Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 16 Jan 2001 18:27:53 +1030 (CST)
From:      "Daniel O'Connor" <doconnor@gsoft.com.au>
To:        Soren Schmidt <sos@freebsd.dk>
Cc:        sos@freebsd.org, freebsd-questions@freebsd.org, (Herbert) <h.j.s@gmx.at>
Subject:   Re: Epox 8KTA2
Message-ID:  <XFMail.010116182753.doconnor@gsoft.com.au>
In-Reply-To: <200101160729.IAA14331@freebsd.dk>

next in thread | previous in thread | raw e-mail | index | archive | help

On 16-Jan-01 Soren Schmidt wrote:
>  It seems Daniel O'Connor wrote:
> > 
> > I am CC'ing Soren (Mr ATA) to see if he has any input.
> > ad0: WRITE command timeout tag=0 serv=0 - resetting
> > ad0: trying fallback to PIO mode
> > ata0: resetting devices .. done
> > 
> > The ATA controller is reported as ->
> > atapci0: <VIA 82C686 ATA66 controller> port 0xa000-0xa00f at device 7.1 on pci0
>  
>  Hmm, could I have the output from a pciconf -l ?

Here you go ->

spare1:~>sudo pciconf -l
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x03051106 rev=0x03 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0x83051106 rev=0x00 hdr=0x01
isab0@pci0:7:0: class=0x060100 card=0x00001106 chip=0x06861106 rev=0x40 hdr=0x00
atapci0@pci0:7:1:       class=0x01018a card=0x05711106 chip=0x05711106 rev=0x06
hdr=0x00
uhci0@pci0:7:2: class=0x0c0300 card=0x12340925 chip=0x30381106 rev=0x16 hdr=0x00
chip1@pci0:7:4: class=0x068000 card=0x30571106 chip=0x30571106 rev=0x40 hdr=0x00
chip2@pci0:7:5: class=0x040100 card=0x45111106 chip=0x30581106 rev=0x50 hdr=0x00
dc0@pci0:8:0:   class=0x020000 card=0x1430146c chip=0x00191011 rev=0x41 hdr=0x00
adv0@pci0:9:0:  class=0x010000 card=0x131010cd chip=0x130010cd rev=0x03 hdr=0x00
gsio0@pci0:10:0:        class=0xffff00 card=0x905010b5 chip=0x00014753 rev=0x01
hdr=0x00
none0@pci1:0:0: class=0x030000 card=0x47441002 chip=0x47421002 rev=0x5c hdr=0x00

>  I have a hunch that this board has a VIA 82C686B on it, and those seem
>  to be problematic as VIA apparently changed the programming interface
>  yet again, and still with the same ID as they've used for at least
>  3 different kinds of silicon :(

Ahh.. how clever of them :(

---
Daniel O'Connor software and network engineer
for Genesis Software - http://www.gsoft.com.au
"The nice thing about standards is that there
are so many of them to choose from."
  -- Andrew Tanenbaum


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.010116182753.doconnor>