Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 04 Feb 2009 16:55:22 -0500
From:      FreeBSD <freebsd@optiksecurite.com>
Cc:        "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>
Subject:   Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
Message-ID:  <498A0ECA.2070002@optiksecurite.com>
In-Reply-To: <497E24E5.5090701@optiksecurite.com>
References:  <497DDDB7.4000702@optiksecurite.com> <497E07D1.3030604@optiksecurite.com> <01FB8F39BAD0BD49A6D0DA8F78973929561F@Mercury.galaxy.lan.lcl> <497E24E5.5090701@optiksecurite.com>

Next in thread | Previous in thread | Raw E-Mail | Index | Archive | Help
FreeBSD a écrit :
> Graeme Dargie a écrit :
>> If you do a dmesg are you also showing a watchdog time out for the nic ?
>>
>> I only ask as I am having the exact same problem with the exact same 
>> card and I have yet to find a solution, if I come across something I 
>> will let you know.
>>
>> Regards
>> Graeme
> 
> Not a single time...sorry.
> 
>>
>> -----Original Message-----
>> From: FreeBSD [mailto:freebsd@optiksecurite.com] Sent: 26 January 2009 
>> 18:58
>> To: freebsd-questions@freebsd.org
>> Subject: Re: Link UP/DOWN problem with re0 on FreeBSD 7.1
>>
>> FreeBSD a écrit :
>>> Hi everyone,
>>>
>>> Just to put you in context, I applied the following patch to make the 
>>> card available:
>>>
>>> SVN rev 186389 on 2008-12-22 00:46:22Z by yongari
>>>
>>> Since we don't request reset for rlphy(4), the link state 'UP'
>>> event from mii(4) may not be delivered if valid link was already
>>> established. To address the issue, check current link state after
>>> driving MII_TICK. This should fix a regression introduced in
>>> r185753 on fast ethernet controllers.
>>>
>>> ---
>>>
>>> I don't have any issue related to that anymore. The problem is that I 
>>> get link UP/DOWN a few times per hour on 3 identical machines that I 
>>> dumped/restored. They are all pluged in a Cisco switch that works 
>>> fine for every other PCs.
>>>
>>> Jan 26 06:09:15 term005 kernel: re0: link state changed to DOWN
>>> Jan 26 06:09:17 term005 kernel: re0: link state changed to UP
>>>
>>> I tried to switch cables, but I got the same result.
>>>
>>> There is the pciconf -lv output:
>>>
>>> re0@pci0:3:0:0: class=0x020000 card=0x02831028 chip=0x816810ec 
>>> rev=0x02 hdr=0x00
>>>     vendor     = 'Realtek Semiconductor'
>>>     device     = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
>>>     class      = network
>>>     subclass   = ethernet
>>>
>>> There is the output of vmstat -i:
>>>
>>> interrupt                          total       rate
>>> irq18: re0 ehci0++                 63766          0
>>> irq19: atapci0                    277001          3
>>> cpu0: timer                    156068748       1961
>>> Total                          156409515       1966
>>>
>>> Could it be related to the fact that there is re0 and ehci0++ on the 
>>> same IRQ?
>>>
>>> Thank you for your help,
>>>
>>> Martin
>>
>> I just tried with a brand new Dell 2708 switch and the problem is 
>> still there. I just confirmed that the UP/DOWN occurs every 10 minutes 
>> (+- a few seconds).
>>
>> Thanks again,
>>
>> Martin
>>

Just to follow-up on my own problem...

I tried to disable some options of the card with :
ifconfig re0 -rxcsum -txcsum -tso -lro -vlanhwtag

but nothing as changed. I just tried to download a big file (FreeBSD 
7.1-REL DVD iso in fact) to see if the deconnection occurs even during a 
transfer. The DVD downloaded successfully and I verified that the MD5 
are OK. BUT, /var/log/messages continue to tell me that:
Feb  4 16:09:29 term003 kernel: re0: link state changed to UP
Feb  4 16:19:26 term003 kernel: re0: link state changed to DOWN
Feb  4 16:19:30 term003 kernel: re0: link state changed to UP
Feb  4 16:19:32 term003 kernel: re0: link state changed to DOWN

during the transfer (which worked OK). I don't know if that can help 
someone to help me ;)

Thanks,

Martin




Want to link to this message? Use this URL: <http://docs.FreeBSD.org/cgi/mid.cgi?498A0ECA.2070002>