Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 8 Jan 2008 20:49:22 GMT
From:      Sam Leffler <sam@FreeBSD.org>
To:        Perforce Change Reviews <perforce@freebsd.org>
Subject:   PERFORCE change 132812 for review
Message-ID:  <200801082049.m08KnMPb022227@repoman.freebsd.org>

next in thread | raw e-mail | index | archive | help
http://perforce.freebsd.org/chv.cgi?CH=132812

Change 132812 by sam@sam_ebb on 2008/01/08 20:48:35

	(blindly) remove awi per discussion a few weeks back

Affected files ...

.. //depot/projects/vap/sys/conf/NOTES#6 edit
.. //depot/projects/vap/sys/conf/files#9 edit
.. //depot/projects/vap/sys/dev/awi/am79c930.c#5 delete
.. //depot/projects/vap/sys/dev/awi/am79c930reg.h#3 delete
.. //depot/projects/vap/sys/dev/awi/am79c930var.h#3 delete
.. //depot/projects/vap/sys/dev/awi/awi.c#7 delete
.. //depot/projects/vap/sys/dev/awi/awireg.h#3 delete
.. //depot/projects/vap/sys/dev/awi/awivar.h#6 delete
.. //depot/projects/vap/sys/dev/awi/if_awi_pccard.c#5 delete
.. //depot/projects/vap/sys/modules/Makefile#8 edit
.. //depot/projects/vap/sys/modules/awi/Makefile#5 delete

Differences ...

==== //depot/projects/vap/sys/conf/NOTES#6 (text+ko) ====

@@ -689,7 +689,7 @@
 #  according to IEEE 802.1Q.  It requires `device miibus'.
 #  The `wlan' device provides generic code to support 802.11
 #  drivers, including host AP mode; it is MANDATORY for the wi,
-#  ath, and awi drivers and will eventually be required by all 802.11 drivers.
+#  and ath drivers and will eventually be required by all 802.11 drivers.
 #  The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide
 #  support for WEP, TKIP, and AES-CCMP crypto protocols optionally
 #  used with 802.11 devices that depend on the `wlan' module.
@@ -1726,8 +1726,6 @@
 
 # an:   Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
 #       PCI and ISA varieties.
-# awi:  Support for IEEE 802.11 PC Card devices using the AMD Am79C930 and
-#       Harris (Intersil) Chipset with PCnetMobile firmware by AMD.
 # bce:	Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet
 #       adapters.
 # bfe:	Broadcom BCM4401 Ethernet adapter.
@@ -1862,7 +1860,6 @@
 hint.sn.0.port="0x300"
 hint.sn.0.irq="10"
 device		an
-device		awi
 device		cnw
 device		wi
 device		xe

==== //depot/projects/vap/sys/conf/files#9 (text+ko) ====

@@ -482,9 +482,6 @@
 	compile-with "${NORMAL_C} -I$S/dev/ath"
 dev/ath/if_ath_pci.c		optional ath pci \
 	compile-with "${NORMAL_C} -I$S/dev/ath"
-dev/awi/am79c930.c		optional awi
-dev/awi/awi.c			optional awi
-dev/awi/if_awi_pccard.c		optional awi pccard
 dev/bce/if_bce.c		optional bce
 dev/bfe/if_bfe.c		optional bfe
 dev/bge/if_bge.c		optional bge

==== //depot/projects/vap/sys/modules/Makefile#8 (text+ko) ====

@@ -33,7 +33,6 @@
 	${_ath_rate_sample} \
 	aue \
 	${_auxio} \
-	${_awi} \
 	axe \
 	bce \
 	bfe \
@@ -368,7 +367,6 @@
 _ath_rate_amrr=	ath_rate_amrr
 _ath_rate_onoe=	ath_rate_onoe
 _ath_rate_sample=ath_rate_sample
-_awi=		awi
 _bktr=		bktr
 _cardbus=	cardbus
 _cbb=		cbb



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200801082049.m08KnMPb022227>