Date: Wed, 01 Dec 2004 20:28:55 +0100 From: Roger Olofsson <raggen@passagen.se> To: freebsd-current@freebsd.org Subject: 6.0-CURRENT and ATAPI_IDENTIFY timed out and VIA MVP3 Message-ID: <3.0.32.20041201202852.0119a510@m1.431.telia.com>
next in thread | raw e-mail | index | archive | help
Greetings from Sweden, I've been trying to find more information about the fact that one ata channel has stopped working after I upgraded from 5.2.1-p9 to 6.0 #0. The error comes when booting and looks like this: Dec 1 19:53:25 scomber kernel: ata1-slave: FAILURE - ATAPI_IDENTIFY timed out Dec 1 19:53:30 scomber kernel: ata1-slave: FAILURE - ATAPI_IDENTIFY timed out Dec 1 19:53:35 scomber kernel: ata1-master: FAILURE - ATA_IDENTIFY timed out Dec 1 19:53:40 scomber kernel: ata1-master: FAILURE - ATA_IDENTIFY timed out Needless to say both devices attached to ata1 (cdrom and HD) were found and working fine in 5.2.1-p9. I've tried replacing the cdrom and HD with others and combinations of them but all give same result. Bios finds cdrom and HD fine. When I run atacontrol list I get the following: scomber# atacontrol list ATA channel 0: Master: ad0 <FUJITSU MPB3064ATU E/4010> ATA/ATAPI revision 3 Slave: ad1 <ST36422A/3.05> ATA/ATAPI revision 4 ATA channel 1: Master: no device present Slave: no device present And atacontrol reinit 1 gives: scomber# atacontrol reinit 1 Master: no device present Slave: no device present My motherboard is an old Shuttle HOT-591p and has VIA MVP3 chipset for 2 ultra33 dma ide. I would be very grateful for any kinds of leads on solving this problem. It feels terrible to have a 'crippled' FreeBSD. Please answer to my email raggen@passagen.se.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.32.20041201202852.0119a510>