Date: 17 Feb 2002 02:20:51 -0500 From: Javier Frias <j@jfns.net> To: freebsd-questions@FreeBSD.org Cc: freebsd-stable@FreeBSD.org Subject: XFree86 4.2.0 + Asus A7A266 + Geoforce 2 Pro = No Go Message-ID: <1013930452.6346.19.camel@wolverine.jfns.net>
next in thread | raw e-mail | index | archive | help
This is a known problem, but so far in all my searches all I find are complains from people and no solutions. Basically, anytime XFree86 4 ( and the version really doesn't matter, I've tried it with 4.1.x and 4.2.0 ) loads the nv driver, the machines locks up for a few seconds, then reboots. I was able to get a working config from the system by removing libint10.a from the xfree directory, but any attempt at then running the xserver with the new config has the same effect.. BTW, Xfree86 3.3.6 works, but since it's unaccelerated... it's slow as molasses... and i've tried various versions of FreeBSD 4.3-4.5. Anyone have any info? or should i just give up another card for this system? ( but i've heard that even Radeons have the same issue.. ( btw, i also get that damn microuptime() went backwards.. a few hundred times a day, is this ALI chipset THAT BAD..., the board seems other wise stable) here's the output of pciconf __SNIP__ chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x164710b9 rev=0x04 hdr=0x00 pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x524710b9 rev=0x00 hdr=0x01 ohci0@pci0:2:0: class=0x0c0310 card=0x523710b9 chip=0x523710b9 rev=0x03 hdr=0x00 atapci0@pci0:4:0: class=0x0101fa card=0x80531043 chip=0x522910b9 rev=0xc4 hdr=0x00 pcm0@pci0:5:0: class=0x040100 card=0x80e21043 chip=0x011113f6 rev=0x10 hdr=0x00 ohci1@pci0:6:0: class=0x0c0310 card=0x523710b9 chip=0x523710b9 rev=0x03 hdr=0x00 isab0@pci0:7:0: class=0x060100 card=0x153310b9 chip=0x153310b9 rev=0x00 hdr=0x00 fxp0@pci0:11:0: class=0x020000 card=0x000c8086 chip=0x12298086 rev=0x08 hdr=0x00 chip1@pci0:17:0: class=0x068000 card=0x00000000 chip=0x710110b9 rev=0x00 hdr=0x00 none0@pci1:0:0: class=0x030000 card=0x815a1462 chip=0x015010de rev=0xa4 hdr=0x00 __END__ and the part of the XFree log where it stops... __SNIP__ (II) Setting vga for screen 0. (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) NV(0): initializing int10 __END__ -Javier To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1013930452.6346.19.camel>