Date: Mon, 25 Nov 2002 03:09:48 +0100 From: Tilman Linneweh <tilman@arved.de> To: freebsd-current@FreeBSD.org Cc: arved@FreeBSD.org Subject: reproducable panic with todays current. and xl0 NIC Message-ID: <20021125030948.7ce27adc.tilman@arved.de>
next in thread | raw e-mail | index | archive | help
--=.LcxOUg4yPanid'
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Hi,
I can reproducable panic todays CURRENT by running ifconfig xl0 up
(My rl0 NIC works fine). The xl0 NIC works on STABLE.
Any help/ideas appreciated.
regards
tilman
polly# ifconfig xl0 up
panic: invalid ife->ifm_data (0x6000) in mii_phy_setmedia
Debugger("panic")
Stopped at Debugger+0x54: xchgl %ebx,in_Debugger.0
db> tr
Debugger(c03ce03a,c0459e20,c03afc98,cfc7185c,1) at Debugger+0x54
panic(c03afc98,6000,c0d34f00,c1f2879c,cf52f000) at panic+0xab
mii_phy_setmedia(c1f2f540,c1f281a8,c1f2f540,c1f2f6c0,cfc718c8) at mii_phy_setmedia+0x99
exphy_service(c1f2f540,c1f2f6c0,2,cf52f800,c1f28000) at exphy_service+0x56
mii_mediachg(c1f2f6c0,246,cfc71900,c1f2f6c0,c1f28000) at mii_mediachg+0x32
xl_init(c1f28000,c03cc50a,cc,8020690c,c1f28000) at xl_init+0x673
ether_ioctl(c1f28000,8020690c,c2277400,c042d100,c2277400) at ether_ioctl+0x70
xl_ioctl(c1f28000,8020690c,c2277400,0,cfc71b04) at xl_ioctl+0x1e3
in6_ifinit(c1f28000,c2277400,cfc71aac,1,c0256894) at in6_ifinit+0xa5
in6_update_ifa(c1f28000,cfc71a9c,0,c0273ffb,cfc71a50) at in6_update_ifa+0x4aa
in6_ifattach_linklocal(c1f28000,0,c0256894,c02d7c00,cfc71b64) at in6_ifattach_linklocal+0x124
in6_ifattach(c1f28000,0,0,0,0) at in6_ifattach+0x208
in6_if_up(c1f28000,c1f2527c) at in6_if_up+0x1b
if_route(c1f28000,1,0,cfc71bd0,c02b65a3) at if_route+0x67
if_up(c1f28000,515,0,cfc71c00,8803) at if_up+0x21
ifhwioctl(80206910,c1f28000,cfc71c54,c22952a0,c045cf18) at ifhwioctl+0x273
ifioctl(c209a200,80206910,cfc71c54,c22952a0,c2296418) at ifioctl+0xe4
soo_ioctl(c201e4b0,80206910,cfc71c54,c22c4300,c22952a0) at soo_ioctl+0x19c
ioctl(c22952a0,cfc71d10,c03ebf3a,407,3) at ioctl+0x4b6
syscall(2f,2f,2f,3,1) at syscall+0x28e
Xint0x80_syscall() at Xint0x80_syscall+0x1d
--- syscall (54, FreeBSD ELF32, ioctl), eip = 0x804f967, esp = 0xbfbffa5c, ebp = 0xbfbffaa8 ---
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Nov 25 03:19:33 CET 2002
root@polly.arved.de:/usr/obj/usr/src/sys/POLLY
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0584000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05840a8.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 400910740 Hz
CPU: AMD-K6(tm) 3D processor (400.91-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0xffffffff80000800<SYSCALL,3DNow!>
real memory = 201310208 (191 MB)
avail memory = 189706240 (180 MB)
Initializing GEOMetry subsystem
K6-family MTRR support enabled (2 registers)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P5A > on motherboard
Using $PIR table, 8 entries at 0xc00f0d00
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xec08-0xec0b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.1
\_SB_.LNKC irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.2
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.3
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\_SB_.LNKC irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.1
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.2
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.3
\_SB_.LNKC irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.0
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.2
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.3
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.2
\_SB_.LNKC irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.3
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.2
\_SB_.LNKC irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.3
\_SB_.LNKE irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.2
\_SB_.LNKC irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.3
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.1
\_SB_.LNKC irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.2
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.3
\_SB_.LNKC irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.2
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.3
---- before setting priority for links ------------
\_SB_.LNKC:
interrupts: 1 3 4 5 6 7 9 10 11 12 14 15
penalty: 100990 1990 1990 990 1990 1990 1690 1790 1790 1990 10990 10990
references: 8
priority: 0
\_SB_.LNKE:
interrupts: 1 3 4 5 6 7 9 10 11 12 14 15
penalty: 100990 1990 1990 990 1990 1990 1690 1790 1790 1990 10990 10990
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\_SB_.LNKC:
interrupts: 1 3 4 5 6 7 9 10 11 12 14 15
penalty: 100990 1990 1990 990 1990 1990 1690 1790 1790 1990 10990 10990
references: 8
priority: 92786
\_SB_.LNKE:
interrupts: 1 3 4 5 6 7 9 10 11 12 14 15
penalty: 100990 1990 1990 990 1990 1990 1690 1790 1790 1990 10990 10990
references: 1
priority: 11598
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.1
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.2
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.3
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.1
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.2
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.3
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.0
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.2
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.3
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.2
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.3
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.2
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.3
\_SB_.LNKE irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.2
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.3
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.1
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.2
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.3
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
\_SB_.LNKD irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.2
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.3
pci0: <ACPI PCI bus> on pcib0
agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd800-0xd87f mem 0xdf000000-0xdf00007f irq 9 at device 9.0 on pci0
xl0: Ethernet address: 00:50:04:33:15:8b
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0:
sym0: <875> port 0xd400-0xd4ff mem 0xde000000-0xde000fff,0xde800000-0xde8000ff irq 10 at device 11.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
pci0: <display, VGA> at device 12.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xd7800000-0xd78000ff irq 9 at device 13.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:e0:7d:72:6d:7e
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <AcerLabs Aladdin ATA33 controller> port 0xb800-0xb80f at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
--=.LcxOUg4yPanid'
Content-Type: application/pgp-signature
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)
iD8DBQE94YZ1fCLDn4B6xToRArOUAJ4wkuHzkgMyTWtSF330DJUrSTcPbACfXyfF
1vOR/MTaKj9eMnfEoeFagZY=
=UzoX
-----END PGP SIGNATURE-----
--=.LcxOUg4yPanid'--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021125030948.7ce27adc.tilman>