Date: Fri, 21 Jan 2005 19:18:47 -0600 From: Bryan Bunch <bbunch@gmail.com> To: freebsd-current@freebsd.org Subject: WPA with ath Message-ID: <a651cd6f05012117183fead6df@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hello All,
I am having a little trouble getting my WiFi card to work properly.
--Card - Netgear WGS511T
-- I am running FreeBSD 6.0-CURRENT #0: Fri Jan 21 16:03:10 CST 2005 .
-- The latest port of wpa_supplicant.
My kernel has the following necessary lines:
# Wireless NIC cards
device wlan # 802.11 support
device ath
device ath_hal
device ath_rate_onoe
Below is the process I am using:
-- Boot machine
-- kldload wlan_tkip
-- Put card in PCMCIA slot and I get the message saying that it sees the card.
-- do a ifconfig ath0 up
-- wpa_supplicant -iath0 -c /usr/local/etc/wpa_supplicant.conf
Below is some of the output I get:
=========================
Trying to associate with 00:0c:41:f3:bd:a2 (SSID='1024' freq=2437 MHz)
Associated with 00:0c:41:f3:bd:a2
WPA: Key negotiation completed with 00:0c:41:f3:bd:a2 [PTK=TKIP GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
Disconnect event - remove keys
Associated with 00:0c:41:f3:bd:a2
WPA: Key negotiation completed with 00:0c:41:f3:bd:a2 [PTK=TKIP GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
Disconnect event - remove keys
Associated with 00:0c:41:f3:bd:a2
WPA: Key negotiation completed with 00:0c:41:f3:bd:a2 [PTK=TKIP GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
WPA: Group rekeying completed with 00:0c:41:f3:bd:a2 [GTK=TKIP]
=============================
I keep getting the same thing over and over. I'm assuming it's working
since if I go to a terminal window and do a ifconfig, I get:
==================
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::209:5bff:fec8:2255%ath0 prefixlen 64 scopeid 0x4
ether 00:09:5b:c8:22:55
media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps)
status: associated
ssid 1024 channel 6 bssid 00:0c:41:f3:bd:a2
authmode WPA1+WPA2/802.11i privacy ON deftxkey 1
TKIP 1:128-bit <0a718f0eeaef5e32086fcccaca5ba6ba> rsc 3 tsc 1
TKIP 3:128-bit <86d5577cc68329ad2fb6f9e7a212fb49> rsc 16 tsc 1
txpowmax 43 protmode CTS roaming MANUAL bintval 100
==================
BUT when I try and do a:
ifconfig ath0 inet 192.168.1.40 netmask 255.255.255.0
The address appears under the ifconfig, but I cannot go anywhere. I
can ping the local interface, but nothing outside of it.
What am I doing wrong?
Thanks for any help/guidance.
Bryan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?a651cd6f05012117183fead6df>