Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 19 Feb 2012 12:10:03 GMT
From:      dfilter@FreeBSD.ORG (dfilter service)
To:        freebsd-net@FreeBSD.org
Subject:   Re: kern/165032: commit references a PR
Message-ID:  <201202191210.q1JCA3Bh047074@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/165032; it has been noted by GNATS.

From: dfilter@FreeBSD.ORG (dfilter service)
To: bug-followup@FreeBSD.org
Cc:  
Subject: Re: kern/165032: commit references a PR
Date: Sun, 19 Feb 2012 12:09:30 +0000 (UTC)

 Author: marius
 Date: Sun Feb 19 12:09:17 2012
 New Revision: 231913
 URL: http://svn.freebsd.org/changeset/base/231913
 
 Log:
   - Probe BCM57780.
   - In case the parent is bge(4), don't set the Jumbo frame settings unless
     the MAC actually is Jumbo capable as otherwise the PHY might not have the
     corresponding registers implemented. This is also in line with what the
     Linux tg3 driver does.
   
   PR:		165032
   Submitted by:	Alexander Milanov
   Obtained from:	OpenBSD
   MFC after:	3 days
 
 Modified:
   head/sys/dev/mii/brgphy.c
   head/sys/dev/mii/miidevs
 
 Modified: head/sys/dev/mii/brgphy.c
 ==============================================================================
 --- head/sys/dev/mii/brgphy.c	Sun Feb 19 10:38:55 2012	(r231912)
 +++ head/sys/dev/mii/brgphy.c	Sun Feb 19 12:09:17 2012	(r231913)
 @@ -146,6 +146,7 @@ static const struct mii_phydesc brgphys[
  	MII_PHY_DESC(BROADCOM3, BCM5719C),
  	MII_PHY_DESC(BROADCOM3, BCM5720C),
  	MII_PHY_DESC(BROADCOM3, BCM57765),
 +	MII_PHY_DESC(BROADCOM3, BCM57780),
  	MII_PHY_DESC(xxBROADCOM_ALT1, BCM5906),
  	MII_PHY_END
  };
 @@ -225,7 +226,8 @@ brgphy_attach(device_t dev)
  				sc->mii_flags |= MIIF_HAVEFIBER;
  			}
  			break;
 -		} break;
 +		}
 +		break;
  	case MII_OUI_BROADCOM2:
  		switch (sc->mii_mpd_model) {
  		case MII_MODEL_BROADCOM2_BCM5708S:
 @@ -942,7 +944,8 @@ brgphy_reset(struct mii_softc *sc)
  		if (bge_sc->bge_phy_flags & BGE_PHY_JITTER_BUG)
  			brgphy_fixup_jitter_bug(sc);
  
 -		brgphy_jumbo_settings(sc, ifp->if_mtu);
 +		if (bge_sc->bge_flags & BGE_FLAG_JUMBO)
 +			brgphy_jumbo_settings(sc, ifp->if_mtu);
  
  		if ((bge_sc->bge_phy_flags & BGE_PHY_NO_WIRESPEED) == 0)
  			brgphy_ethernet_wirespeed(sc);
 
 Modified: head/sys/dev/mii/miidevs
 ==============================================================================
 --- head/sys/dev/mii/miidevs	Sun Feb 19 10:38:55 2012	(r231912)
 +++ head/sys/dev/mii/miidevs	Sun Feb 19 12:09:17 2012	(r231913)
 @@ -179,6 +179,7 @@ model BROADCOM2 BCM5784		0x003a BCM5784 
  model BROADCOM2 BCM5709C	0x003c BCM5709 10/100/1000baseT PHY
  model BROADCOM2 BCM5761		0x003d BCM5761 10/100/1000baseT PHY
  model BROADCOM2 BCM5709S	0x003f BCM5709S 1000/2500baseSX PHY
 +model BROADCOM3 BCM57780	0x0019 BCM57780 1000BASE-T media interface
  model BROADCOM3 BCM5717C	0x0020 BCM5717C 1000BASE-T media interface
  model BROADCOM3 BCM5719C	0x0022 BCM5719C 1000BASE-T media interface
  model BROADCOM3 BCM57765	0x0024 BCM57765 1000BASE-T media interface
 _______________________________________________
 svn-src-all@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/svn-src-all
 To unsubscribe, send any mail to "svn-src-all-unsubscribe@freebsd.org"
 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201202191210.q1JCA3Bh047074>