From owner-freebsd-questions Sat Jul 12 11:19:16 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id LAA13926 for questions-outgoing; Sat, 12 Jul 1997 11:19:16 -0700 (PDT) Received: from cedb.dpcsys.com (cedb.DPCSYS.com [209.25.4.4]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id LAA13916 for ; Sat, 12 Jul 1997 11:19:14 -0700 (PDT) Received: from localhost (dan@localhost) by cedb.dpcsys.com (8.8.5/8.8.2) with SMTP id SAA04370; Sat, 12 Jul 1997 18:19:05 GMT Date: Sat, 12 Jul 1997 11:19:04 -0700 (PDT) From: Dan Busarow To: Richard Dunham cc: questions@FreeBSD.ORG Subject: Re: Network Card change. In-Reply-To: <0000A506.1763@iwv.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk On Fri, 11 Jul 1997, Richard Dunham wrote: > The freebsd server is configued to work with a 3c509C card. > Due to a bad BNC port I have changed the card and inserted a > new 3C509C card. > > During a boot -c, I enter config mode, probe the card, and continue > booting. The probe finds the card, but the OS reports EP0 not found. If I recall correctly the 3c509 needs to be software configured in DOS first. Configure it to match the ep0 default settings, or configure it to work correctly in your system and change the ep0 settings to match by booting with -c. The probes just test the memory locations, not the interrupts so it is possible for them to see a mis-configured card. Dan -- Dan Busarow 714 443 4172 DPC Systems / Beach.Net dan@dpcsys.com Dana Point, California 83 09 EF 59 E0 11 89 B4 8D 09 DB FD E1 DD 0C 82