From owner-freebsd-questions Thu Oct 9 09:24:49 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id JAA09714 for questions-outgoing; Thu, 9 Oct 1997 09:24:49 -0700 (PDT) (envelope-from owner-freebsd-questions) Received: from cdale3.midwest.net (root@cdale3.midwest.net [204.248.40.16]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA09705 for ; Thu, 9 Oct 1997 09:24:44 -0700 (PDT) (envelope-from parrothd@midwest.net) Received: from techie (ws2.c-ag.siu.edu [131.230.82.2]) by cdale3.midwest.net (8.8.7/8.8.5) with SMTP id KAA07011; Thu, 9 Oct 1997 10:51:28 -0500 (CDT) Message-ID: <343D051B.68B9@midwest.net> Date: Thu, 09 Oct 1997 11:23:55 -0500 From: Jon Lyons Reply-To: parrothd@midwest.net X-Mailer: Mozilla 3.02 (WinNT; I) MIME-Version: 1.0 To: Kai Schmidt CC: freebsd-questions@FreeBSD.ORG Subject: Re: Install Free-BSD with Buslogic SCIS References: <97100916040175900@mail.edirekt-imt.de> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Is the older buslogic supported? I pulled this list of the FAQ, so it may be a little out dated.... Is the card EISA? Buslogic BT-445 Series (this is one of the cards referred to in the section on >16 MB machines) BT-545 Series BT-742 Series BT-747 Series BT-946 Series BT-956 Series Kai Schmidt wrote: > > Hi, > > I spent whole the night yesterday trying to manage an installation with an > older Buslogig SCSI controler. The system setup screen came up but no HD > was found. I configured all the hardware devices but I was unable to > configure the IRQ for the SCSI. > > What am I doing wrong ? > > I checked with a Linux installation ( just to ensure that the controler > works) and it worked fine. > > Regards > > Kai Schmidt