From owner-freebsd-questions Mon Apr 17 21:02:52 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id VAA13162 for questions-outgoing; Mon, 17 Apr 1995 21:02:52 -0700 Received: from mail.barrnet.net (mail.BARRNET.NET [131.119.246.7]) by freefall.cdrom.com (8.6.10/8.6.6) with ESMTP id VAA13156 for ; Mon, 17 Apr 1995 21:02:51 -0700 Received: from gaia.ucs.orst.edu (gaia.UCS.ORST.EDU [128.193.4.2]) by mail.barrnet.net (8.6.10/MAIL-RELAY-LEN) with ESMTP id LAA04639 for ; Fri, 14 Apr 1995 11:59:51 -0700 Received: from ccmail.orst.edu (ccmail-4.UCS.ORST.EDU [128.193.4.34]) by gaia.ucs.orst.edu (8.6.10/8.6.6) with SMTP id MAA00724 for ; Fri, 14 Apr 1995 12:02:59 -0700 Received: from cc:Mail by ccmail.orst.edu id AA797886239; Fri, 14 Apr 95 11:58:52 PST Date: Fri, 14 Apr 95 11:58:52 PST From: "Wayne Hernandez" Message-Id: <9503147978.AA797886239@ccmail.orst.edu> To: freebsd-questions@FreeBSD.org Subject: 2.1 GB SCSI DIsk won't newfs Sender: questions-owner@FreeBSD.org Precedence: bulk I'm trying to install 2.0-950322-SNAP (will probably change to the April before the weekend is thru). I can assign the partitions to the drive, but when I tell it to proceed, the system just locks up. I have my system configured as follows: 2.1 GB Seagate "Barracuda" external SCSI ID=2 SONY SDT-4000 DAT Tape Drive SCSI ID=3 w/terminator Maxtor 540MB IDE Drive (300 MB for Dos, rest is FreeBSD) 386DX-40 MB 8 MB Ram SoundBlaster SCSI/Soundcard (recognizes the tapedrive/Harddrive) 3COM 3C503 TP/AUI Port 300, IRQ 3, IOMEM 0xdc000 Intel Ethernet Express PRO TP/BNC (can't get configured yet) Port 320, IRQ 10, IOMEM 0x0, IOSIZE 32768 Is there something I left out? I had no problems installing to the IDE disk, but don't have enough room to load source for compiling a kernel to support the Intel card. Wayne