Date: Sun, 1 Dec 2002 15:52:31 +0100 From: Fam_Schlesinger@t-online.de (Felix Schlesinger) To: freebsd-stable@freebsd.org Cc: freebsd-hackers@freebsd.org Subject: Interrupt Timeouts Zoltrix pcm card Message-ID: <15850.8751.879584.523190@felixm.schlesinger.dyndns.org>
next in thread | raw e-mail | index | archive | help
Hi
I have a Zoltrix Nightingale (CMI8738) PCI card in my PC. It is detected
by pcm, but when any sound is played, I only get interrupt timeouts
("pcm0:play:0: play interrupt timeout, channel dead" from the
kernel). Its interessting that mpg123 e.g. exits after a few seconds
without generating an error (Decoding of ... finished).
With the OSS drivers its exactly the same, just the error-message is a
little different) I tested with different configurations (GENERIC or
custom (minimal) kernel, removing all other cards, chaning PCI-slots,
...) but nothing seemed to have any effect on the problem, so its not
due to IRQ-sharing or something like that. The card is known to work
under FreeBSD, but some people reported problems with the CMI8738-Chip
in connection with APM and laptops that lead to the same message. This
however is not the case here. I included all relevant output below, if I
forgot anything please tell me, and I will post it.
%uname -pr
4.7-STABLE i386
%dmesg (boot -v)
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #2: Sun Dec 1 12:05:35 CET 2002
root@felix.schlesinger.dyndns.org:/usr/src/sys/compile/kern2
Calibrating clock(s) ... TSC clock: 349058787 Hz, i8254 clock: 1193153 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 349069023 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (349.07-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x0032d000 - 0x07fe7fff, 130789376 bytes (31931 pages)
avail memory = 127512576 (124524K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fad30
bios32: Entry = 0xfb1b0 (c00fb1b0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xb1e0
pnpbios: Found PnP BIOS data at 0xc00fbe00
pnpbios: Entry = f0000:be28 Rev = 1.0
Other BIOS signatures found:
ACPI: 000f70b0
Preloaded elf kernel "kernel" at 0xc0306000.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 6 entries at 0xc00fdd60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x7190, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base d8000000, size 26
found-> vendor=0x8086, dev=0x7191, revid=0x03
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
found-> vendor=0x8086, dev=0x7110, revid=0x02
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7111, revid=0x01
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000f000, size 4
found-> vendor=0x8086, dev=0x7112, revid=0x01
class=0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=255
map[20]: type 1, range 32, base 0000e000, size 5
found-> vendor=0x8086, dev=0x7113, revid=0x02
class=06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[90]: type 1, range 32, base 00005000, size 4
found-> vendor=0x1282, dev=0x9102, revid=0x10
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000e400, size 7
map[14]: type 1, range 32, base e0000000, size 7
found-> vendor=0x13f6, dev=0x0111, revid=0x10
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=12
map[10]: type 1, range 32, base 0000e800, size 8
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x0020, revid=0x04
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base dc000000, size 24
map[14]: type 1, range 32, base de000000, size 24
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva TNT graphics accelerator> (vendor=0x10de, dev=0x0020) at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: mask=03 ostat0=40 ostat2=50
ata1-master: ATAPI 54 6b
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=40 stat1=00
ata1-master: ATA 41 65
ata1: devices=08
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> (vendor=0x8086, dev=0x7112) at 7.2
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0
dc0: <Davicom DM9102 10/100BaseTX> port 0xe400-0xe47f mem 0xe0000000-0xe000007f irq 10 at device 9.0 on pci0
dc0: Ethernet address: 00:00:ab:91:30:92
miibus0: <MII bus> on dc0
amphy0: <Am79C873 10/100 media interface> on miibus0
amphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: dc0 attached
pcm0: <CMedia CMI8738> port 0xe800-0xe8ff irq 12 at device 10.0 on pci0
pcm0: sndbuf_setmap 3000, 4000; 0xc81f6000 -> 3000
pcm0: sndbuf_setmap 11000, 4000; 0xc81fa000 -> 11000
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
@@@9519: adding io range 0x200-0x3ff, size=0x20, align=0x20
@@@9519: adding irq mask 0x9e38
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc87ff on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x21 0x31 0x21 0x21
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
isa_probe_children: probing PnP devices
ed1: <NE2000 PLUG & PLAY ETHERNET CARD> at port 0x200-0x21f irq 3 on isa0
bpf: ed1 attached
ed1: address 00:00:e8:6b:aa:ed, type NE2000 (16 bit)
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c000, tty 631012, net 67141a
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ar: FreeBSD check1 failed
ad0: <ST380021A/3.19> ATA-5 disk at ata0-master
ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-slave: success setting PIO4 on generic chip
acd0: <PHILIPS CDRW1610A/0.010000> CD-RW drive at ata1 as slave
acd0: read 2755KB/s (36026KB/s) write 2755KB/s (2755KB/s), 8192KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 128 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: CD-R blank
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 156296384, size 156296322 : OK
start_init: trying /sbin/init
bpf: tun0 attached
IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled
#pciconf -lv
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x71908086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Implemented)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x71918086 rev=0x03 hdr=0x01
vendor = 'Intel Corporation'
device = '82443BX/ZX 440BX/ZX AGPset PCI-to-PCI bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:7:0: class=0x060100 card=0x00000000 chip=0x71108086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
class = bridge
subclass = PCI-ISA
atapci0@pci0:7:1: class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
class = mass storage
subclass = ATA
none0@pci0:7:2: class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
class = serial bus
subclass = USB
chip1@pci0:7:3: class=0x068000 card=0x00000000 chip=0x71138086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
class = bridge
subclass = PCI-unknown
dc0@pci0:9:0: class=0x020000 card=0x91021282 chip=0x91021282 rev=0x10 hdr=0x00
vendor = 'Davicom Semiconductor Inc.'
device = 'DM9102/A/AF,DM9801 Fast Ethernet Adapter'
class = network
subclass = ethernet
pcm0@pci0:10:0: class=0x040100 card=0x011113f6 chip=0x011113f6 rev=0x10 hdr=0x00
vendor = 'C-Media Electronics Inc.'
device = 'CMI8738/PCI C3DX PCI Audio Chip'
class = multimedia
subclass = audio
none1@pci1:0:0: class=0x030000 card=0x05501092 chip=0x002010de rev=0x04 hdr=0x00
vendor = 'Nvidia Corporation'
device = 'Riva TNT GUI+3D Accelerator [NV4]'
class = display
subclass = VGA
PNP-OS is set to off the BIOS and all IRQs are assigned to PCI/PnP
Does anybody have any idea were to look (the source around the
error-message doesn't seem very helpful to me)?
Ciao
Felix
xposted, please follow up where appropriate.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15850.8751.879584.523190>