting, try increasing the
> debugging level.
> For more information, see the acpi(4) man page.
>
> Good luck,
> --
> Rui Paulo
>
Finally got around to rebuilding my kernel with options acpi debug.
Not everyone recognizes blah.foo.bar=somestring as an input to sysctl,
and the acpi manpage is less than explicit about it also, by the way,
saying only "some of these things have equivalent sysctl's".
Not having much luck, other than a shiny new kernel, though:
Steve
[steve@dystant /usr/obj/usr/src/sys/DYSTANT]$ sudo sysctl
debug.acpi.layer=ACPI_ALL_DRIVERS
debug.acpi.layer: NONE -> ACPI_AC_ADAPTER ACPI_BATTERY ACPI_BUS
ACPI_BUTTON ACPI_EC ACPI_FAN ACPI_POWERRES ACPI_PROCESSOR ACPI_THERMAL
ACPI_TIMER ACPI_ALL_DRIVERS
[steve@dystant /usr/obj/usr/src/sys/DYSTANT]$ sudo sysctl
debug.acpi.level=ACPI_LV_ALL_EXCEPTIONS
debug.acpi.level: NONE -> ACPI_LV_ERROR ACPI_LV_WARN ACPI_LV_INIT
ACPI_LV_DEBUG_OBJECT ACPI_LV_INFO ACPI_LV_ALL_EXCEPTIONS
[steve@dystant /usr/obj/usr/src/sys/DYSTANT]$ sudo sysctl hw.acpi.verbose=1
hw.acpi.verbose: 0 -> 1
[steve@dystant /usr/obj/usr/src/sys/DYSTANT]$ sudo acpiconf -s3
acpiconf: request sleep type (3) failed: Operation not supported
[steve@dystant /usr/obj/usr/src/sys/DYSTANT]$
[steve@dystant /usr/obj/usr/src/sys/DYSTANT]$ dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE-p1 #0: Mon May 12 11:27:26 MST 2008
root@dystant.franks-development.dyndns.biz:/usr/obj/usr/src/sys/DYSTANT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) CPU 430 @ 1.80GHz (1799.99-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10661 Stepping = 1
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xe31d<SSE3,RSVD2,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
usable memory = 1051373568 (1002 MB)
avail memory = 1012994048 (966 MB)
ACPI APIC Table: <IntelR AWRDACPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
kqemu version 0x00010300
kqemu: KQEMU installed, max_locked_mem=513364kB.
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (May 12 2008 11:27:11)
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f6f0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem
0xfde80000-0xfdefffff,0xc0000000-0xcfffffff,0xfdf00000-0xfdf3ffff irq
16 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pcm0: <Intel 82801G High Definition Audio Controller> mem
0xfdff8000-0xfdffbfff irq 16 at device 27.0 on pci0
pcm0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network, ethernet> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0xfe00-0xfe1f irq 23 at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
uhci0: LegSup = 0x003a
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 19 at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
uhci1: LegSup = 0x0010
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 18 at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
uhci2: LegSup = 0x0010
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 16 at
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
uhci3: LegSup = 0x0010
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xde00-0xdeff mem
0xfdaff000-0xfdaff0ff irq 16 at device 2.0 on pci3
vr0: Quirks: 0x0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: using obsoleted if_watchdog interface
vr0: Ethernet address: 00:1b:11:b0:ec:1d
vr0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH7 SATA300 controller> port
0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f
mem 0xfdffe000-0xfdffe3ff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00,
addr 2> on uhub1
ums0: 4 buttons and Z dir.
ugen0: <Olimex Olimex OpenOCD JTAG, class 0/0, rev 2.00/5.00, addr 3> on uhub1
ugen1: <Silicon Labs CP2103 USB to UART Bridge Controller, class 0/0,
rev 1.10/1.00, addr 2> on uhub2
Timecounter "TSC" frequency 1799986311 Hz quality 800
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: DVDR <NEC DVD RW ND-3500AG/2.16> at ata0-master UDMA33
ad4: 152627MB <Seagate ST3160827AS 3.42> at ata2-master SATA150
pcm0: <HDA Codec: Realtek (Unknown)>
pcm0: <HDA Driver Revision: 20071129_0050>
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
tap0: Ethernet address: 00:bd:bc:16:00:00
tap1: Ethernet address: 00:bd:cd:16:00:01
tap2: Ethernet address: 00:bd:d0:16:00:02
tap3: Ethernet address: 00:bd:d4:16:00:03
tap4: Ethernet address: 00:bd:d7:16:00:04
tap5: Ethernet address: 00:bd:db:16:00:05
tap6: Ethernet address: 00:bd:e0:16:00:06
tap7: Ethernet address: 00:bd:e5:16:00:07
tap8: Ethernet address: 00:bd:e9:16:00:08
tap9: Ethernet address: 00:bd:ef:16:00:09
drm0: <Intel i945G> on vgapci0
info: [drm] AGP at 0xc0000000 256MB
info: [drm] Initialized i915 1.5.0 20060119
drm0: [ITHREAD]
ACPI set debug layer 'ACPI_ALL_DRIVERS'
ACPI set debug layer 'ACPI_ALL_DRIVERS' level 'ACPI_LV_ALL_EXCEPTIONS'
[steve@dystant /usr/obj/usr/src/sys/DYSTANT]$
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?539c60b90805121347l4835d558w95666aeb10755600>