Date: Mon, 12 Aug 2019 22:49:48 +0200 From: =?utf-8?Q?S=C3=B8ren_Schmidt?= <soren.schmidt@gmail.com> To: Mit Matelske <mit@pt.net> Cc: tscho <johannes@t-beutel.com>, freebsd-arm@freebsd.org Subject: Re: Espressobin anyone ? Message-ID: <4A647617-EEC0-4A75-ADF6-3D3F553F9AFF@gmail.com> In-Reply-To: <532380450.3296650.1565636798211.JavaMail.zimbra@perftech.com> References: <E73AFF5D-43CA-41A7-BDBA-ADEF2D342479@deepcore.dk> <9B48E915-C705-4582-837B-C92B40AD63EB@westryn.net> <7CDBFAF1-C36F-4A2D-8D80-CFF1F03CD2B9@deepcore.dk> <CAB=2f8zcYRe0hTkMspgdixy2WFnxBtL1jF1FYBk09A8yb7c3Yw@mail.gmail.com> <44E733F9-5DEB-4A7C-8369-7F6DF2AE03BE@gmail.com> <49A81763-B197-4E66-BA8E-0804C680B842@gmail.com> <1565435583431-0.post@n6.nabble.com> <1F22D8DA-E583-4858-911F-F057EC1A30E0@gmail.com> <532380450.3296650.1565636798211.JavaMail.zimbra@perftech.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--Apple-Mail=_2B602E7C-002A-47DE-8ED2-24FE6117B489
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain;
charset=utf-8
Hi
Looks like your sources may be too old, you need to be at least at =
r348882 to get the fix for the SD card VCC regulator.
That change fixed it for me backported to 12-stable...
The currdev problem still exists, I have it hardwired in my loader for =
aarch64 :)
-S=C3=B8ren
> On 12 Aug 2019, at 21.06, Mit Matelske <mit@pt.net> wrote:
>=20
> I'm having a couple little hiccups booting this board also. One has =
been commented on already, that I can't get the loader to automatically =
start loading the kernel on "disk0p2"...
>=20
> The second, is that the kernel can't find the SD card after booting so =
it can't mount the root filesystem. I'm using the dts/dtb and kernel =
from the 13-current branch.
>=20
> Thanks for any and all help. I haven't used u-boot in about decade. =
Spoiled by the x86 platform.
>=20
> Mit Matelske
>=20
>=20
> ***U-boot environment:***
>=20
>=20
> Marvell>> printenv
> baudrate=3D115200
> bootargs=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000 =
root=3D/dev/mmcblk0p1 rw rootwait net.ifnames=3D0 biosdevname=3D0
> bootcmd=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload =
mmc 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> bootdelay=3D2
> bootmmc=3Dmmc dev 0; fatload mmc 0:1 $kernel_addr $image_name;fatload =
mmc 0:1 $fdt_addr $fdt_name; bootefi $kernel_addr $fdt_addr
> console=3Dconsole=3DttyMV0,115200 earlycon=3Dar3700_uart,0xd0012000
> eth1addr=3D00:51:82:11:22:01
> eth2addr=3D00:51:82:11:22:02
> eth3addr=3D00:51:82:11:22:03
> ethact=3Dneta@30000
> ethaddr=3DF0:AD:4E:09:6B:8F
> ethprime=3Deth0
> fdt_addr=3D0x4f00000
> fdt_high=3D0xffffffffffffffff
> fdt_name=3Defi/boot/armada-3720-espressobin.dtb
> fdtcontroladdr=3D3f7161b8
> gatewayip=3D10.4.50.254
> get_images=3Dtftpboot $kernel_addr $image_name; tftpboot $fdt_addr =
$fdt_name; run get_ramfs
> get_ramfs=3Dif test "${ramfs_name}" !=3D "-"; then setenv ramfs_addr =
0x8000000; tftpboot $ramfs_addr $ramfs_name; else setenv ramfs_addr -;fi
> hostname=3Dmarvell
> image_name=3Defi/freebsd/loader.efi
> initrd_addr=3D0xa00000
> initrd_size=3D0x2000000
> ipaddr=3D0.0.0.0
> kernel_addr=3D0x5000000
> loadaddr=3D0x5000000
> netdev=3Deth0
> netmask=3D255.255.255.0
> ramfs_addr=3D0x8000000
> ramfs_name=3D-
> root=3Droot=3D/dev/nfs rw
> rootpath=3D/srv/nfs/
> serverip=3D0.0.0.0
> set_bootargs=3Dsetenv bootargs $console $root =
ip=3D$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:none =
nfsroot=3D$serverip:$rootpath $extra_params
> stderr=3Dserial@12000
> stdin=3Dserial@12000
> stdout=3Dserial@12000
>=20
>=20
> ***Full boot logs:***
>=20
>=20
> U-Boot 2017.03-armada-17.10.2-g14aeedc (Jun 01 2018 - 15:39:10 +0800)
>=20
> Model: Marvell Armada 3720 Community Board ESPRESSOBin
> CPU @ 1000 [MHz]
> L2 @ 800 [MHz]
> TClock @ 200 [MHz]
> DDR @ 800 [MHz]
> DRAM: 1 GiB
> U-Boot DT blob at : 000000003f7161b8
> Comphy-0: USB3 5 Gbps
> Comphy-1: PEX0 2.5 Gbps
> Comphy-2: SATA0 6 Gbps
> SATA link 0 timeout.
> AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
> flags: ncq led only pmp fbss pio slum part sxs
> PCIE-0: Link down
> MMC: sdhci@d0000: 0, sdhci@d8000: 1
> SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB, =
total 4 MiB
> Net: eth0: neta@30000 [PRIME]
> Hit any key to stop autoboot: 0
> switch to partitions #0, OK
> mmc0 is current device
> reading efi/freebsd/loader.efi
> 603872 bytes read in 49 ms (11.8 MiB/s)
> reading efi/boot/armada-3720-espressobin.dtb
> 15946 bytes read in 17 ms (916 KiB/s)
> ## Starting EFI application at 05000000 ...
> Scanning disk sdhci@d0000.blk...
> Card did not respond to voltage select!
> mmc_init: -95, time 50
> Found 1 disks
> Consoles: EFI console
> FreeBSD/arm64 EFI loader, Revision 1.1
>=20
> Command line arguments: loader.efi
> EFI version: 2.05
> EFI Firmware: Das U-boot (rev 0.00)
> Console: efi (0)
> Failed to find bootable partition
> Startup error in /boot/lua/loader.lua: seconds
> LUA ERROR: cannot open /boot/lua/loader.lua: invalid argument.
>=20
> can't load 'kernel'
>=20
> Type '?' for a list of commands, 'help' for more detailed help.
> OK
> OK set currdev=3Ddisk0p2
> OK boot
>=20
> /boot/kernel/kernel text=3D0x97d6a0 data=3D0x191b50+0x84ae94 =
syms=3D[0x8+0x137dd8+0x8+0x126260]
> Using DTB provided by EFI at 0x8000000.
> ---<<BOOT>>---
> KDB: debugger backends: ddb
> KDB: current backend: ddb
> Copyright (c) 1992-2019 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, =
1994
> The Regents of the University of California. All rights =
reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 13.0-CURRENT GENERIC arm64
> FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on =
LLVM 6.0.1)
> WARNING: WITNESS option enabled, expect reduced performance.
> VT: init without driver.
> Starting CPU 1 (1)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> arc4random: WARNING: initial seeding bypassed the cryptographic random =
device because it was not yet seeded and the knob =
'bypass_before_seeding' was enabled.
> random: entropy device external interface
> MAP 3e681000 mode 2 pages 1
> MAP 3ffa6000 mode 2 pages 1
> kbd0 at kbdmux0
> ofwbus0: <Open Firmware Device Tree>
> simplebus0: <Flattened device tree simple bus> on ofwbus0
> simplebus1: <Flattened device tree simple bus> on simplebus0
> simple_mfd0: <Simple MFD (Multi-Functions Device)> mem =
0x13800-0x138ff,0x13c00-0x13c1f on simplebus1
> simple_mfd1: <Simple MFD (Multi-Functions Device)> mem =
0x18800-0x188ff,0x18c00-0x18c1f on simplebus1
> psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
> gic0: <ARM Generic Interrupt Controller v3.0> mem =
0x1d00000-0x1d0ffff,0x1d40000-0x1d7ffff,0x1d80000-0x1d81fff,0x1d90000-0x1d=
91fff,0x1da0000-0x1dbffff irq 27 on simplebus1
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem =
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 =
on simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem =
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
> Timecounter "ARM MPCore Timecounter" frequency 12500000 Hz quality =
1000
> Event timer "ARM MPCore Eventtimer" frequency 12500000 Hz quality 1000
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem =
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 =
on simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem =
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem =
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 =
on simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem =
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem =
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 =
on simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem =
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem =
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 =
on simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem =
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> cpulist0: <Open Firmware CPU Group> on ofwbus0
> cpu0: <Open Firmware CPU> on cpulist0
> cpu1: <Open Firmware CPU> on cpulist0
> pmu0: <Performance Monitoring Unit> irq 4 on ofwbus0
> syscon_generic0: <syscon> mem 0xd000-0xdfff on simplebus1
> syscon_generic1: <syscon> mem 0x11500-0x1153f on simplebus1
> uart0: <Marvell Armada 3700 UART> mem 0x12000-0x121ff irq 9,10,11 on =
simplebus1
> uart0: console (115200,n,8,1)
> gpio0: <Armada 37x0 North Bridge GPIO Controller> mem =
0x13800-0x138ff,0x13c00-0x13c1f irq 28,29,30,31,32,33,34,35,36,37,38,39 =
on simple_mfd0
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> syscon_generic2: <syscon> mem 0x14000-0x1405f on simplebus1
> gpio0: <Armada 37x0 South Bridge GPIO Controller> mem =
0x18800-0x188ff,0x18c00-0x18c1f irq 40,41,42,43,44 on simple_mfd1
> gpio0: cannot allocate memory window
> device_attach: gpio0 attach returned 6
> mvneta0: <NETA controller> mem 0x30000-0x33fff irq 14 on simplebus1
> mvneta0: version is 10
> mvneta0: Ethernet address: 00:a6:39:ca:e8:00
> mdio0: <MDIO> on mvneta0
> mdioproxy0: <MII/MDIO proxy, MDIO side> on mdio0
> e6000sw0: <Marvell 88E6341> on mdio0
> e6000sw0: multi-chip addressing mode (0x1)
> e6000sw0: CPU port at 0
> e6000sw0: fixed port at 0
> e6000sw0: PHY at port 1
> miibus0: <MII bus> on e6000sw0
> e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus0
> e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, =
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> e6000sw0: PHY at port 2
> miibus1: <MII bus> on e6000sw0
> e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus1
> e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, =
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> e6000sw0: PHY at port 3
> miibus2: <MII bus> on e6000sw0
> e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus2
> e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, =
1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto
> e6000sw0: switch is ready.
> etherswitch0: <Switch controller> on e6000sw0
> xhci0: <Generic USB 3.0 controller> mem 0x58000-0x5bfff irq 16 on =
simplebus1
> xhci0: 32 bytes context size, 32-bit DMA
> usbus0 on xhci0
> syscon_generic3: <syscon> mem 0x5d800-0x5dfff on simplebus1
> ehci0: <Marvell Integrated USB 2.0 controller> mem 0x5e000-0x5efff irq =
17 on simplebus1
> usbus1: EHCI version 1.0
> usbus1 on ehci0
> syscon_generic4: <syscon> mem 0x5f800-0x5ffff on simplebus1
> sdhci_xenon0: <Armada Xenon SDHCI controller> mem =
0xd0000-0xd02ff,0x1e808-0x1e80b irq 24 on simplebus1
> ahci0: <AHCI SATA controller> mem 0xe0000-0xe0177 irq 26 on simplebus1
> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported with =
FBS
> ahcich0: <AHCI channel> at channel 0 on ahci0
> device_attach: ahcich0 attach returned 6
> gpioregulator0: <GPIO controlled regulator> on ofwbus0
> gpioregulator0: cannot get pin 0
> gpioregulator0: cannot parse parameters
> device_attach: gpioregulator0 attach returned 6
> cryptosoft0: <software crypto>
> Timecounters tick every 1.000 msec
> mvneta0: link state changed to UP
> e6000sw0port1: link state changed to DOWN
> e6000sw0port2: link state changed to DOWN
> e6000sw0port3: link state changed to DOWN
> usbus0: 5.0Gbps Super Speed USB v3.0
> usbus1: 480Mbps High Speed USB v2.0
> Release APs...done
> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
> Instruction Set Attributes 0 =3D <CRC32,SHA2,SHA1,AES+PMULL>
> Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
> Instruction Set Attributes 1 =3D <>
> Root mount waiting for: Processor Features 0 =3D =
<GIC,AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> usbus1 Processor Features 1 =3D <0>
> usbus0 Memory Model Features 0 =3D <4k Granule,64k Granule,S/NS =
Mem,MixedEndian,16bit ASID,1TB PA>
>=20
> Memory Model Features 1 =3D <>
> Memory Model Features 2 =3D <32b CCIDX,48b VA>
> Debug Features 0 =3D <2 CTX Breakpoints,4 Watchpoints,6 =
Breakpoints,PMUv3,Debug v8>
> Debug Features 1 =3D <0>
> Auxiliary Features 0 =3D <0>
> Auxiliary Features 1 =3D <0>
> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
> WARNING: WITNESS option enabled, expect reduced performance.
> ugen0.1: <Generic XHCI root HUB> at usbus0
> ugen1.1: <Marvell EHCI root HUB> at usbus1
> uhub0 on usbus0
> uhub1 on usbus1
> uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on =
usbus0
> uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on =
usbus1
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 1 port with 1 removable, self powered
> mountroot: waiting for device /dev/ufs/FreeBSD_Install...
> Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19.
>=20
> Loader variables:
> vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install
> vfs.root.mountfrom.options=3Dro,noatime
>=20
> Manual root filesystem specification:
> <fstype>:<device> [options]
> Mount <device> using filesystem <fstype>
> and with the specified (optional) option list.
>=20
> eg. ufs:/dev/da0s1a
> zfs:zroot/ROOT/default
> cd9660:/dev/cd0 ro
> (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
>=20
> ? List valid disk boot devices
> . Yield 1 second (for background tasks)
> <empty line> Abort manual input
>=20
> mountroot> ?
>=20
> List of GEOM managed disk devices:
>=20
>=20
> mountroot>
--Apple-Mail=_2B602E7C-002A-47DE-8ED2-24FE6117B489
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
filename=signature.asc
Content-Type: application/pgp-signature;
name=signature.asc
Content-Description: Message signed with OpenPGP
-----BEGIN PGP SIGNATURE-----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=ifJY
-----END PGP SIGNATURE-----
--Apple-Mail=_2B602E7C-002A-47DE-8ED2-24FE6117B489--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A647617-EEC0-4A75-ADF6-3D3F553F9AFF>