Date: Tue, 04 Feb 2003 10:58:04 -0800 From: Lee Damon <nomad@castle.org> To: freebsd-current@FreeBSD.ORG Subject: 5.0 on IBM T30: X11 failure Message-ID: <200302041858.h14Iw4hK006869@castle.org>
next in thread | raw e-mail | index | archive | help
I have just scratch installed 5.0 from CD. (By scratch install
I mean I told it to delete and recreate all partitions except
/users, so none of my old OS configurations should have been
preseved.)
When I installed 5.0 X11 worked. After turning off ACPI the built-in
trackpoint mouse started working. I installed the XFConfig86 that was
running on the portable from 4.7 and it came up without much trouble.
However, after doing a cvsup, make buildkernel, make buildworld,
mergemaster -v, installkernel and installworld, X no longer works. It
seems to get a SIGABRT (signal 6) before it even paints the screen.
Booting from kernel.generic (a complete copy of the initial kernel
directory) and kernel.old does not fix it.
Someone reported problems earlier and the suggested fix was to
portupgrade -f wrapper. I tried this, but it did not help.
I removed and reinstalled X from /stand/sysinstall (using FTP,
not CD. Hmm.. maybe I should try pulling it from CD again?) and
still have the same exit.
I am attaching the output of dmesg, the XFree86 session log,
my kernel configuration and the cvsupfile that I used.
A couple things I have noticed that might or might not have
bearing:
dmesg shows realmem at 255MB when the box has over 700MB
(top shows all of the memory, though)
In dmesg, right after vga0 there are several unknown: lines
The lock order reversal that is so popular in this list is
showing up here. (It also shows up on the desktop
system I'm using, but that box isn't running X.)
apmd still isn't running (it stars then exits quietly)
/dev/apm isn't being created
(I'm sure this isn't relevant, but thought I'd mention it)
probe complains about cardbus. I recall email about this
topic earlier and expect it is irrelevant to the
current problem.
Any hints, tips, or pointers at documentation I've missed would be
greatly appreciated.
thanks,
nomad
---------- dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #2: Tue Feb 4 09:17:29 PST 2003
root@tylendel.castle.org:/users/FreeBSD-5.0/obj/users/FreeBSD-5.0/src/sys/T
YLENDEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc067c000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1798479664 Hz
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1798.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 267780096 (255 MB)
avail memory = 253177856 (241 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 14 entries at 0xc00fdeb0
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0
on pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq
11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq
11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq
11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device
0.0 on pci2
cbb0: Could not map register memory
device_probe_and_attach: cbb0 attach returned 12
cbb0: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device
0.1 on pci2
cbb0: Could not map register memory
device_probe_and_attach: cbb0 attach returned 12
wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 2.0 on pci2
wi0: 802.11 address: 00:05:3c:03:84:79
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
fxp0: <Intel Pro/100 Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff
irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:09:6b:50:2c:01
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x
177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
eisa0: <EISA bus> on motherboard
eisa0: unknown card @@@0000 (0x00000000) at slot 1
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0x
c0000-0xcffff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> can't assign resources (port)
unknown: <IBM0057> can't assign resources (irq)
unknown: <PNP0501> can't assign resources (port)
unknown: <IBM0071> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
Timecounters tick every 10.000 msec
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 38154MB <TOSHIBA MK4019GAX> [77520/16/63] at ata0-master UDMA100
acd0: CD-RW <UJDA720 DVD/CDRW> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
lock order reversal
1st 0xc26f53f8 process lock (process lock) @ /users/FreeBSD-5.0/src/sys/kern/k
ern_descrip.c:2104
2nd 0xc26d6234 filedesc structure (filedesc structure) @
/users/FreeBSD-5.0/src/sys/kern/kern_descrip.c:2111
pid 523 (XFree86), uid 0: exited on signal 6
----------- XFree86.0.log
XFree86 Version 4.2.1 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 3 September 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: FreeBSD 5.0-RC i386 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Feb 4 10:36:17 2003
(==) Using config file: "/usr/X11R6/lib/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/S
peedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11
R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/URW/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,1a30 card 0000,0000 rev 04 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,1a31 card 0000,0000 rev 04 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,2482 card 1014,0220 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2484 card 1014,0220 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2487 card 1014,0220 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,248a card 1014,0220 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,2483 card 1014,0220 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2485 card 1014,0508 rev 02 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,2486 card 1014,051a rev 02 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c57 card 1014,0517 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 02:00:1: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 02:02:0: chip 1260,3873 card 8086,2513 rev 01 class 02,80,00 hdr 00
(II) PCI: 02:08:0: chip 8086,1031 card 1014,0209 rev 42 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xd0100000 - 0xd01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B]
(II) Bus 2: bridge is at (0:30:0), (0,2,8), BCTRL: 0x04 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0x00004000 - 0x000040ff (0x100) IX[B]
[1] -1 0x00004400 - 0x000044ff (0x100) IX[B]
[2] -1 0x00004800 - 0x000048ff (0x100) IX[B]
[3] -1 0x00004c00 - 0x00004cff (0x100) IX[B]
[4] -1 0x00005000 - 0x000050ff (0x100) IX[B]
[5] -1 0x00005400 - 0x000054ff (0x100) IX[B]
[6] -1 0x00005800 - 0x000058ff (0x100) IX[B]
[7] -1 0x00005c00 - 0x00005cff (0x100) IX[B]
[8] -1 0x00006000 - 0x000060ff (0x100) IX[B]
[9] -1 0x00006400 - 0x000064ff (0x100) IX[B]
[10] -1 0x00006800 - 0x000068ff (0x100) IX[B]
[11] -1 0x00006c00 - 0x00006cff (0x100) IX[B]
[12] -1 0x00007000 - 0x000070ff (0x100) IX[B]
[13] -1 0x00007400 - 0x000074ff (0x100) IX[B]
[14] -1 0x00007800 - 0x000078ff (0x100) IX[B]
[15] -1 0x00007c00 - 0x00007cff (0x100) IX[B]
[16] -1 0x00008000 - 0x000080ff (0x100) IX[B]
[17] -1 0x00008400 - 0x000084ff (0x100) IX[B]
[18] -1 0x00008800 - 0x000088ff (0x100) IX[B]
[19] -1 0x00008c00 - 0x00008cff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0xd0200000 - 0xdfffffff (0xfe00000) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0xf0000000 - 0xf80fffff (0x8100000) MX[B]
(II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) ATI Radeon Mobility M7 LW rev 0, Mem @ 0xe8000000/27,
0xd0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xd0200000 - 0xd03fffff (0x200000) MX[B]E
[1] -1 0xf8000000 - 0xffffffff (0x8000000) MX[B]E
[2] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]E
[3] -1 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[4] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[5] -1 0x00008000 - 0x000080ff (0x100) IX[B]E
[6] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[7] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[8] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[9] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
[10] -1 0x00001880 - 0x000018ff (0x80) IX[B]E
[11] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[12] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[13] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[14] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[15] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[16] -1 0x00001840 - 0x0000187f (0x40) IX[B]E
[17] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[18] -1 0x00001800 - 0x000018ff (0x100) IX[B]E
[19] -1 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x000018bf
(II) PCI I/O resource overlap reduced 0x00001840 from 0x0000187f to 0x0000185f
(II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000181f
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xd0200000 - 0xd03fffff (0x200000) MX[B]E
[1] -1 0xf8000000 - 0xffffffff (0x8000000) MX[B]E
[2] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]E
[3] -1 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[4] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[5] -1 0x00008000 - 0x000080ff (0x100) IX[B]E
[6] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[7] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[8] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[9] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
[10] -1 0x00001880 - 0x000018bf (0x40) IX[B]E
[11] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[12] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[13] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[14] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[15] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[16] -1 0x00001840 - 0x0000185f (0x20) IX[B]E
[17] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[18] -1 0x00001800 - 0x0000181f (0x20) IX[B]E
[19] -1 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0200000 - 0xd03fffff (0x200000) MX[B]E
[6] -1 0xf8000000 - 0xffffffff (0x8000000) MX[B]E
[7] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]E
[8] -1 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[9] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x00008000 - 0x000080ff (0x100) IX[B]E
[13] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[14] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[15] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[16] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
[17] -1 0x00001880 - 0x000018bf (0x40) IX[B]E
[18] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[19] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[20] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[21] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[22] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[23] -1 0x00001840 - 0x0000185f (0x20) IX[B]E
[24] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[25] -1 0x00001800 - 0x0000181f (0x20) IX[B]E
[26] -1 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 6.4.8
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) ATI: ATI driver (version 6.4.8) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
ATI Rage 128 RL (AGP), ATI Rage 128 SM (AGP),
ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP),
ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI),
ATI Rage 128 Pro ULTRA TF (AGP), ATI Rage 128 Pro ULTRA TL (AGP),
ATI Rage 128 Pro ULTRA TR (AGP), ATI Rage 128 Mobility LE (PCI),
ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE QY (AGP), ATI Radeon VE QZ (AGP),
ATI Radeon Mobility LW (AGP), ATI Radeon Mobility LY (AGP),
ATI Radeon Mobility LZ (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
ATI Radeon 7500 QW (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "Card0".
(--) Chipset ATI Radeon Mobility LW (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0200000 - 0xd03fffff (0x200000) MX[B]E
[6] -1 0xf8000000 - 0xffffffff (0x8000000) MX[B]E
[7] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]E
[8] -1 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[9] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0x00008000 - 0x000080ff (0x100) IX[B]E
[13] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[14] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[15] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[16] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
[17] -1 0x00001880 - 0x000018bf (0x40) IX[B]E
[18] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[19] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[20] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[21] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[22] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[23] -1 0x00001840 - 0x0000185f (0x20) IX[B]E
[24] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[25] -1 0x00001800 - 0x0000181f (0x20) IX[B]E
[26] -1 0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 4.0.1
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0200000 - 0xd03fffff (0x200000) MX[B]E
[6] -1 0xf8000000 - 0xffffffff (0x8000000) MX[B]E
[7] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]E
[8] -1 0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
[9] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[10] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0x00008000 - 0x000080ff (0x100) IX[B]E
[16] -1 0x00002000 - 0x000020ff (0x100) IX[B]E
[17] -1 0x00002400 - 0x000024ff (0x100) IX[B]E
[18] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E
[19] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E
[20] -1 0x00001880 - 0x000018bf (0x40) IX[B]E
[21] -1 0x00001860 - 0x0000187f (0x20) IX[B]E
[22] -1 0x00000374 - 0x00000377 (0x4) IX[B]E
[23] -1 0x00000170 - 0x0000017f (0x10) IX[B]E
[24] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E
[25] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E
[26] -1 0x00001840 - 0x0000185f (0x20) IX[B]E
[27] -1 0x00001820 - 0x0000183f (0x20) IX[B]E
[28] -1 0x00001800 - 0x0000181f (0x20) IX[B]E
[29] -1 0x00003000 - 0x000030ff (0x100) IX[B](B)
[30] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[31] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xf0000,0x10000)
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility LW (AGP)" (ChipID = 0x4c57)
(--) RADEON(0): Linear framebuffer at 0xe8000000
(--) RADEON(0): MMIO registers at 0xd0100000
(==) RADEON(0): Write-combining range (0xd0100000,0x80000) was already clear
(--) RADEON(0): VideoRAM: 16384 kByte (64-bit DDR SDRAM)
(==) RADEON(0): Write-combining range (0xd0100000,0x80000) was already clear
(II) RADEON(0): Primary Display == Type 2
(II) RADEON(0): Panel ID string: SXGA+ Single (85MHz)
(II) RADEON(0): Panel Size from BIOS: 1400x1050
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): I2C bus "DDC" initialized.
(==) RADEON(0): Write-combining range (0xd0100000,0x80000) was already clear
(II) RADEON(0): I2C device "DDC:ddc2" registered.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) RADEON(0): VESA BIOS detected
(II) RADEON(0): VESA VBE Version 2.0
(II) RADEON(0): VESA VBE Total Mem: 16320 kB
(II) RADEON(0): VESA VBE OEM: ATI MOBILITY RADEON 7500
(II) RADEON(0): VESA VBE OEM Software Rev: 1.0
(II) RADEON(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) RADEON(0): VESA VBE OEM Product: P7
(II) RADEON(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) RADEON(0): VESA VBE DDC supported
(II) RADEON(0): VESA VBE DDC Level none
(II) RADEON(0): VESA VBE DDC transfer in appr. 2 sec.
(II) RADEON(0): VESA VBE DDC read failed
(==) RADEON(0): Write-combining range (0xd0100000,0x80000) was already clear
(==) RADEON(0): Write-combining range (0xe8000000,0x1000000)
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=12000 max=35000; xclk=18300
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
Fatal server error:
Caught signal 10. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.
----------- TYLENDEL (kernel conf)
(The only difference between this and GENERIC is apm is uncommented
and the IDENT)
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-con
fig.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.375 2003/02/01 18:45:17 joe Exp $
machine i386
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident TYLENDEL
maxusers 0
#To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options SCHED_4BSD #4BSD scheduler
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options SOFTUPDATES #Enable FFS soft updates support
options UFS_ACL #Support for access control lists
options UFS_DIRHASH #Improve performance on big directories
options MD_ROOT #MD is a potential root device
options NFSCLIENT #Network Filesystem Client
options NFSSERVER #Network Filesystem Server
options NFS_ROOT #NFS usable as root device, requires NFSCLIENT
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options PROCFS #Process filesystem (requires PSEUDOFS)
options PSEUDOFS #Pseudo-filesystem framework
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 #Compatible with FreeBSD4
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# Debugging for use in -current
options DDB #Enable the kernel debugger
options INVARIANTS #Enable calls of extra sanity checking
options INVARIANT_SUPPORT #Extra sanity checks of internal structures,
required by INVARIANTS
options WITNESS #Enable checks to detect deadlocks and cycles
options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# RAID controllers interfaced to the SCSI subsystem
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options!
device iir # Intel Integrated RAID
device mly # Mylex AcceleRAID/eXtremeRAID
# SCSI peripherals
device scbus # SCSI bus (required)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device amr # AMI MegaRAID
device ida # Compaq Smart RAID
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# Pcmcia and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device ste # Sundance ST201 (D-Link DFE-550TX)
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device bge # Broadcom BCM570xx Gigabit Ethernet
# ISA Ethernet NICs. pccard nics included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device lnc # NE2100, NE32-VL Lance Ethernet cards
device sn # SMC's 9000 series of ethernet chips
device xe # Xircom pccard ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
-------- cvsupfile
*default host=cvsup6.FreeBSD.org
*default base=/usr
*default prefix=/usr
*default release=cvs
*default tag=.
*default delete use-rel-suffix
src-all
src-crypto
src-secure
*default tag=.
ports-all
nomad
----------- - Lee "nomad" Damon - \
play: nomad@castle.org or castle!nomad \
work: nomad@ee.washington.edu \
/\
Seneschal, Castle PAUS. / \
"Celebrate Diversity" / \
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200302041858.h14Iw4hK006869>