From owner-freebsd-stable Fri Nov 10 3:27:12 2000 Delivered-To: freebsd-stable@freebsd.org Received: from scribe.pobox.com (scribe.pobox.com [208.210.124.35]) by hub.freebsd.org (Postfix) with ESMTP id 53C5937B479 for ; Fri, 10 Nov 2000 03:27:05 -0800 (PST) Received: from pobox.com (unknown [207.8.144.30]) by scribe.pobox.com (Postfix) with ESMTP id E84883258C for ; Fri, 10 Nov 2000 06:26:01 -0500 (EST) Message-ID: <3A0BDB4C.37BAE939@pobox.com> Date: Fri, 10 Nov 2000 06:26:04 -0500 From: Jamil Taylor X-Mailer: Mozilla 4.76 [en] (X11; U; FreeBSD 4.2-BETA i386) X-Accept-Language: en MIME-Version: 1.0 To: stable@FREEBSD.ORG Subject: CDROM Issues with Stable Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG I've noticed people losing access to their CD-ROM with stable. Well, I just upgraded from 4.1.1 Stable to 4.2 Beta, and lost my ATAPI CD-ROM as well. In checking dmesg output, it appears the USB controller is using the same IRQ that the IDE controller uses. Perhaps this has something to do with the problem? TIA uname -rsm FreeBSD 4.2-BETA i386 dmesg Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-BETA #1: Thu Nov 9 23:39:36 EST 2000 jamil@netaxs.com:/usr/src/sys/compile/STANDARD Timecounter "i8254" frequency 1193182 Hz CPU: AMD Athlon(tm) Processor (952.16-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x622 Stepping = 2 Features=0x183f9ff AMD Features=0xc0400000 real memory = 536870912 (524288K bytes) config> di bt0 config> di aic0 config> di aha0 config> di adv0 config> q avail memory = 517492736 (505364K bytes) Preloaded elf kernel "kernel" at 0xc042a000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc042a09c. Preloaded elf module "splash_bmp.ko" at 0xc042a0ec. Preloaded splash_image_data "/boot/splash.bmp" at 0xc042a190. Preloaded elf module "vesa.ko" at 0xc042a1e0. VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc00c6a0b (c0006a0b) VESA: Matrox Graphics Inc. Pentium Pro MTRR support enabled md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 pcib2: at device 1.0 on pci0 pci1: on pcib2 pci1: at 0.0 irq 11 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xc000-0xc00f at device 7.1 on pci0 uhci0: port 0xc400-0xc41f irq 14 at device 7.2 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2 uhub1: 4 ports with 4 removable, bus powered uhid0: Microsoft Microsoft SideWinder Precision Pro (USB), rev 1.00/1.00, addr 3, iclass 3/0 ums0: AIPTEK APT-6000U, rev 1.00/1.00, addr 4, iclass 3/1 ums0: 7 buttons ugen0: 3Com 3Com HomeConnect USB Camera , rev 1.00/1.06, addr 5 ahc0: port 0xcc00-0xccff mem 0xdb004000-0xdb004fff irq 11 at device 8.0 on pci0 aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs sym0: <1010-33> port 0xd000-0xd0ff mem 0xdb000000-0xdb001fff,0xdb006000-0xdb0063ff irq 10 at device 9.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: SCAN AT BOOT disabled for targets 3 4 5 8 9 10 11 12 13 14 15. sym0: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15. sym1: <1010-33> port 0xd400-0xd4ff mem 0xdb002000-0xdb003fff,0xdb005000-0xdb0053ff irq 10 at device 9.1 on pci0 sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: SCAN AT BOOT disabled for targets 0 1 2 3 6 8 9 10 11 12 13 14 15. sym1: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15. pcm0: port 0xd800-0xd81f irq 5 at device 10.0 on pci0 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem 0xdb007000-0xdb00707f irq 14 at device 11.0 on pci0 xl0: Ethernet address: 00:01:02:3c:58:8c miibus0: on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bktr0: mem 0xdb008000-0xdb008fff irq 14 at device 12.0 on pci0 bktr0: Hauppauge Model 61381 D423 bktr0: Detected a MSP3430G-A4 at 0x80 bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c stereo, remote control. pci0: (vendor=0x109e, dev=0x0878) at 12.1 irq 14 pcib1: on motherboard pci2: on pcib1 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: IEEE1284 device found /NIBBLE/ECP Probing for PnP devices on ppbus0: ppbus0: PCL,MLC,PML lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 Waiting 9 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. sa0 at sym0 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI-3 device sa0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit) pass0 at ahc0 bus 0 target 3 lun 0 pass0: Fixed Processor SCSI-2 device pass0: 3.300MB/s transfers Mounting root from ufs:/dev/da0s3a da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da2 at sym0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-3 device da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da1 at sym0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged Queueing Enabled da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) da3 at sym1 bus 0 target 5 lun 0 da3: Removable Optical SCSI-2 device da3: 10.000MB/s transfers (10.000MHz, offset 15) da3: 217MB (446325 512 byte sectors: 64H 32S/T 217C) cd0 at sym1 bus 0 target 4 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 15) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message