Date: Fri, 9 Oct 2015 14:05:54 +0700 From: Eugene Grosbein <eugen@grosbein.net> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: Initial flashing for TPLink TL WDR3600 Message-ID: <56176752.5000803@grosbein.net> In-Reply-To: <CAJ-Vmok70r8nJv2hfGjzL6S-cE-E68bn9866GLzUm1sNDCcwyg@mail.gmail.com> References: <CAJ-VmokxzBVVASyWNQnPTn%2B3GPH6DKSq67S5nHK9tuEydV6oTg@mail.gmail.com> <5614D073.9060706@riseup.net> <5614E36E.6000803@grosbein.net> <CAJ-Vmo=z7PgS8o5Bq-35QSorDPdj=rpac82Lq6a_bekrCkfdVA@mail.gmail.com> <5615F57E.1010405@riseup.net> <5615F697.6080700@riseup.net> <CAJ-VmomPM40c0GS=Dmb-%2B%2BTVHFD195XuW3XYsVpQnxSC=SE_CQ@mail.gmail.com> <5616AA5B.8030609@grosbein.net> <5616B9F0.3030002@grosbein.net> <CAJ-Vmok70r8nJv2hfGjzL6S-cE-E68bn9866GLzUm1sNDCcwyg@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 09.10.2015 05:08, Adrian Chadd wrote: > you may have just bricked the firmware :( Yeah, get a serial cable and > see what it's printing out. It prints: > U-Boot 1.1.4 (Jun 5 2015 - 14:14:34) > > U-boot DB120 > > > DRAM: 128 MB > id read 0x100000ff > flash size 8MB, sector count = 128 > Flash: 8 MB > Using default environment > > PCIe Reset OK!!!!!! > In: serial > Out: serial > Err: serial > Net: ag934x_enet_initialize... > No valid address in Flash. Using fixed address > wasp reset mask:c03300 > WASP ----> S17 PHY * > : cfg1 0x7 cfg2 0x7114 > eth0: ba:be:fa:ce:08:41 > athrs17_reg_init: complete > eth0 up > eth0 > Autobooting in 1 seconds > ## Booting image at 9f020000 ... > Uncompressing Kernel Image ... Too big uncompressed streamLZMA ERROR 1 - must RESET board to recover And then it cycles. Meantime, I've recovered the device to older stock firmware using cable and then to latest firmware using TFTP client.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?56176752.5000803>