Date: Fri, 9 Oct 2015 00:08:52 -0700 From: Adrian Chadd <adrian.chadd@gmail.com> To: Eugene Grosbein <eugen@grosbein.net> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: Initial flashing for TPLink TL WDR3600 Message-ID: <CAJ-VmomnNTZSMRuU-zTjqr=oUWYc_GkS6_pQ0WDrDKxcMkj=sA@mail.gmail.com> In-Reply-To: <56176752.5000803@grosbein.net> References: <CAJ-VmokxzBVVASyWNQnPTn%2B3GPH6DKSq67S5nHK9tuEydV6oTg@mail.gmail.com> <5614D073.9060706@riseup.net> <5614E36E.6000803@grosbein.net> <CAJ-Vmo=z7PgS8o5Bq-35QSorDPdj=rpac82Lq6a_bekrCkfdVA@mail.gmail.com> <5615F57E.1010405@riseup.net> <5615F697.6080700@riseup.net> <CAJ-VmomPM40c0GS=Dmb-%2B%2BTVHFD195XuW3XYsVpQnxSC=SE_CQ@mail.gmail.com> <5616AA5B.8030609@grosbein.net> <5616B9F0.3030002@grosbein.net> <CAJ-Vmok70r8nJv2hfGjzL6S-cE-E68bn9866GLzUm1sNDCcwyg@mail.gmail.com> <56176752.5000803@grosbein.net>
next in thread | previous in thread | raw e-mail | index | archive | help
hi, Right. You can follow the reflashing instructions now on the wiki. Build the wdr3600 target and it'll spit out a factory image. Just do this verbatim: https://github.com/freebsd/freebsd-wifi-build/wiki/TPLink-TL-WDR3600 .. and it should just work(tm) -adrian (talking to you from one of these very units.) On 9 October 2015 at 00:05, Eugene Grosbein <eugen@grosbein.net> wrote: > On 09.10.2015 05:08, Adrian Chadd wrote: >> you may have just bricked the firmware :( Yeah, get a serial cable and >> see what it's printing out. > > It prints: > >> U-Boot 1.1.4 (Jun 5 2015 - 14:14:34) >> >> U-boot DB120 >> >> >> DRAM: 128 MB >> id read 0x100000ff >> flash size 8MB, sector count = 128 >> Flash: 8 MB >> Using default environment >> >> PCIe Reset OK!!!!!! >> In: serial >> Out: serial >> Err: serial >> Net: ag934x_enet_initialize... >> No valid address in Flash. Using fixed address >> wasp reset mask:c03300 >> WASP ----> S17 PHY * >> : cfg1 0x7 cfg2 0x7114 >> eth0: ba:be:fa:ce:08:41 >> athrs17_reg_init: complete >> eth0 up >> eth0 >> Autobooting in 1 seconds >> ## Booting image at 9f020000 ... >> Uncompressing Kernel Image ... Too big uncompressed streamLZMA ERROR 1 - must RESET board to recover > > And then it cycles. > > Meantime, I've recovered the device to older stock firmware using cable > and then to latest firmware using TFTP client. > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmomnNTZSMRuU-zTjqr=oUWYc_GkS6_pQ0WDrDKxcMkj=sA>