Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 12 Apr 2001 14:53:27 -0400
From:      Jeremy Hopkins <jhopkins@rtci.com>
To:        jl@burghcom.com, freebsd-stable@freebsd.org
Subject:   Re: Problems with 3c905B and 4.3-RC
Message-ID:  <3AD5F9A7.2B305998@rtci.com>
References:  <3AD4CBC3.F3E79AFC@rtci.com> <01041208131800.29806@merlin> <045c01c0c34b$588d6980$931576d8@inethouston.net>

next in thread | previous in thread | raw e-mail | index | archive | help
Correct. the pnp OS setting solved my issue.
But to answer the question.  Yes, miibus was in my kernel.  


"David W. Chapman Jr." wrote:
> 
> No, he solved the problem already by setting pnp OS to off I believe.
> 
> ----- Original Message -----
> From: "Jeff Love" <jl@burghcom.com>

> > Not sure if this is the problem in your case, but did you include 'device
> > miibus' to your kernel config? This was a fairly recent addition needed
> for
> > 3com nics.

> > >
> > > xl0 shows up in dmesg but I get error messages along with it.
> > >
> > > xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 10 at device 15.0 on pci0
> > > xl0: couldn't map ports/memory
> > > device_probe_and_attach: xl0 attach returned 6

> > > below is copy of full dmesg output-
> > > ------------------------------
> > > Copyright (c) 1992-2001 The FreeBSD Project.
> > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> > >         The Regents of the University of California. All rights
> > > reserved.
> > > FreeBSD 4.3-RC #0: Wed Apr 11 18:50:15 GMT 2001
> > >     root@shadow.ghettoweb.net:/usr/obj/usr/src/sys/GUNSHOT
> > > Timecounter "i8254"  frequency 1193182 Hz
> > > CPU: Pentium III/Pentium III Xeon/Celeron (497.84-MHz 686-class CPU)
> > >   Origin = "GenuineIntel"  Id = 0x673  Stepping = 3
> > >
> > >
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
> PAT,PSE36,MMX,FXSR,SSE>
> > > real memory  = 134217728 (131072K bytes)
> > > avail memory = 126545920 (123580K bytes)
> > > Preloaded elf kernel "kernel" at 0xc03e1000.
> > > Pentium Pro MTRR support enabled
> > > md0: Malloc disk
> > > npx0: <math processor> on motherboard
> > > npx0: INT 16 interface
> > > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
> > > pci0: <PCI bus> on pcib0
> > > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on
> > > pci0
> > > pci1: <PCI bus> on pcib1
> > > pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 11
> > > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
> > > isa0: <ISA bus> on isab0
> > > atapci0: <Intel PIIX4 ATA33 controller> port 0x1000-0x100f at device 7.1
> > > on pci0
> > > ata0: at 0x1f0 irq 14 on atapci0
> > > ata1: at 0x170 irq 15 on atapci0
> > > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1020-0x103f irq
> > > 9 at device 7.2 on pci0
> > > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> > > usb0: USB revision 1.0
> > > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > > uhub0: 2 ports with 2 removable, self powered
> > > chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at
> > > device 7.3 on pci0
> > > xl0: <3Com 3c905B-TX Fast Etherlink XL> irq 10 at device 15.0 on pci0
> > > xl0: couldn't map ports/memory
> > > device_probe_and_attach: xl0 attach returned 6
> > > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> > > isa0
> > > fdc0: FIFO enabled, 8 bytes threshold
> > > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> > > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> > > kbd0 at atkbd0
> > > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > > psm0: model IntelliMouse, device ID 3
> > > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
> > > isa0
> > > sc0: <System console> at flags 0x100 on isa0
> > > sc0: VGA <16 virtual consoles, flags=0x300>
> > > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> > > sio0: type 16550A
> > > sio1: configured irq 3 not in bitmap of probed irqs 0
> > > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> > > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> > > ppc0: FIFO with 16/16/8 bytes threshold
> > > lpt0: <Printer> on ppbus0
> > > lpt0: Interrupt-driven port
> > > ppi0: <Parallel I/O> on ppbus0
> > > IPsec: Initialized Security Association Processing.
> > > ad0: 9787MB <WDC WD102AA> [19885/16/63] at ata0-master UDMA33
> > > ad1: 9787MB <WDC WD102AA> [19885/16/63] at ata0-slave UDMA33
> > > acd0: CDROM <CRD-8483B> at ata1-master using PIO4
> > > afd0: 96MB <IOMEGA ZIP 100 ATAPI> [96/64/32] at ata1-slave using PIO3
> > > Mounting root from ufs:/dev/ad0s1a
> > >

-- 
Jeremy Hopkins
Systems Administrator
www.icc.net www.rtci.com
For those who like this sort of thing, this is the sort of thing they
like.  -- Abraham Lincoln

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3AD5F9A7.2B305998>