Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 15 Sep 2006 18:38:28 -0700
From:      "Jack Vogel" <jfvogel@gmail.com>
To:        "Martin Nilsson" <martin@gneto.com>
Cc:        freebsd-stable@freebsd.org
Subject:   Re: em0: watchdog timeout -- resetting (6.1-STABLE)
Message-ID:  <2a41acea0609151838r57125657p2b20499d30f694b4@mail.gmail.com>
In-Reply-To: <450A952C.9080600@gneto.com>
References:  <op.tffdo3pj8527sy@laptop.klop.ws> <op.tfud73ep8527sy@guido.klop.ws> <2a41acea0609132023q2d23ac2eq4960cd93fb45a69b@mail.gmail.com> <4509E4CD.8050102@visi.com> <450A952C.9080600@gneto.com>

next in thread | previous in thread | raw e-mail | index | archive | help
On 9/15/06, Martin Nilsson <martin@gneto.com> wrote:
> I'm also seeing these on a Supermicro PDSMi board with a recent stable.
> Please tell me what debugging info that is needed to fix this.
>
> /Martin
>
>
> FreeBSD mailbox 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #1: Sun Sep 10
> 17:43:15 CEST 2006 root@mailbox:/usr/obj-local/usr/src/sys/SMP  amd64
>
> lspci -v output:
>
> 04:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet
> Controller (Copper) (rev 03)
>          Subsystem: Super Micro Computer Inc Unknown device 108c
>          Flags: bus master, fast devsel, latency 0, IRQ 16
>          Memory at ed200000 (32-bit, non-prefetchable)
>          I/O ports at 4000
>          Capabilities: [c8] Power Management version 2
>          Capabilities: [d0] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
>          Capabilities: [e0] Express Endpoint IRQ 0
>
> 05:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet
> Controller
>          Subsystem: Super Micro Computer Inc Unknown device 109a
>          Flags: bus master, fast devsel, latency 0, IRQ 17
>          Memory at ed300000 (32-bit, non-prefetchable)
>          I/O ports at 5000
>          Capabilities: [c8] Power Management version 2
>          Capabilities: [d0] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
>          Capabilities: [e0] Express Endpoint IRQ 0

Martin, do you see similar problems using either port, I ask because this
system may be similar to one that Yahoo has and there was only a
problem with one port and not the other, can you check this out please?

Jack



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2a41acea0609151838r57125657p2b20499d30f694b4>