Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 02 Aug 2001 03:38:36 +0400
From:      Andrey Lykhin <Andrey.Lykhin@p31.f68.n5090.z2.fidonet.org>
To:        stable@freebsd.org
Subject:   bugs
Message-ID:  <996727130@p31.f68.n5090.z2.FidoNet.ftn>

next in thread | raw e-mail | index | archive | help

FreeBSD 4.3-RELEASE is not established with compact disc on the computer:

CPU: Intel pentium 166 mmx;
MotherBoard: Acorp 5vx32, i430vx chipset;
HDD: IDE Fujitsu MPD3064AT 6.48GB UDMA33;
CD-ROM: IDE Samsung 8x SCR-830.

At installation fdisk can not keep the made changes with a disk, press "w" - to
keep the made changes and sysinstall leaves on 11 signal, too most occurs and
by pressing a key "u".
FreeBSD 2.2.8-RELEASE is established without problems.

dmesg:
=== Start Windows Clipboard ===
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #1: Sat Apr 21 11:15:36 GMT 2001
    jkh@narf.osd.bsdi.com:/usr/src/sys/compile/BOOTMFS
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 166586981 Hz
CPU: Pentium/P55C (166.59-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x543  Stepping = 3
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 33554432 (32768K bytes)
config> intro
[...]
avail memory = 26206208 (25592K bytes)
Preloaded elf kernel "kernel" at 0xc0672000.
Intel Pentium detected, installing workaround for F00F bug
md1: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <S3 ViRGE DX/GX graphics accelerator> at 10.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 6187MB <FUJITSU MPD3064AT> [13410/15/63] at ata0-master WDMA2
acd0: CDROM <CS-R38 0> at ata0-slave using PIO3
Mounting root from ufs:/dev/md0c
ad0s2: raw partition size != slice size
ad0s2: start 4192965, end 10554704, size 6361740
ad0s2c: start 4192965, end 12659219, size 8466255
ad0s2: truncating raw partition
ad0s2: rejecting partition in BSD label: it isn't entirely within the slice
ad0s2: start 4192965, end 10554704, size 6361740
ad0s2f: start 4470885, end 12659219, size 8188335
ad0s2: raw partition size != slice size
ad0s2: start 4192965, end 10554704, size 6361740
ad0s2c: start 4192965, end 12659219, size 8466255
ad0s2: truncating raw partition
ad0s2: rejecting partition in BSD label: it isn't entirely within the slice
ad0s2: start 4192965, end 10554704, size 6361740
ad0s2f: start 4470885, end 12659219, size 8188335
[...]
=== End Windows Clipboard ===


It would be desirable to decide(solve) this problem. A thank.



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?996727130>