Date: Thu, 24 Aug 1995 10:03:59 +0200 (MET DST) From: Luigi Rizzo <luigi@labinfo.iet.unipi.it> To: purna@cs.shizuoka.ac.jp Cc: hackers@freebsd.org Subject: Re: Help installing IDE CD-ROM driver Message-ID: <199508240804.KAA17371@labinfo.iet.unipi.it> In-Reply-To: <9508240309.AA01210@jaguar.cs.shizuoka.ac.jp> from "purna@cs.shizuoka.ac.jp" at Aug 24, 95 12:08:43 pm
next in thread | previous in thread | raw e-mail | index | archive | help
> Hi, there! > > I'm new at this mailing list. I'm sorry if this question is a FAQ. I just > tried installing IDE CD-ROM driver (I got from ftp://ftp.freebsd.org/pub/ > FreeBSD/incoming/wcd11.tgz) into FreeBSD 2.0.5ALPHA but with no success. > From the "dmesg", see below, I could see that at least the kernel recognized > the CD-ROM drive. But, it showed that the controller (atapi1.0) were not > ready so that I could not access the drive. > > ==> wdc1: unit 0 (atapi) : <CD-ROM CDR-C3 G>, removable, intr > ==> atapi1.0: controller not ready I get the same report on my systems (both 1.1 and 2.0.5) with a Sony CDU55 unit mounted as slave on the primary IDE. Nevertheless, I can mount wcd1a just fine. The only thing that does not work is the audio-cd support. > By the way, the following are about my system: > > - Gateway P5-120XL with: > - WD31600 HD set as a master in the primary IDE controller > - WD31200 HD set as a slave in the primary IDE controller > - Sanyo 3-Disk CD-ROM (3-CD Changer) drive set as a master > in the secondary IDE controller If you still have problems you can try to switch the WD31200 and the cdrom. Luigi ==================================================================== Luigi Rizzo Dip. di Ingegneria dell'Informazione email: luigi@iet.unipi.it Universita' di Pisa tel: +39-50-568533 via Diotisalvi 2, 56126 PISA (Italy) fax: +39-50-568522 http://www.iet.unipi.it/~luigi/ ====================================================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199508240804.KAA17371>