Date: Thu, 17 Jan 2002 06:35:36 -0500 From: Chris Demers <admin@govital.net> To: smp@freebsd.org Subject: problem with smp on intel motherboard Message-ID: <3C46B708.D5B64975@govital.net>
next in thread | raw e-mail | index | archive | help
Greetings, I have been having no problems with the SMP kernel configuration just up to a couple days ago when I updated one of my last multi processor systems. I have two other systems and have no problems with them they are running superdot and asus motherboards and everything works fine. I just did an update to 4.5-RC Tues Jan 15, 2002 and have completely lost SMP on an intel motherboard. I have tried to cvsup from source now about three times in the last two weeks with the same results on this same board. It worked fine before when I was running 4.4-stable from about two months ago. The kernel sees that it's running on a SMP board but does not launch the send processor. Any help or suggestions would be appreciated. I have double checked my kernel configuration and everything is right. I have two other machines I also have running that I also updated to 4.5-RC in the last week and they are fine. Here are the log entries and mptable data: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-RC #0: Tue Jan 15 22:52:23 EST 2002 admin@xxxxx.xxxxxxxxxxxxxxx.com:/usr/obj/server/src/sys/WEB003 Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (497.44-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x673 Stepping = 3 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 805240832 (786368K bytes) avail memory = 778059776 (759824K bytes) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 1, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc04a1000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 12 entries at 0xc00fdf00 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443GX host to PCI bridge> on motherboard IOAPIC #0 intpin 19 -> irq 2 IOAPIC #0 intpin 21 -> irq 5 pci0: <PCI bus> on pcib0 pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 15.0 on pci1 IOAPIC #0 intpin 23 -> irq 7 pci2: <PCI bus> on pcib3 pcib4: <PCI to PCI bridge (vendor=8086 device=0960)> at device 7.0 on pci2 pci3: <PCI bus> on pcib4 mlx0: <Mylex version 4 RAID interface> mem 0xfc000000-0xfc001fff irq 7 at device 7.1 on pci2 mlx0: DAC960PTL1, 1 channel, firmware 4.08-0-33, 8MB RAM mlxd0: <Mylex System Drive> on mlx0 mlxd0: 26280MB (53821440 sectors) RAID 5 (online) ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2000-0x20ff mem 0xf4100000-0xf4100fff irq 2 at device 12.0 on pci0 aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/255 SCBs ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0x2400-0x24ff mem 0xf4101000-0xf4101fff irq 2 at device 12.1 on pci0 aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/255 SCBs fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2800-0x283f mem 0xf4000000-0xf40fffff,0xf4102000-0xf4102fff irq 5 at device 14.0 on pci0 fxp0: Ethernet address 00:d0:b7:88:72:3f inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82371AB PCI to ISA bridge> at device 18.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x2860-0x286f at device 18.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x2840-0x285f irq 5 at device 18.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered Timecounter "PIIX" frequency 3579545 Hz chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 18.3 on pci0 pci0: <Cirrus Logic GD5480 SVGA controller> at 20.0 pcib1: <Intel 82443GX host to AGP bridge> on motherboard pci4: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xcafff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: parallel port not found. APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Waiting 15 seconds for SCSI devices to settle sa0 at ahc1 bus 0 target 0 lun 0 sa0: <SONY SDT-7000 0192> Removable Sequential Access SCSI-2 device sa0: 10.000MB/s transfers (10.000MHz, offset 15) =============================================================================== MPTable, version 2.0.15 ------------------------------------------------------------------------------- MP Floating Pointer Structure: location: BIOS physical address: 0x000f6ac0 signature: '_MP_' length: 16 bytes version: 1.4 checksum: 0x46 mode: Virtual Wire ------------------------------------------------------------------------------- MP Config Table Header: physical address: 0x0009f160 signature: 'PCMP' base table length: 264 version: 1.4 checksum: 0x35 OEM ID: 'INTEL ' Product ID: 'Lancewood ' OEM table pointer: 0x00000000 OEM table size: 0 entry count: 26 local APIC address: 0xfee00000 extended table length: 164 extended table checksum: 209 ------------------------------------------------------------------------------- MP Config Base Table Entries: -- Processors: APIC ID Version State Family Model Step Flags 0 0x11 BSP, usable 6 7 3 0x383fbff -- Bus: Bus ID Type 0 PCI 1 PCI 2 PCI 3 PCI 4 ISA -- I/O APICs: APIC ID Version State Address 1 0x11 usable 0xfec00000 -- I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 4 0 1 0 INT active-hi edge 4 1 1 1 INT active-hi edge 4 0 1 2 INT active-hi edge 4 3 1 3 INT active-hi edge 4 4 1 4 INT active-hi edge 4 6 1 6 INT active-hi edge 4 8 1 8 INT active-hi edge 4 10 1 10 INT active-hi edge 4 12 1 12 INT active-hi edge 4 13 1 13 INT active-hi edge 4 14 1 14 INT active-hi edge 4 15 1 15 INT active-lo level 0 12:A 1 19 INT active-lo level 0 12:A 1 19 INT active-lo level 0 14:A 1 21 INT active-lo level 0 18:D 1 21 INT active-lo level 2 7:A 1 23 -- Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# ExtINT active-hi edge 4 0 255 0 NMI active-hi edge 0 0:A 255 1 ------------------------------------------------------------------------------- MP Config Extended Table Entries: -- System Address Space bus ID: 0 address type: I/O address address base: 0x0 address range: 0x10000 -- System Address Space bus ID: 0 address type: memory address address base: 0x30000000 address range: 0xc6000000 -- System Address Space bus ID: 0 address type: prefetch address address base: 0xf6000000 address range: 0x6100000 -- System Address Space bus ID: 0 address type: memory address address base: 0xfc100000 address range: 0x2d00000 -- System Address Space bus ID: 0 address type: memory address address base: 0xfef00000 address range: 0x1100000 -- System Address Space bus ID: 0 address type: memory address address base: 0xa0000 address range: 0x20000 -- System Address Space bus ID: 0 address type: memory address address base: 0xcc000 address range: 0x1c000 -- Bus Heirarchy bus ID: 4 bus info: 0x01 parent bus ID: 0 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000000 -- Compatibility Bus Address bus ID: 0 address modifier: add predefined range: 0x00000001 =============================================================================== Chris Demers admin@govital.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C46B708.D5B64975>