From owner-freebsd-questions Sun Oct 25 08:34:45 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id IAA24903 for freebsd-questions-outgoing; Sun, 25 Oct 1998 08:34:45 -0800 (PST) (envelope-from owner-freebsd-questions@FreeBSD.ORG) Received: from freefall.freebsd.org (freefall.FreeBSD.ORG [204.216.27.21]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id IAA24894 for ; Sun, 25 Oct 1998 08:34:40 -0800 (PST) (envelope-from kuku@gilberto.physik.RWTH-Aachen.DE) Received: from gilberto.physik.RWTH-Aachen.DE (gilberto.physik.rwth-aachen.de [137.226.30.2]) by freefall.freebsd.org (8.8.8/8.8.5) with ESMTP id IAA16530 for ; Sun, 25 Oct 1998 08:34:35 -0800 (PST) Received: (from kuku@localhost) by gilberto.physik.RWTH-Aachen.DE (8.8.8/8.8.7) id RAA27239; Sun, 25 Oct 1998 17:34:09 +0100 (MET) (envelope-from kuku) Message-ID: <19981025173409.A27225@gil.physik.rwth-aachen.de> Date: Sun, 25 Oct 1998 17:34:09 +0100 From: Christoph Kukulies To: Doug White , Christoph Kukulies Cc: freebsd-questions@freefall.cdrom.com Subject: Re: PAO - no free configuration for card (ppcard) References: <199810221825.UAA12887@gilberto.physik.RWTH-Aachen.DE> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Mailer: Mutt 0.91 In-Reply-To: ; from Doug White on Fri, Oct 23, 1998 at 09:00:03AM -0700 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Fri, Oct 23, 1998 at 09:00:03AM -0700, Doug White wrote: > I'm still trying to figure out why ou send mail to > freebsd-questions@freefall.cdrom.com when it's just questions@freebsd.org > -- it's throwing my mail filter off! :) > > On Thu, 22 Oct 1998, Christoph Kukulies wrote: > > > I grabbed the 2.2.7 PAO release and tried to install my > > D-Link ethernet card (ed0) - this used to work under > > PAO 2.2.5. > > > > Unfortunately I lost my previous pccard.conf and related files > > OTOH I don't think they were containing anything crucial. > > > > Anyway, I'm getting > > > > pccardd: No free configuration for card D-Link > > Hack /etc/pccard.conf and make sure all of your free IRQs and a handful of > port ranges are available. Also try a 'pccardc dumpcis' and see what the > card willl accept for resources. My 3com will only accept certain IRQs. > I got around this previous `no free configuration slot ' message now by reinstalling PAO (980913). I had the wrong pccardd running. The syntax seems to have diverged between PAO and 2.2.7R. Now the effect is that I'm getting ed0: device timeout. ed0: device timeout. ed0: device timeout. as soon as the interface is configured (ifconfig). Here is the kernel config: # # Sample Laptop Configuration # for lenlen.ntc.keio.ac.jp (Toshiba Libretto 50CT) # Tatsumi Hosokawa # machine "i386" cpu "I586_CPU" ident PAO maxusers 16 options INET #InterNETworking options FFS #Berkeley Fast Filesystem #options NFS #Network Filesystem #options MFS #Memory Filesystem #options MSDOSFS #MSDOS Filesystem #options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console #options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor # If your laptop have not had Windoze95-Ready BIOS, please update it. # Such old BIOS'es sometimes have critical bugs at 32-bit protected # mode APM BIOS interface (which have not used by Windoze 3.1). # PC-card suspend/resume support (experimental) options APM_PCCARD_RESUME options PCIC_RESUME_RESET # Keep power for serial cards when the system suspends # (If your machine hangs up when you try to suspend the system with # FAX/Modem PCMCIA card, uncomment this option). #options SIO_SUSP_KEEP_PWR # Detach SCSI devices when the SCSI card is removed options SCSI_DETACH # Detach ATAPI devices when the ATA card is removed options ATAPI_DETACH # Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz # band that US version uses. If you want to use Japanese version of # WaveLAN, uncomment this line, or edit the corresponding config entry # of /etc/pccard.conf. #options "WAVELAN_PCMCIA_24" # Suspend the system when the battery status is "Low" #options "APM_BATT_LOW_SUSPEND" # If you want to use NTP on laptop machines, uncomment the following # option. Current APM implementation affects NTP client. #options "APM_NO_CLOCK_ADJUST" # Some X-servers cannot survive suspend/resume on laptop. # This option kicks her when the system is resumed from suspended mode. #options SYSCONS_VTY_RESUME config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 # Dont remove these two lines! pseudo-device card 1 # You must use "flags 0x1" when you don't hear any negotiation noise(?) # if you use modem card, or pccardd doesn't read cis tuple, tell you # 'No card in database for"(null)"("(null)")' in case of Cirrus Logic's # pcic is your PC. device pcic0 at isa? port 0x3e0 flags 0x1 irq 11 vector pcicintr #device pcic0 at isa? port 0x3e0 irq 11 vector pcicintr #device pcic0 at isa? port 0x3e4 irq 11 vector pcicintr device pcic1 at isa? port 0x3e2 # for HiNote Ultra II #device pcic1 at isa? port 0x3e4 # for Chandra II controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x80ff80ff vector wdintr disk wd0 at wdc0 drive 0 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # If the screen flickers badly when the mouse pointer is moved, try this. options SC_BAD_FLICKER # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? # Advanced Power Management options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr device ed0 at isa? port 0x280 net irq 10 iomem 0xd0000 vector edintr #device ep0 at isa? port 0x300 net irq 10 vector epintr pseudo-device loop pseudo-device ether pseudo-device log # DHCP uses BPF (Berkeley Packet Filter) pseudo-device bpfilter 4 # ijppp uses tun instead of ppp device pseudo-device ppp 1 pseudo-device vn 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's options DDB # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG Here is output of pccardc dumpcis: Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: d1 0a ff Common memory device information: Device number 1, type Function specific, WPS = OFF Speed = 250nS, Memory block size = 8Kb, 2 units Tuple #2, code = 0x1c (Other conditions for common memory), length = 4 000: 01 d1 0a ff (MWAIT) Tuple #3, code = 0x17 (Attribute memory descriptor), length = 3 000: 51 7a ff Attribute memory device information: Device number 1, type FLASH EEPROM, WPS = OFF Speed = 250nS, Memory block size = 8Kb, 16 units Tuple #4, code = 0x20 (Manufacturer ID), length = 4 000: 49 01 65 02 PCMCIA ID = 0x149, OEM ID = 0x265 Tuple #5, code = 0x21 (Functional ID), length = 2 000: 06 01 Network/LAN adapter - POST initialize Tuple #6, code = 0x15 (Version 1 info), length = 38 000: 04 01 44 2d 4c 69 6e 6b 00 44 45 2d 36 35 30 00 010: 56 65 72 20 30 31 2e 30 30 00 ff 00 00 00 00 00 020: 00 00 00 00 00 00 Version = 4.1, Manuf = [D-Link],card vers = [DE-650] Addit. info = [Ver 01.00],[ÿ] Tuple #7, code = 0x1a (Configuration map), length = 5 000: 01 20 00 04 0b Reg len = 2, config register addr = 0x400, last config = 0x20 Registers: XX-X---- Tuple #8, code = 0x1b (Configuration entry), length = 7 000: e0 81 18 45 30 fc be Config index = 0x20(default) Interface byte = 0x81 (I/O) wait signal supported Card decodes 5 address lines, limited 8/16 Bit I/O IRQ modes: Level IRQs: 2 3 4 5 6 7 9 10 11 12 13 15 Tuple #9, code = 0x14 (No link), length = 0 Tuple #10, code = 0xff (Terminator), length = 0 2 slots found Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2.7-RELEASE #3: Sat Oct 24 17:59:13 GMT 1998 root@myname.my.domain:/usr/src/sys/compile/PAO CPU: Pentium/P54C (99.72-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping=12 Features=0x1bf real memory = 33554432 (32768K bytes) avail memory = 31117312 (30388K bytes) Initializing PC-card drivers: ed sio wdc Probing for devices on PCI bus 0: chip0 rev 176 class 60000 on pci0:0:0 vga0 rev 0 class 30000 on pci0:17:0 chip1 rev 163 class 60100 on pci0:18:0 pci0:18:1: UMC, device=0x0101, class=storage (ide) [no driver assigned] Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff80ff on isa wdc0: unit 0 (wd0): , 32-bit, multi-block-16 wd0: 6194MB (12685680 sectors), 13424 cyls, 15 heads, 63 S/T, 512 B/S pcic0 at 0x3e0-0x3e1 irq 11 flags 0x1 on isa PC-Card ctlr(0) Vadem 468 (5 mem & 2 I/O windows) pcic0: slot 0 controller I/O address 0x3e0 pcic0: slot 1 controller I/O address 0x3e0 pcic1: sharing irq 11 with other pcic pcic1 not found at 0x3e2 npx0 flags 0x1 on motherboard npx0: INT 16 interface apm0 on isa apm: found APM BIOS version 1.1 Intel Pentium F00F detected, installing workaround Card inserted, slot 0 ed0: address 00:80:c8:84:28:ab, type NE2000 (16 bit) ed0: device timeout > Doug White > Internet: dwhite@resnet.uoregon.edu | FreeBSD: The Power to Serve > http://gladstone.uoregon.edu/~dwhite | www.freebsd.org -- Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message